www.advanet.co.jp VME Bus series PowerPC CPU Board 7509 PowerPC 750FX CPU Board VME Bus 7509 PowerPC 750FX CPU Board Features Advme7509 is a single-slot 6U VME board utilizing a PowerPC750FX processor. The board can be used as a system controller to meet high performance system requirements. The front panel includes 2ch of 10/100BASE-TX Ethernet ports and 4ch RS232 serial ports. A variety of memory, including SDRAM (up to 512MB), CompactFlash, FlashROM, SRAM, and EEPROM are available. The external VME bus is accessible via the on-board “NARUTO II” PCI-VME bridge. • Single-slot 6U VME PowerPC processor board • Utilizing IBM PowerPC750FX (600MHz) CPU with 32K bytes L1 cache & 512k bytes L2 cache • Marvell’s Discovery I (GT-64260) system controller • Up to 512MB of dual-ported SDRAM (133.3MHz, EC/ECC) accessible from the VME bus • 8-ch DMA controller for high speed transfers between main memory and the internal PCI bus • 2-ch 10/100Base-TX Ethernet • 4-ch RS232C serial ports and 4-ch RJ-45 ports • 512k bytes Boot ROM FLASH memory accommodating an Advanet T4th boot loader • 512k bytes SRAM and real time clock, backed up with a lithium battery • Socket for CompactFlash memory • 256 bytes serial EEPROM (non-volatile memory) • A single 64-bit / 66MHz PMC slot Specifications • Interface with the VME bus sing Advanet’s “NARUTO II” PCI-VME bridge • Can operate as either a VME master or slave CPU IBM PowerPC750FX (600MHz ) • Requires a single 5V power supply from the VME bus L1 cache:32KB/32KB,L2 cache:512KB w/ parity Memory 256-512MB SDRAM (supports EC/ECC functions) 512KB Boot ROM Flash Memory (accommodating Advanet’s T4th boot loader) 512KB SRAM for backup 256 Bytes Serial EEPROM CompactFlash socket supporting 3.3V modules Block diagram Peripheral 4ch Serial ports (using RJ-45 connector) 2ch 10/100Base-T Ethernet (RJ-45) CPU Single 64-bit PMC sloto PowerPC 750FX SIO x2 Battery backup RTC EEPROM I2C RJ-45 PCI-VME Bridge [NARUTO II] (Advanet’s original) 256B 72 RS-232C 8 RJ-45 VME bus Bus width complies with A32/A24/A16 D32/D16/D08 (EO)Rev.C.3 DSW Functions as master/slave, system controller, interrupter, Ethernet x2 72 SDRAM System interrupt handler, system reset, input/output RJ-45 PHY 512MB max. Controller with ECC Power Requirements 5.0 VDC ±5% GT64260 RJ-45 PHY Voltage consumption 5.0VDC, 6.5A max. (Excluding PMC) Board size 6U, single-slot width 64 Lead-free compliant 32 64 CompactFlash PMC slot PCI bus Socket PCI bus (33MHz) 16 (33/66MHz) RTC 4 PCI-VME SRAM bridge 512KB 8 NARUTO? registers 8 32 VME bus UART 8 SIO x2 5.0V POWER A 3.3V RJ-45 3.3V POWER B 2.5V RS-232C 3.3V POWER C 1.8V RJ-45 5.0V POWER D 1.45V Note: The following specifications and product appearance are subject to change for enhancement without notice. ISO 9001 REGISTERED FIRM DNV CertiŢcation B.V., THE NETHERLANDS Certification: No.4016-1995-AQ-KOB-RvA Rev.1 Headquarters 616-4, Tanaka, Okayama 700-0951 JAPAN TEL +81-86-245-2861 FAX +81-86-245-2860 Tokyo Branch 3F, Hayakawa No.3 Building, 2-2Kanda-Tacho, Chiyoda-ku, Tokyo 101-0046 JAPAN ISO 14001 REGISTERED FIRM DNV CertiŢcation B.V., THE NETHERLANDS TEL +81-3-5294-1731 FAX +81-3-5294-1734 Certification: No.1426 -1999-AE-KOB - RvA