Elite.Parts chervon right Manufacturers chervon right A chervon right ACT/TECHNICO chervon right VX407
About product Specifications Features Datasheet FAQ

ACT/TECHNICO VX407

Image of ACT/TECHNICO VX407

Description

6U VME and VXS Intel Core 2 Duo Single Board Computer

Part Number

VX407

Price

Request Quote

Manufacturer

ACT/TECHNICO

Lead Time

Request Quote

Category

SINGLE BOARD COMPUTER »  SBC CPCI (POWERPC)

Specifications

CPU

2.16 GHz Intel Core 2 Duo processor T7400: uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) package 1.5 GHz Intel Core 2 Duo processor L7400: uses uFC-BGA 478 (micro Flip-Chip Ball Grid Array) package common dual-core processor features are: 667 MHz Front Side Bus 64 Kbytes of primary (L1) on-die cache 4 Mbytes of shared secondary (L2) on-die cache Intel 64 Technology (64-bit computing) no CPU fan; low power processor 2.0 GHz and 1.66 GHz Intel Core Duo versions available; utilizes mobile Intel 945 GME Express chipset provision for XDP debug port

Dimensions

supporting up to 4 Gbytes of 667MHz DDR2 SDRAM soldered on board: peak bandwidth of 10.6 Gbytes/s dual channel architecture accessible from processor and VME bus

Environment

operating temperatures: 0C to +55C (N-series: 1.5 GHz/2.16 GHz) -25C to +70C (E-series: 1.5 GHz) -40C to +85C (K-series: 1.5 GHz) storage temperature: -40C to +85C 10% to 90% Relative Humidity, non-condensing (operating or storage): K-series includes humidity sealant

Ethernet

2x rear I/O interfaces: implemented by Intel 82571EB controller 2x10/100/1000 Mbps Ethernet channels when P0 not fitted, accessed via P2 for either VME64x or XVS backplanes; or: 2x1000Mbps baseband IEEE 802.3 backplane ports, accessed via VXS P0 connector for VITA 41.3 on a VXS backplane 1x ethernet channel accessed via front panel RJ45 connector: implemented by Intel 82573L controller supports 10/100/1000 Mbps

Expansion Interface

+5V@7.5A (typical at 2.16 GHz with 2 Gbytes SDRAM) +3.3V, 12V and -12V not utilized +12V and -12V routed to PMC expansion slot

FDD

Phoenix TrustedCore Server BIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included

Form Factor

1 Mbyte of BIOS flash EPROM 1 Mbyte of flash EPROM

Gross Weight

implemented by Intel 945GME Express chipset analog VGA accessed via a 15-way high-density connector on front panel or P2: resolutions up to 2048x1536@16M colors flat panel supported by a panel link interface via P2 connector: resolutions up to 1600x1200@16M colors

IDE Interface

2x EIDE interfaces: supports up to Ultra-DMA 100 for high performance drives Second EIDE interface can be used for on board 2.5 inch disk drive or CompactFlash or Microdrive type II drive primary channel supports up to two off-board EIDE drives via a P2 connector transfer rate up to 150 Mbytes/s

Memory

6U form factor: 9.2inches x 6.3inches (233mm x 160mm) single-slot: 0.8 inches (20.3mm) utilizes 160-way connectors for P1 and P2 optional P0 (for VXS backplanes only) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)

OS

keyboard and mouse interfaces via a single PS/2 connector on front panel and via P2 connector floppy disk interface via P2 connector 5x USB 2.0 (Universal Serial Bus) interfaces: 2x USB interfaces accessed via USB connectors on front panel 1x USB interface via P2 connector 2x USB interfaces via VXS P0 connector 3x general purpose I/O bits via P2 connector PC Real Time Clock (Year 2000 compliant) 1x32-bit Long Duration Timer with processor interrupt capability; watchdog timer

Power Connector

1x PMC slot supporting: I/O via front panel 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V PCI signaling XMC (PCI-Express Mezzanine Card) interface supported via x1 PCI Express link option for dual PMC carrier board using baseboard XMC connector (uses PMC site)

SATA

PCB (PWB) manufactured with flammability rating of 94V-0

Serial

2x RS232/RS422/RS485 serial channels: 1x channel accessed via a 9-way D type connector on the front panel 1x channel via P2 connector 16550 compatible UART's both channels can be user configured for RS232, RS422, or RS485

Socket

support for Linux, Windows 2000, Windows XP, Windows XP Embedded, VxWorks, Solaris, and QNX

Storage Temperature

AC97 interface on VXS P0 supports High Definition Audio (HDA) Codec on breakout independant legacy speaker output via P2

Video Interface

compatible with VME, VME64x, and VXS: P1 and P2 connectors compatible with VME (1.5 GHz only), VME64x and VXS systems P0 connector compatible with VXS systems uses the Tundra Universe IID device VME Master/Slave A32/A24/A16/D64/D32/D16/D8 (E0)/MBLT64 fast hardware byte swapping auto system controller detect full interrupter/interrupter handler support bus error interrupt hardware

Features

Datasheet

pdf file

vx40704x_110-6374780757.pdf

139 KiB

Extracted Text

Intel® Core™ 2 Duo Processor Single Board Computer RoHS 2002/95/EC APPLICATIONS The VX 407/04x is a PC-compatible high performance VXS VX 407/04x is suitable for a range of demanding single board computer supporting the 2.16 GHz and applications within the industrial control, defense, 1.5 GHz Intel® Core™ 2 Duo processors which contain telecomms, telemetry, scientific and aerospace markets. two CPU cores and shared L2 cache. The board features Its functionality can be further increased through the up to 4 Gbytes DDR2 synchronous DRAM and a variety of use of PMC modules. To simplify the board’s integration interfaces including an option for an on-board Hard Disk many popular industry standard operating systems are Drive, CompactFlash™ or Hitachi GST MicroDrive™. The supported. The board is fully plug compatible with the VX 407/04x supports VITA 41.3 on VXS backplanes, or VX 405/04x family. For backwards compatibility, the when the P0 connector is not fitted it will support dual board is P2 plug compatible with the VP 305/01x and Gigabit Ethernet on either VXS or VME64 backplanes. The VP 307/01x families (without P0 connector). HIGHLIGHTS � 2.16 GHz or 1.5 GHz Intel Core 2 Duo processor: � 1 Mbyte of BIOS Flash EPROM dual-core processor - � 32/64-bit PMC module interface, operating at 33/66 MHz: 667 MHz Front Side Bus - 1 x XMC module interface (x1 PCI Express™) - 64 Kbytes L1 cache - � Front panel and P2 I/O combinations available: 4 Mbytes shared L2 cache - analog and digital graphics interfaces - Intel® 64 Technology (64-bit computing) - keyboard and mouse interfaces - passive heatsink - 2 x RS232/RS422/RS485 serial channels - � 2.0 GHz and 1.66 GHz Intel® Core™ Duo processor 5 x Universal Serial Bus (USB) ports - versions available; see VX 405/04x datasheet � Floppy disk interface � Up to 4 Gbytes of 667MHz DDR2 SDRAM � Watchdog timer and Long Duration Timer � High performance SATA interface � VME64 Interface supporting � EIDE interfaces with support for on-board CompactFlash, A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with MicroDrive or optional on-board disk drive (in a single support for fast hardware byte-swapping slot) � Single slot � Options for networking via rear I/O; either: � Extended temperature versions planned: 2 x 10/100/1000Mbps Ethernet channels via P2 - -25°C to +70°C (E-Series) - or: -40°C to +85°C (K-Series, includes humidity sealant) - 2 x 1000Mbps baseband IEEE 802.3 backplane ports via - supporting 1.5 GHz processor - P0 for VITA 41.3 on VXS backplanes � Support for Linux®, Windows® 2000, Windows® XP, � 1 x 10/100/1000Mbps front panel Ethernet interface Windows® XP Embedded, VxWorks®, Solaris™ and QNX® 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 6 Tower Office Park, Woburn, MA 01801, USA TECHNOLOGIES Tel: (781) 933 5900 Fax: (781) 933 5911 x1 x1 x1 x1 32-bit PCI Bus Central Processor 1 x RS232/ 2 x Universal Analog 1 x Ethernet PMC Serial Bus RS422/RS485 Graphics 10/100/1000Mbps Interface � 2.16GHz Intel® Core™ 2 Duo processor T7400:- � uses �FC-PGA 478 (micro Flip-Chip Pin Grid Keyboard Mouse Array) package Serial Intel Interface Interface 5xUSB Interface 82573L P2 P2 P0 P2 � 1.5GHz Intel® Core™ 2 Duo processor L7400:- � uses �FC-BGA 478 (micro Flip-Chip Ball Grid BIOS Array) package Real-Time Front/Rear 3V Flash ICH7-M P0 Clock Interface EPROM � common dual-core processor features are:- Bridge � 667 MHz Front Side Bus Intel Flash Intel SATA Core Duo/ � 64 Kbytes of primary (L1) on-die cache EPROM 945GME Core 2 Duo � 4 Mbytes of shared secondary (L2) on-die cache Stereo DDR2 Universe II Audio CF SDRAM or � Intel® 64 Technology (64-bit computing) TM � no CPU fan; low power processor � 2.0 GHz and 1.66 GHz Intel® Core™ Duo Floppy Front/Rear Panel Intel Byte Serial EIDE Disk P2 Interface Interfaces Swap Interface Link 82571EB Interface versions available; see VX 405/04x datasheet � utilizes mobile Intel® 945GME Express chipset � provision for XDP debug port 2x AC'97 1 x RS232/ 1xUSB Mouse DVI VME USB Audio RS422/RS485 Keyboard Analog P2 (2 x Ethernet DRAM 1x EIDE Graphics 10/100/1000Mbps) SATA or P0 (VITA 41.3) � supporting up to 4 Gbytes of 667MHz DDR2 P2 = PCI Express Link P0 SDRAM soldered on-board:- � peak bandwidth of 10.6 Gbytes/s PMC/XMC Interface VME Interface � dual channel architecture � 1 x PMC slot supporting:- � compatible with VME, VME64x and VXS:- � accessible from processor and VME bus � I/O via front panel � P1 and P2 connectors compatible with VME (1.5 GHz only), VME64x and VXS systems Hard Disk Interfaces � 32/64-bit, 33/66 MHz PCI operation � 2 x EIDE interfaces:- � P0 connector compatible with VXS systems � 3.3V or 5V PCI signaling � supports up to Ultra-DMA 100 for high � XMC (PCI-Express Mezzanine Card) interface � uses the Tundra® Universe IID™ device performance drives supported via x1 PCI Express® Link � VME Master/Slave � second EIDE interface can be used for � option for dual PMC carrier board using � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 on-board 2.5 inch disk drive or baseboard XMC connector (uses PMC site) � fast hardware byte swapping CompactFlash™ or Microdrive™ Type II drive � auto system controller detect Serial Interfaces � primary channel supports up to two � full interrupter / interrupt handler support � 2 x RS232/RS422/RS485 serial channels:- off-board EIDE drives via P2 connector � bus error interrupt hardware � 1 x channel accessed via a 9-way D-type � 1 xSerial ATA150 interface:- connector on the front panel � accessible via VXS P0 connector Electrical Specification � 1 x channel via P2 connector � transfer rate up to 150 Mbytes/s � +5V@7.5A (typical at 2.16 GHz with 2 Gbytes � 16550 compatible UARTs SDRAM) Ethernet Interfaces � both channels can be user configured for � +3.3V, +12V and -12V not utilized � 2 x rear I/O interfaces:- RS232, RS422 or RS485 � +12V and -12V routed to PMC expansion slot � implemented by Intel® 82571EB Controller Other Peripheral Interfaces � 2 x 10/100/1000Mbps Ethernet channels Environmental Specification � keyboard and mouse interfaces via a single when P0 not fitted, accessed via P2 for � operating temperatures:- PS/2™ connector on front panel and via P2 either VME64x or VXS backplanes; or � 0°C to +55°C (N-Series: 1.5 GHz / 2.16 GHz) connector � 2 x 1000Mbps baseband IEEE 802.3 � -25°C to +70°C (E-Series: 1.5 GHz) � floppy disk interface via P2 connector backplane ports, accessed via VXS P0 � -40°C to +85°C (K-Series: 1.5 GHz) � 5 x USB 2.0 (Universal Serial Bus) interfaces:- connector for VITA 41.3 on a VXS backplane � storage temperature: -40°C to +85°C � 2 x USB interfaces accessed via USB � 1 x Ethernet channel accessed via front panel � 10% to 90% Relative Humidity, non connectors on front panel RJ45 connector:- condensing (operating or storage):- � 1 x USB interface via P2 connector � implemented by Intel® 82573L Controller � K-Series includes humidity sealant � 2 x USB interfaces via VXS P0 connector � supports 10/100/1000Mbps Mechanical Specification � 3 x General Purpose I/O bits via P2 connector Graphics Interface � 6U form-factor 9.2 inches x 6.3 inches � PC Real Time Clock (Year 2000 compliant) � implemented by Intel 945GME Express chipset (233mm x 160mm) � 1 x 32-bit Long Duration Timer with processor � analog VGA accessed via a 15-way high density � single slot: 0.8 inches (20.3mm) interrupt capability; watchdog timer connector on front panel or P2:- � utilizes 160-way connectors for P1 and P2 Firmware Support � resolutions up to 2048 x 1536 @ 16M colors � optional P0 (for VXS backplanes only) � Phoenix® TrustedCore® Server BIOS � flat panel supported by a Panel Link interface � shock: 20g, 11ms, ½ sine (operating); via P2 connector:- � comprehensive Power-On Self-Test (POST) 30g, 11ms, ½ sine (non-operating) � resolutions up to 1600 x 1200 @ 16M colors � LAN boot firmware included � vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating); Stereo Audio Software Support 5Hz-2000Hz at 5g, 0.76mm peak displacement � AC'97 interface on VXS P0 supports High � support for Linux®, Windows® 2000, (non-operating) Definition Audio (HDA) Codec on breakout Windows® XP, Windows® XP Embedded, � independent legacy speaker output via P2 VxWorks®, Solaris™ and QNX® selected variants (1, 2 and5) are supplied with VME64x handles Safety Flash EPROM 5-row backplane is required to provide � PCB (PWB) manufactured with flammability � 1 Mbyte of BIOS Flash EPROM P2 access to dual Ethernet, CRT, keyboard, rating of 94V-0 � 1 Mbyte of Flash EPROM mouse, USB, legacy speaker and GP I/O ports ORDERING INFORMATION VX 407/041-xy 1.5 GHz Core 2 Duo Processor L7400 VX 407/042-xy 2.16 GHz Core 2 Duo Processor T7400 1 - Same as x = 2. Also includes AD VP2/009-10 breakout 1 - reserved 2 - 5-row only: P2 I/O = 2 x 10/100/1000 Ethernet ++ 2 - 2 Gbytes 4 - 3-row, EIDE, FDC, 1xRS232/422/485 (1.5 GHz only)** 3 - reserved AD VP2/015-10 RTM for VME64x or VXS backplane: use when x=2 5 - 5 row only: VXS P0 I/O = VITA 41.3, 2 x USB, 4 - 4 Gbytes AD VP2/015-30 RTM (with HDA Codec) for VXS backplane: use when x=5 1 x SerialATA, AC’97 audio. P2 I/O ++ AD CR3/PMC-zz PMC Carrier Board for 2 PMC modules (front/rear I/O) AD CP1/DR1-z0 2.5 inch Hard Disk Drive (HDD) assembly ++ when x = 1, 2 or 5, P2 I/O = EIDE, FDC, keyboard, mouse, 1xUSB DS MSS/00x-zzU Board with HDD, CD-RW/DVD, CompactFlash, FDD DVI-D, VGA, speaker,3xGPIO and 1xRS232 ** when x = 4, also includes AD VP2/006-40 breakout For z options please contact your local sales office. For extended temperature, 1.5 GHz E and K-Series, please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1549/1107 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2007 64-bit PCI Bus PMC Module XMC

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the VX407 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

ACT Technico CPCI-6020 Emerson CompactPCI Host Slot Processor Board

product

Concurrent Technologies VP347 Single Board Computer. 6U VME Intel Pentium M

product

6U VME Intel Core Duo Single Board Computer

product

6U VME and VXS Intel Core 2 Duo Single Board Computer

product

6U VME Intel Core 2 Duo Single Board Computer

product

6U VME or VXS Dual-Core Intel Xeon Dual Single Board Computer