PCM-9580F - ADVANTECH

Description

Advantech PCM-9580F CPU Boards-Series Socket 478 Pentium 4 SBC w/10/100 LAN, 6x USB 2.0, CF, VGA/LVDS, CRT, TV-Out, 4x COM, PCI Slot

Part Number

PCM-9580F

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

EMBEDDED SINGLE BOARD COMPUTER » EBX & 5.25" SINGLE BOARD COMPUTER

Specifications

Audio

ICH4 support AC’97 2.0 compliant, Optional PCM-231A support Line-in, Line-out, MIC CD Audio in, Line out, Speaker out

Battery

Lithium 3 V/196 mAH

BIOS

AWARD® 512 kbit Flash BIOS

Cache Memory

Depend on CPU type from 256 to 512 KB

Chipset

Intel 845GV (845GV GMCH+ 82801 ICH4) 400/533 MHz FSB
Intel 845GV + Chrontel CH7017

Controller

Intel 82551ER [Intel 82551QM optional] (PCM-9580F) Intel® 82540EM (PCM-9580FG)

CPU

Socket 478 for Intel Celeron/Pentium 4 (up to Pentium 3.06 GHz)

Dimensions

203 x 146 mm (8" x 5.75") 0.85 kg (weight of total package)

Display Interface

N/A

Expansion Interface

1 PCI 2.2 with 32-bit/33 MHz slot

Gross Weight

4-bit Input/4-bit Output

I/O Chipset

2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS-232/422/485, 1 x LPT

Input

1 x RJ45 by cable

IR Interface

N/A

LCD Interface

2-Channel (48-bit) LVDS interface

Memory

8 MB up to 64 MB frame buffer using system memory

Operating Humidity

0% ~ 90% Relative Humidity, noncondensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F) for Pentium 4 up to 3.06 GHz

Power Consumption

Typical : +12 V_CPU @ 1.95 A, +5 V @ 0.37 A, +3.3 V @ 3.2 A, +12 V @ 0.1 A Max: +12 V_CPU @ 6.15 A, +5 V @ 0.41 A, +3.3 V @ 3.46 A, +12 V @ 0 A. (In HCT) +12 V_CPU @ 5.62 A, +5 V @ 0.41 A, +3.3 V @ 4.28 A, +12 V @ 0.11 A (QAPlus) (With 1 GB DDR DRAM,

Power Management

APM1.2, ACPI Support

Power Supply

+5 V ±5%, +12 V ± 5%, +3.3 V ± 5%

Processor

Intel Pentium 4

Resolutions

CRT Mode: Max. 1600 x 1200 x 32 bpp at 85 Hz

Speed

10/100 Mbps (PCM-9580F), 10/100/1000 Mbps (PCM-9580FG)

SSD

CompactFlash® card Type I/II

System Memory

Two 184-pin DIMM sockets, support Non-ECC Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB DDR200/266/333 DRAM

System Monitor

IEEE 802.3u 100BASE-T Fast Ethernet compatible (PCM-9580F) IEEE 802.3z/ab 1000 BASE-T Gigabit Ethernet compatible (PCM-9580FG)

TV-out

Supports both NTSC/PAL, S-video or Composite Video, optional by cable

USB

4 x USB 1.1/2.0 host ports, support for embedded USB Type I Flash memory, shared with USB port 3 and port 4

Watchdog Timer

255 level timer intervals by second or minute

Features

400/533 MHz FSB
Optional Audio Interface
Socket 478 up to 3.06 GHz Intel® Pentium® 4 (0 ~ 60° C)
Supports 2-channel 48-bit LVDS interface
Supports Embedded USB, 4 USB 2.0 ports
Supports Gigabit Ethernet (PCM-9580FG)

Datasheet

advantech-PCM-9580-ds1-1882154322.pdf

108 KiB

Download

Extracted Text

Socket 478 Intel® Pentium® 4 SBC PCM-9580 w/Gigabit LAN, USB 2.0, VGA/LVDS and 4 COM Features USB 1,2 Audio TV-out ATX power connector Ethernet USB 3,4 4COM LVDS  Socket 478 up to 3.06 GHz Intel® Pentium® 4 (0 ~ 60° C)  400/533 MHz FSB CRT Display  Supports Gigabit Ethernet (PCM-9580FG) ATX 12 V power connector  Supports Embedded USB, 4 USB 2.0 ports  Supports 2-channel 48-bit LVDS interface CF on solder Socket 478 up to 3.06 GHz  Optional Audio Interface LPT Pentium® 4 FDD 2nd IDE 1st IDE UDMA/100 GPIO 2 x DIMM up to 2 KB/Mouse Display Speciﬁcations  Chipset Intel 845GV + Chrontel CH7017  Memory Size 8 MB up to 64 MB frame buffer using system memory General  Resolution CRT Mode:  CPU Socket 478 for Intel Celeron/Pentium 4 (up to Pentium Max. 1600 x 1200 x 32 bpp at 85 Hz 3.06 GHz)  LCD Interface 2-Channel (48-bit) LVDS interface  2nd Cache Memory Depend on CPU type from 256 to 512 KB  TV-Out (Optional) Supports both NTSC/PAL, S-video or Composite  System Chipset Intel 845GV (845GV GMCH+ 82801 ICH4) Video, optional by cable 400/533 MHz FSB  Dual Independent N/A  BIOS AWARD® 512 kbit Flash BIOS Display  System Memory Two 184-pin DIMM sockets, support Non-ECC Double Data Rate (DDR)128 MB to 2 GB, accepts Mechanical and Environmental 128/256/512/1024 MB DDR200/266/333 DRAM  Dimension (L x W) 203 x 146 mm (8" x 5.75")  Power Management APM1.2, ACPI Support  Weight 0.85 kg (weight of total package)  SSD CompactFlash® card Type I/II  Operating Temperature 0 ~ 60° C (32 ~ 140° F) for Pentium 4 up to 3.06 GHz  WatchDog Timer 255 level timer intervals by second or minute  Operating Humidity 0% ~ 90% Relative Humidity, noncondensing  Expansion Interface 1 PCI 2.2 with 32-bit/33 MHz slot  Battery Lithium 3 V/196 mAH Power  Power Supply Voltage +5 V ±5%, +12 V ± 5%, +3.3 V ± 5% I/O  Power Consumption Typical : +12 V_CPU @ 1.95 A, +5 V @ 0.37 A, +3.3 V  I/O Interface 2 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, @ 3.2 A, +12 V @ 0.1 A 1 x Mouse, 3 x RS232, 1 x RS-232/422/485, 1 x LPT Max: +12 V_CPU @ 6.15 A, +5 V @ 0.41 A,  USB 4 x USB 1.1/2.0 host ports, support for embedded USB +3.3 V @ 3.46 A, +12 V @ 0 A. (In HCT) Type I Flash memory, shared with USB port 3 and port 4 +12 V_CPU @ 5.62 A, +5 V @ 0.41 A,  Audio ICH4 support AC’97 2.0 compliant, Optional +3.3 V @ 4.28 A, +12 V @ 0.11 A (QAPlus) PCM-231A support Line-in, Line-out, MIC CD Audio (With 1 GB DDR DRAM, Pentium 4 3.06 GHz) in, Line out, Speaker out  IrDA N/A Packing List  GPIO 4-bit Input/4-bit Output  1 x PCM-9580 SBC Ethernet  1 x Mini Jumper Pack [conts.: 10 pcs] (p/n: 9689000002)  Chipset Intel 82551ER [Intel 82551QM optional]  1 x Startup Manual (PCM-9580F)  1 x Utility CD Intel® 82540EM (PCM-9580FG)  Speed 10/100 Mbps (PCM-9580F), 10/100/1000 Mbps (PCM-9580FG)  Interface 1 x RJ45 by cable  Standard IEEE 802.3u 100BASE-T Fast Ethernet compatible (PCM-9580F) IEEE 802.3z/ab 1000 BASE-T Gigabit Ethernet compatible (PCM-9580FG) PC/104 Modules All product specifications are subject to change without notice Last updated : 20-Mar-2006 PCM-9580 Board Diagram Intel Pentium4 processor VGAConnector DDR LVDS Connector 845GV DIMM DVIConnector Codec TVConnector FDD PRN COM 1/2 Super LAN LAN I/O 4USB2.0 chip Connector KB/ Mouse Audio ICH4 codec IrDA Watch HW Dog 2IDE monitor Super I/O COM GPIO CF 3/4 PCISlot Ordering Information L2 Giga LPT/FDD/ Operation Part No. CPU CRT LVDS TV out 10/100 Audio USB2.0 RS-232 RS/232/422/485 CF PCI Slot Cache LAN KB/MS Temp. PCM-9580F-00A1E Socket 478 -- Yes 48 bit Yes 1 -- Yes 6 3 1 Yes Yes 1 0 ~ 60° C PCM-9580FG-00A1E Socket 478 -- Yes 48 bit Yes 1 -- Yes 6 3 1 Yes Yes 1 0 ~ 60° C Optional Accessories  PCM-10586-6000 Wiring Kit for PCM-9580F  PCM-10586-6G00 Wiring Kit for PCM-9580FG (Gigabit LAN)  PCM-231A-00A1 Audio out module  1703100121 USB cable 12 cm for MBPC-300 chassis  1700180170 USB cable 17 cm 2CH  1759214200 Pentium 4 CPU cooler with fan for 1U chassis Online Download www.advantech.com/products LPC PCIBus

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products