www.advanet.co.jp VME Bus series PowerPC CPU Board 7510 PowerPC 440GX CPU Board VME Bus 7510 PowerPC 440GX CPU Board Features This board is a VMEbus CPU board with an onboard PowerPC440GX by AMCC. The input/output interfaces are two Gigabit Ethernet(2ch), serial ports (4ch). Also, a variety of memory can be used, including SO-DIMM socket (DDR-SDRAM),CompactFlash, FLASH memory, SRAM, and EEPROM. The VME interface bus, which is an external bus, has an on-board Advanet PCI-VME bridge, the “NARUTO II.” The PMC module is also expandable, and is a single-board computer offering a broad array of applications. • VME bus CPU board with the on-board PowerPC440GX(667MHz) by AMCC • In addition to a 32 KB command/data L1-cache, on-chip SRAM (256kB) can be used as an L2 cache • Equipped with an SO-DIMM socket (DDR333, maximum 512MB, module is optional) • The main memory is dual port memory that also enables access from the VME bus • 4 on-board DMA controller channels and DMA transfer between main memory and PCI is enabled (on-board function of the CPU)- Equipped with 2 channel Gigabit Ethernet (CPU internal MAC + PHY, RJ-45×2) • Can use Compact Flash as the storage device (provied with socket; module is optional) • The RS232C serial port is equipped with 4ch (internal CPU functions (2ch) + external UART (2ch), RJ-45×4) • 512kB Boot ROM(FLASH Memory) Specifications • The 512kB SRAM and real time clock are backed up with a lithium battery CPU PowerPC440GX 667MHz by AMCC • Provided with 256B serial EEPROM (nonvolatile memory) • Equipped with a single 64bit/33MHz PMC slot, facilitating easy expansion of L1 cache:32KB/32KB, L2 cache:256KB various functions Memory Main Memory:Maximum 512MB (module is optional) • Interface with the VME bus by the Advanet PCI-VME bridge, “NARUTO II” SO-DIMM compatible with DDR266-333 can be installed • Can operate as a VME bus master or slave Boot ROM:512KB Flash Memory • 6U (double height), single slot width VME bus port • Operates with a single 5V power supply from the VME bus (accommodates Advanet T4th boot loader) Backup SRAM:512KB Block diagram Serial EEPROM:256B VME bus Peripheral Serial port×4ch (RJ-45) 10/100/1000BASE-T Ethernet ×2ch (RJ-45) PCI-VME PMC Slot×1 CLOCK DSW 32 32 bridge Battery backup RTC 8 NARUTOII CompactFlash Compatible with 3.3V module (the module is an option) PCI-VME Bridge [NARUTO II] (Advanet original) 64 64 72 SO-DIMM socket CPU PMC slot DDR266 - 333 VME bus Bus width: Complies with A32/A24/A16 PowerPC 440GX 512MB max. D32/D16/D08(EO)Rev.C.3 Ethernet x2 Functions VME bus master/slave, system controller, interrupter, interrupt RGMII PHY RJ-45 handler, system reset input/output RGMII Power Requirements DC5.0V±5% PHY RJ-45 I2C Voltage consumption DC5.0V:3A(max. Does not include PMC) SIO x2 8 8 Board size 6U, single slot 232C RJ-45 Lead-free compliant board EEPROM RTC 232C RJ-45 256B 8 8 8 8 8 SRAM CompactFlash Boot ROM registers UART 512KB Socket 512KB 5.0V POWER A 3.3V 5.0V POWER B 2.5V 5.0V POWER C 1.55V 2.5V POWER D 1.5V Note: The following specifications and product appearance are subject to change for enhancement without notice. ISO 9001 REGISTERED FIRM DNV CertiŢcation B.V., THE NETHERLANDS Certification: No.4016-1995-AQ-KOB-RvA Rev.1 Headquarters 616-4, Tanaka, Okayama 700-0951 JAPAN TEL +81-86-245-2861 FAX +81-86-245-2860 Tokyo Branch 3F, Hayakawa No.3 Building, 2-2Kanda-Tacho, Chiyoda-ku, Tokyo 101-0046 JAPAN ISO 14001 REGISTERED FIRM DNV CertiŢcation B.V., THE NETHERLANDS TEL +81-3-5294-1731 FAX +81-3-5294-1734 Certification: No.1426 -1999-AE-KOB - RvA