ADVANTECH PCN-6351
Specifications
BIOS
AWARD 2 Mbit Flash BIOS
Board Type
Half Size
Chipset
SiS 5582 (PCN-6351), SiS 5598 (PCN-6351L)
CPU
Intel Pentium processor up to 233 MHz; AMD K5, K6,K6-2 up to 300 MHz; Cyrix M1 PR166/200 GP, M2-300; IDT WinChip C6 up to 240 MHz
Dimensions
204 mm x 122 mm (8.03" x 4.8")
Display Controller
C&T 69000 / C&T 69030 supporting LCD and CRT displays
Display Resolution
Up to 1280 x 1024 @ 256 colors
Ethernet
(PCN-6351 only) RTL 8139. 10 Mbps/100Mbps
FDD
Supports up to two floppy disk
IDE
One Enhanced IDE interface, supports 2 IDE
IR
Supports up to 4 Mbps transfer rate
Max power requirements
+5 A @ 5 V & 100 mA @ +12 V
Operating Temperature
0° C ~ 60° C (32° F ~ 140°F)
Parallel
One parallel port , supports SPP/EPP/ECP
Processor
Intel Pentium
Serial
One RS-232, one RS-232/422/485
System Memory
One 168-pin DIMM RAM socket supports EDO/SDRAM memory modules from 8 MB to 128 MB
Features
- 10/100 Mbps Ethernet
- 512 KB PB SRAM cache memory
- Fast IrDA up to 4 Mbps
- NLX form factor accepts both PCI and ISA bus signals
- PCI VGA/LCD interface
- Supports Compact Flash disks
- Supports Pentium MMX CPUs, AMD K5, K6-300, and Cyrix M1, M2
- USB connector
Datasheet
Extracted Text
NLX Half-size Pentium MMX CPU Card with VGA/LCD, Ethernet & SSD PCN-6351/L DIMM socket for up LCD connector 36-bit to 128 MB EDO/ SDRAM LCD connector 18-bit AT Power LVDS out 18-bit Pentium CPU VGA connector 75 ~ 233 MHz 10/100 Base-T 5598 Ethernet connector Parallel port COM1 FDD connector COM2 EIDE connector PC/104 connector USB connector PS/2 connector Introduction Features • NLX form factor accepts both PCI and ISA bus signals The NLX form factor ® The PCN-6351/L is Advantech’s first NLX form factor half-size • Supports Pentium MMX CPUs, AMD K5, K6-300, and Cyrix CPU Card. The NLX form factor is an alliance-supported mother M1, M2 board standard which supports both PCI and ISA cards. This • PCI VGA/LCD interface provides systems with the option to upgrade to PCI bus devices while maintaining previous ISA investment. • 10/100 Mbps Ethernet The NLX’s specification physically separates PCI and ISA buses. • 512 KB PB SRAM cache memory This greatly improves system stability and effectively eliminates • Fast IrDA up to 4 Mbps signal interference from high volume PCI and ISA data • USB connector transmissions. • Supports Compact Flash disks Features The PCN-6351/L is a powerful CPU card fit for today’s industrial Specifications environment. With a wide range of features including Pentium MMX and AMD K6-2 CPUs, 512KB L2 cache memory, 36 Bit VGA/ • CPU: Intel Pentium processor up to 233 MHz; AMD K5, K6,K6-2 LCD, LVDS, 10/100 Base-T LAN, USB interface and one DIMM up to 300 MHz; Cyrix M1 PR166/200 GP, M2-300; IDT WinChip socket that supports up to a maximum of 128 MB of EDO or C6 up to 240 MHz SDRAM. The PCN-6351 is also equipped with a watchdog timer, • BIOS: AWARD 2 Mbit Flash BIOS, supports Plug&Play, APM1.2, SSD and PC/104 socket which are important for embedded and Ethernet boot ROM, boot from CD-ROM, LS-120, ZIP drive stand alone applications. • Chipset: SiS 5582 (PCN-6351), SiS 5598 (PCN-6351L) Complete NLX solutions nd • 2 level cache: 512 KB PB SRAM Advantech can provide complete system solution for NLX • System memory: One 168-pin DIMM RAM socket supports EDO/ applications. Other Advantech NLX products include the PCA- SDRAM memory modules from 8 MB to 128 MB 6106NP3 6-slot backplane with 1 NLX, 3 PCI and 2 ISA slots and • PCI IDE interface: One Enhanced IDE interface, supports 2 IDE the PCA-6104NP2 4-slot backplane with 1 NLX, 2 PCI and 1 ISA devices PIO mode 3,4 with bus mastering up to 14MB/sec. Ultra slots. Also the IPC-6806 is a series of 6 slot NLX chassis and the DMA model up to 33 MB/sec. IPC-644 is a series of 4 slot NLX chassis. • Floppy disk drive interface: Supports up to two floppy disk Additionally, Advantech has adopted the extended dynamic burn-in drives: 3½ " (720 KB or 1.44 MB) and/or 5¼ " (360 KB or 1.2 MB) testing process to produce their 8 layer board design. This creates • Parallel port: One parallel port , supports SPP/EPP/ECP a stable and consistent supply PCN-6351 boards while maintaining the high standard of quality that is necessary for • IR port: Supports up to 4 Mbps transfer rate today’s industrial applications. 2010635100 NEW PCN-6351/L • Serial ports: One RS-232, one RS-232/422/485 Solid State Disk • Watchdog timer: Can generate a system reset or IRQ 15. • Supports Compact Flash disk Software enabled/disabled. Time interval is from 1 ~ 63 seconds. Mechanic and Environmental Specifications Jumperless with run-time setup • Max. power requirement: • PC/104 connector: 16-bit PC/104 connector for PC/104 +5 A @ 5 V & 100 mA @ +12 V expansion module • Operating temperature: VGA Functions 0° C ~ 60° C (32° F ~ 140° F) PCN-6351 • Size: 204 mm x 122 mm (8.03" x 4.8") • Controller: C&T 69000 / C&T 69030 supporting LCD and CRT displays • Display memory: 2 MB SDRAM built-in (optional 4 MB with C&T Ordering Information 69030 chipset) qPCN-6351-00A1 • Display resolution: Up to 1280 x 1024 @ 256 colors NLX Half-size Pentium MMX CPU Card with VGA/LCD, Ethernet (16 million colors @ 4 MB) and SSD PCN-6351L qPCN-6351L-00A1 • Controller: SiS 5598 built-in VGA supporting CRT displays NLX Half-size Pentium MMX CPU Card with VGA and SSD qIPC-6806SNP3 • Display memory: Share system up to 4 MB 6-slot Wallmount Half-size IPC Chassis with PCA-6106NP3 • Display resolution: Up to 1280 x 1024 @ 256 colors Backplane (16 million colors @ 4 MB) qIPC-644NP2-80 4-slot compact IPC Chassis with PCA-6104NP2 & 80 W Power Ethernet Controller Functions Supply (PCN-6351 only) qPCA-6106NP3 • Controller: RTL 8139. 10 Mbps/100 Mbps 6-slot NLX Passive Backplane with 1 NLX, 3 PCI and 2 ISA Slots • I/O address switchless setting qPCA-6104NP2 • Connector type: RJ-45 4-slot NLX Passive Backplane with 1 NLX, 2 PCI and 1 ISA Slots • Boot ROM: Built-in system (optional) PCN-6351 Block Diagram Socket 7 512KB Hardware DIMM Processor Cache RAM Monitor SIS 5582 Core Logic PS2 KB VGA & 36-bit PS2 Mouse TFT LCD USB Primary Secondary Super Infrared IDE IDE I/O 100Base-T 3.5� HDD CFC LAN PCI BUS PC/104 Connector ISA BUS Note: All specifications are subject to change without notice
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCN-6351 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods