I25FB - 2.5" High Performance IDE Flash Disk The Adtron™ Flashpak™ model I25FB delivers high performance and durability with an industry standard ATA/ATAPI interface and UDMA-100 in a 2.5-inch IDE fl ash disk of- fering sustained read/write rates up to 80 MBytes/sec and capacities up to 56 GBytes. Designed with Adtron ArrayPro™ technology, the Adtron I25FB Flashpak disk performs under conditions of extended temperatures, high shock and vibration and rapid tem- perature gradients. The I25FB Flashpak disk uses Adtron SmartStorage™ architecture to deliver excep- tional sustained read/write performances and capacities to meet your demanding ap- plication needs. Adtron I25FB Flashpak fl ash disks are low profi le, 2.5-inch fl ash disks that provide the same storage functions found in hard disk drives, plus the enhanced operating reliability of long life mean time before failure (MTBF) and rugged durability. The industry PATA interface simplifi es the integration of fl ash storage into almost any computing platform and operating environment. I25FB Flashpak™ Data Storage Adtron Corporation 4415 E. Cotton Center Blvd., Suite 100 Europe: Zurich, Switzerland Phoenix, AZ 85040 Tel: +41-56-496-5640 • Fax: +41-56-496-5648 Tel: (602) 735-0300 • Fax: (602) 735-0359 Email: europe@adtron.com Email: info@adtron.com Web: http://www.adtron.com I25FB Up to 56 GBytes PRODUCT SPECIFICA PRODUCT SPECIFICATION TION 2.5" IDE Flash Disks CONTENTS STANDARD FEATURES .......................................1 OPTIONAL FEATURES.........................................2 APPLICATIONS.....................................................2 SECURE ERASE FUNCTIONALITY .....................3 Adtron™ EraSure™ Technology...............................3 EraSure Clear..............................................................3 EraSure Sanitize .........................................................3 Commands and Codes...............................................3 PHYSICAL CHARACTERISTICS .........................3 PERFORMANCE ...................................................3 RELIABILITY ........................................................4 ENVIRONMENTAL ................................................4 RECOMMENDED OPERATING CONDITIONS.....4 POWER REQUIREMENTS....................................4 IDE BUS DC CHARACTERISTICS ......................5 COMPLIANCE .......................................................5 PIN CONFIGURATION ..........................................6 Signal Connector Pinout............................................6 I25FB Connector Pinouts...........................................6 CONFIGURATION DESCRIPTIONS .....................7 PACKAGE DIMENSIONS......................................8 PACKAGE DIMENSIONS - 1 EXPANDER ............9 PACKAGE DIMENSIONS - 2 EXPANDER ..........10 PACKAGE DIMENSIONS - 3 EXPANDER ..........11 ORDERING INFORMATION................................12 Trademarks are the property of their respective owners. The information contained in this document is subject to change without notice and does not represent or imply warranty, and no liability is assumed by Adtron Corp. i February 2005 Rev. A Adtron Corporation • www Adtron Corporation • www.adtron.com • (602) 735-0300 .adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks STANDARD FEATURES The Adtron ™ I25FB Flashpak™ storage subsystem includes the following standard features: Form Factor 2.5-inch Solid State All solid state technology, no moving parts Technology Adtron ArrayPro™ flash array processing Interface Standard ATA/ATAPI-5, including UDMA-100 compliant Mounting Hard disk drive industry standard, all orientations Connector Standard IDE 44-pin, 2mm connector and interface Transfer Modes PIO Modes 0-4, Multiword DMA Modes 0-2, and UDMA Modes 0-5 are cur- rently supported Software Drivers No software drivers are required for full IDE disk support as a boot and data storage device Addressing 48-bit Logical Block Addressing supported Sectors Standard 512 byte sectors Error Detection and Reliability ensured by EDC and ECC defect management; ATA-compliant Correction Self Monitoring, Analysis, and Reporting Technology (S.M.A.R.T), support- ing thermal and vendor specific Firmware Field upgradable flash firmware prevents future obsolescence upgradable through an onboard serial port Input Voltage 5VCC +/- 5% Adtron EraSure™ Secure erase options include "clear"; and "sanitize" compliant with NISPOM Technology DoD 52220.22-M, NSA-130-2, Air Force AFSSI-5020, Army AR380-19 and Navy NAVSO P-5239-26 • LED indication for secure erase • Hardware or software initiation of secure erase function • Auto-resume after power interrupt Onboard LED Idle, Busy, and Fault conditions Operating Temperatures Commercial operating temperature range from 0 to +70ºC Industrial operating temperature range from -40ºC to +85ºC Warranty 3 Years Table 1 Standard Features 1 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks OPTIONAL FEATURES Customers may request the following optional features. Check with your Adtron representative for more infor- mation. • Extended sustained read/write rates • Non-standard capacity increments • PCB conformal coating • Remote LED capability • Write protect option • Password protect • Adtron™ EraSure™ Zap technology for complete physical destruction APPLICATIONS Below is a list of potential embedded applications in which the I25FB may be implemented: • C4ISR defense applications • Avionics • Video streaming • Instrumentation, test, and measurement • Factory automation and robotics • Ruggedized laptops • Telecommunications switches • Network routers 2 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks SECURE ERASE FUNCTIONALITY The task to secure data includes various levels of security and if the system is under threat of compromise, the data can be eliminated. Adtron™ EraSure™ Technology Adtron EraSure technology manages the elimination of data from storage systems, and can be applied at two security levels, each with unique attributes of security, speed, and reuse after data elimination. EraSure Clear The Adtron EraSure "Clear" is the lowest level of erase security. The EraSure Clear procedure is a bulk erase function of the flash array, and eliminates data in all non-volatile memory. The I25FB Flashpak™ flash disk supports a clear process with a time frame less than 20 seconds. EraSure Sanitize The Adtron EraSure "Sanitize" is the sanitization procedure that enables multiple overwrites in a custom or preprogrammed pattern across the entire flash disk capacity. The I25FB Flashpak flash disk supports a sani- tization rate up to 100 MB/sec, accomplished by the integration of Adtron ArrayPro™ and EraSure technolo- gies. A preselected customized or preprogrammed sanitization procedure can be configured to run from an external trigger. Commands and Codes EraSure technology operations are controlled by the Secure Erase Prepare (F3h) and Secure Erase Unit (F4h) commands found in the ATA Specification (Versions 3 - 7). PHYSICAL CHARACTERISTICS Parameter Value (Typ) Height 8.8mm [.346"] - (512MB to 8GB) 14.4mm [.568"] - (12GB to 24GB) 20.5mm [.807"] - (28GB to 40GB) 26.6mm [1.046"] - (44GB to 56GB) Depth 101.6mm [4.00"] Width 69.9mm [2.750"] Weight Contact Adtron Sales Table 2 PERFORMANCE Performance 512MB - 8GB 12GB - 16GB 20GB - 24GB 28GB - 56GB Item Start up times (Reset to Busy) 25 µs 25 µs 25 µs 25 µs Start up times (Reset to Not Busy) 5 sec (max) 5 sec (max) 5 sec (max) 5 sec (max) Read (Sustained) 20MB/sec 30 - 40MB/sec 50 - 60MB/sec 70 - 80MB/sec Write (Sustained) 20MB/sec 30 - 40MB/sec 50 - 60MB/sec 70 - 80MB/sec Read (Burst) 100MB/sec 100MB/sec 100MB/sec 100MB/sec Write (Burst) 100MB/sec 100MB/sec 100MB/sec 100MB/sec Table 3 3 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks RELIABILITY Item Value MTBF (Note 1) 250,000 hours 14 Bit Error Rate (BER) < 1 non-recoverable error in 10 bits read Write Endurance per Sector Minimum: 300,000 write/erase cycles Typical: > 1,000,000 write/erase cycles Read Endurance Unlimited Data Retention at 25˚C > 10 years Table 4 Note 1: Predicted by analysis performed per MIL-HDBK-217F, 30˚C. ENVIRONMENTAL Parameter Unit Relative Humidity (Note 2) 5% to 95%, noncondensing Altitude (Note 3) 24,384m (80,000ft) Operating Shock (SRS) (Note 4) 70g half-sine, 100-3000 Hz, 3X, 3 axes Operating Operating Vibration-random (Note 5) Helicopter: 2.9g rms, 3-500 Hz random, 3 axes Environments Jet: 10g rms, 5-2000 Hz random, 3 axes Jet: 16.4g rms, 10-2000 Hz random, 3 axes Table 5 Notes: 2 Testing in accordance with MIL-STD-810F, Method 507.4 3 Testing in accordance with MIL-STD-810F, Method 500.4 Procedure 1 4 Testing in accordance with MIL-STD-810F, Method 516.5 Procedure 1 5 Testing in accordance with MIL-STD-810F, Method 514.5 Procedure IV (modified) RECOMMENDED OPERATING CONDITIONS Parameter Symbol Min Typ Max Unit Vcc Vcc 4.75 5 5.25 V Commerical operating temperature Ta 0 25 70 ˚C Industrial operating temperature Ta -40 -- 85 ˚C Table 6 POWER REQUIREMENTS Parameter (Note 6) Value (Typical) Unit Value (Typical) Unit Sustained Read .400 A 2 W Sustained Write .400 A 2 W Startup 1.000 A -- -- Idle .350 A 1.75 W Clear (Secure Erase Function) .400 A 2 W Sanitize (Secure Erase Function) .400 A 2 W Table 7 Note 6: At 8 GByte capacity 4 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks IDE BUS DC CHARACTERISTICS Parameter Symbol Parameter Description Test Conditions Min Max Unit ViH Voltage Input High 2.0 Vcc + 0.5 V ViL Voltage Input Low VSS -0.5 0.8 V VoH Voltage Output High IOH = -4mA 2.4 VCC V VoL (Note 7) Voltage Output Low IOL = 4mA VSS 0.5 V Vcc Vcc -0.3 +6.0 V Vin, Vout All input/output voltages -0.3 Vcc +0.3 V C Capacitance 20.0 pF Table 8 Note 7: -DASP IOL is 12mA as per ATA/ATAPI-6 specification COMPLIANCE EMI CE, FCC Safety CE, UL Table 9 5 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks PIN CONFIGURATION Signal Connector Pinout I25FB Connector Pinouts Pin # Signal Pin # Signal Jumpers Power A J_-Slave B JP_GNDB 43 41 Pin 1 C A C JP_GNDC D J_CSEL_-EN 1 -RESET 2 GND 3 DB7 4 DB8 5 DB6 6 DB9 7 DB5 8 DB10 44 Key 42 D B 9 DB4 10 DB11 Figure 1 Connector Pinouts 11 DB3 12 DB12 13 DB2 14 DB13 15 DB1 15 DB14 17 DB0 18 DB15 19 GND 20 [KEY] Master - default C A 21 DMARQ 22 GND Jumpers off D B 23 -DIOW 24 GND 25 -DIOR 26 GND 27 IORDY 28 CSEL C A 29 -DMACK 30 GND Slave D B Jumpers A to B 31 INTRQ 32 -IOCS16 33 DA1 34 -PDIAG 35 DA0 36 DA2 37 -CS0 38 -CS1 C A CSEL 39 -DASP 40 GND D B Jumpers B to D 41 +5V 42 +5V Grayed pins are ground 43 GND 44 N/C Figure 2 Jumper Descriptions Table 10 Signal Connector Pinout Signals preceded with a dash (-) are active low as the asserted state. Signals without a dash are asserted high. 6 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks CONFIGURATION DESCRIPTIONS Signal Name Dir Pin Description DA[2:0] I 36, 33, 35 A2-A0 are used to select the one of eight registers in the Task File. -CS[1:0] I 38, 37 -CS0 is the chip select for the Task File registers while -CS1 is used to select the Alternative Status Register and the Device Control Register. CSEL I 28 This internally pulled-up signal is used to configure this device as a Master or a Slave, if J_CSEL_-EN is grounded by a jumper from B to D. When the pin is grounded, this device is configured as a Master. When the pin is open, this device is configured as a Slave. DB[15:0] I/O 18, 16, 14, 12, 10, All Task File operations occur in byte mode on the low order 8, 6, 4, 3, 5, 7, 9, bus DD[7:0] while all data transfers are 16 bit using DD[15:0]. 11, 13, 15, 17 -DASP I/O 39 This input/output is the Disk Active/Slave Present signal in the Master/Slave handshake protocol. DMARQ O 21 DMA transfer request. -DMACK I 29 DMA request acknowledge. -DIOW:STOP I 23 The I/O Write strobe pulse is used to clock I/O data on the Card Data bus into the Drive controller registers when the Drive is configured to use the I/O interface. The clocking will occur on the negative to positive edge of the signal (trailing edge). During Ultra DMA, this is the stop signal. -DIOR: I 25 This is an I/O Read strobe generated by the host. This signal HDMARDY/ gates I/O data onto the bus from the Drive. Ultra DMA control HSTROBE signal used to extend host transfer cycles. INTRQ O 31 Signal used to interrupt host when service is requested. -IOCS16 O 32 This output signal is asserted low when this device is expecting a word data transfer cycle. IORDY: O 27 This output signal may be used as IORDY. Ultra DMA control DDMARDY/ signal used to extend host transfer cycles. DSTROBE -PDIAG I/O 34 This input/output is the Pass Diagnostic signal in the Master/ Slave handshake protocol. -RESET I 1 This input pin is the active low hardware reset from the host. GND -- 2, 19, 22, 24, 26, Ground 30, 40, 43 Key -- 20 This pin is keyed so that the drive can only be connected with the cable pin 1 to drive pin 1. J_-SLAVE -- A Master/Slave Jumper J_CSEL_-EN -- D When low CSEL controls Master/Slave N/C -- 44 No connect +5V -- 42, 41 +5V JP_GNDB/ -- B, C Reserved for jumpers JP_GNDC Table 11 44-Pin Signal Description 7 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks PACKAGE DIMENSIONS Refer to the figure below for the enclosure and mounting dimensions of the I25FB 2.5" drive. Dimensions are shown in mm[inches]. 3.0 .118 Activity LED M3x0.5x3.0[0.118] Top View MAX. DEPTH (4X) JP1 - Reserved Side View 4.1 .160 61.7 2.430 Front View 10.1 .399 Figure 3 I25FB Package Dimensions 8 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 101.6 4.000 90.6 3.567 4.0 .157 14.0 .551 10.2 .403 8.8 .345 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks PACKAGE DIMENSIONS - 1 EXPANDER Refer to the figure below for the enclosure and mounting dimensions of the I25FB 2.5" drive. Dimensions are shown in mm[inches]. Activity LED JP1 - Reserved 4.1 .160 61.7 2.430 Figure 4 I25FB Package Dimensions 9 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 90.6 3.567 14.0 .551 14.4 .568 10.2 .403 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks PACKAGE DIMENSIONS - 2 EXPANDER Refer to the figure below for the enclosure and mounting dimensions of the I25FB 2.5" drive. Dimensions are shown in mm[inches]. Activity LED JP1 - Reserved 4.1 .160 61.7 2.430 Figure 5 I25FB Package Dimensions 10 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 90.6 3.567 14.0 .551 10.2 .403 20.5 .807 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks PACKAGE DIMENSIONS - 3 EXPANDER Refer to the figure below for the enclosure and mounting dimensions of the I25FB 2.5" drive. Dimensions are shown in mm[inches]. Activity LED JP1 - Reserved 4.1 .160 61.7 2.430 Figure 6 I25FB Package Dimensions 11 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300 90.6 3.567 14.0 .551 10.2 .403 26.6 1.046 I25FB Up to 56 GBytes PRODUCT SPECIFICATION 2.5" IDE Flash Disks ORDERING INFORMATION I25FB-CCCCT VV Configuration 10 = Standard Temperature Ranges C = 0 to 70°C I = -40 to 85°C Capacity Up to 56 GBytes Architecture Adtron "B" architecture Interface - Form Factor - Media IDE - 2.5" hard disk drive - Flash Capacity Options (G = GBytes) Height (Typ) 512(MBytes), 1G, 2G, 3G, 4G, 6G, 8G 8.8mm [.346"] 12G, 16G, 20G, 24G 14.4mm [.568"] 28G, 32G, 36G, 40G 20.5mm [.807"] 44G, 48G, 52G, 56G 26.6mm [1.046"] Adtron Corporation www.adtron.com 4415 E. Cotton Center Blvd., Suite 100 Phoenix, AZ 85040 Tel: (602) 735-0300 • Fax: (602) 735-0359 Email: info@adtron.com Made in the USA Trademarks are the property of their respective owners. The information contained in this document is subject to change without notice and does not represent or imply warranty, and no liability is assumed by Adtron Corp. 12 February 2005 Rev. A Adtron Corporation • www.adtron.com • (602) 735-0300