Elite.Parts chervon right Manufacturers chervon right A chervon right ACT/TECHNICO chervon right VP315
About product Specifications Features Datasheet FAQ

ACT/TECHNICO VP315

Image of ACT/TECHNICO VP315

Description

Act Technico VP315 CPU Board with 1.6 GHz or 1.1 GHz Intel Pentium M Processor based Dual PMC Embedded Controller VITA 31.1 Compliant

Part Number

VP315

Price

Request Quote

Manufacturer

ACT/TECHNICO

Lead Time

Request Quote

Category

SINGLE BOARD COMPUTER »  SBC CPCI (POWERPC)

Specifications

CPU

Intel Pentium M processor operating at 1.6 GHz or 1.1 GHz: 1.6GHz uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) package 1.1 GHz uses uFC-BGA 479 (micro Flip-Chip Ball Grid Array) package 64 Kbytes of primary (L1) on-die cache 1 Mbyte of secondary (L2) on-die cache 400 MHz Front Side Bus (FSB) 1.8 GHz processor version available no CPU fan utilizes 64-bit Intel 855GME chipset: supports 400MHz bus frequency utilizes Intel 6300ESB I/O controller hub ITP debug port

Dimensions

supporting up to 1 Gbyte of 266 MHz DDR ECC SDRAM soldered on board single bit error protection; double-bit error detection accessible from processor or VME bus

Environment

0C to +55C (operating) 10% to 90% Relative Humidity, non-condensing (operating) -40C to +85C (storage) 10% to 90% Relative Humidity, non-condensing (storage)

Ethernet

implemented by an Intel 82546GB LAN controller via 64-bit/66MHz PCI bus two interfaces supporting 10 Base-T, 100 Base-TX, 1000 Base-T: both interfaces accessed via optional P0 one channel switchable to front panel RJ45 support for VITA 31.1: Gigabit ethernet for VME64x backplanes

Expansion Interface

+5V@3.3A (typical at 1.6 GHz with 512Mbytes DRAM) +12V@0A; -12V@0A +12V and -12V routed to both PMC sites and PMC expansion connector

FDD

Phoenix BIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included

Form Factor

64Mbytes application flash EPROM 512 Kbytes of BIOS Flash EPROM

Gross Weight

implemented by an Intel 855GME GMCH host bridge providing: resolutions up to 2048x1536@75Hz up to 16M colors accessed via a 26-way high-density connector on front panel analog graphics interface supported via optional P0

Keyboard/Mouse

supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via P2 connector: connects to an optional hard disk/flash/CD-ROM drive board secondary channel can be used for on-board disk drive or dual CompactFlash/Microdrive Type II drive carrier

Memory

6U form factor single VME slot- front panel width 0.8inch (20.3mm) utilizes 160-way DIN connectors for P1 and P2: compatible with normal 96-way DIN connectors optional P0 (optional for VME64x backplanes only) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating)

OS

PC-compatible Real Time Clock (Year 2000 compliant) 2x USB 2.0 interfaces, one via P2 connector and one via optional P0 keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector watchdog timer 1x32-bit Long Duration Timer with processor interrupt capability

Power Connector

2x PMC sites and for both sites: I/O via front panel, via P2 for site 1 and optionally via P0 for site 2 32/64-bit and 33/66 MHz PCI operation 3.3V or 5V PCI signaling expansion to optional dual PMC carrier board: using expansion connector (32-bit, 33 MHz) or using one baseboard PMC site (64-bit, 66 MHz)

SATA

PCB (PWB) manufactured with flammability rating of 94V-0

Serial

3x serial channel interfaces 16550 compatible UART front panel access: 1x RS232 via a 26-way high-density connector rear panel access: 2x RS232/422/485, both via P2
Serial ATA interface: one SATA port via P0 supports up to 150 Mbytes/s transfer rates

Socket

support for VxWorks, Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, RTX, QNX, Solaris, LynxOS and MS-DOS

Video Interface

implemented using Tundra Universe II device A32/A24/A16/D64/D32/D16D/D8(E0)/MBLT64 fast hardware byte swapping auto system controller detect full interrupter/interrupter handler support bus error interrupt hardware

Features

Datasheet

pdf file

vp31502-215146575x.pdf

115 KiB

Extracted Text

Intel® Pentium® M Processor Dual PMC Embedded Controller APPLICATIONS The VP 315/02x is a PC-compatible high performance, The VP 315/02x is suitable for a range of demanding high functionality VME processor board supporting the applications within the defense, industrial control, 1.6 GHz or 1.1 GHz Intel® Pentium® M Processor. This telecomms, telemetry, scientific and aerospace mar- single slot board features 2 PMC sites, up to 1 Gbyte of kets. To simplify the board’s integration many popular soldered DDR ECC SDRAM and a variety of interfaces in- industry standard operating systems are supported. cluding an option for an on-board Hard Disk Drive, The board is plug compatible with the VP 317/02x CompactFlash™ or Hitachi GST MicroDrive™. family. HIGHLIGHTS � 1.6 GHz or 1.1 GHz Intel Pentium M Processor: � High resolution graphics interface - 64 Kbytes L1 cache � Keyboard and Mouse interfaces - 1 Mbyte L2 cache � Up to 3 x serial channel interfaces - no CPU fan needed; low power processor � Up to 2 x Universal Serial Bus (USB 2.0) interfaces � 1.8 GHz processor version available; see VP 317/02x datasheet � Watchdog timer � Up to 1 Gbyte of 266 MHz DDR ECC SDRAM � Long Duration Timer � High performance EIDE interfaces with optional on-board � VME-64 Interface supporting disk drive or optional dual CompactFlash or MicroDrive A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with carrier (in a single slot) support for fast hardware byte-swapping � Serial ATA interface: � Single slot - Up to 150 Mbytes/s transfer rates � Extended temperature versions: � 2 x PMC module interfaces(32/64-bit and 33/66 MHz): - see VP 315/021-E/K datasheet - Expansion carrier for 2 more PMC sites - rugged version planned (VP 315/02x-R) � 2 x 10/100/1000 Mbps Ethernet interfaces: � Support for VxWorks®, Linux®, Windows NT®, - Gigabit Ethernet for VME64x backplane Windows® 2000, Windows® XP Embedded, � 64 Mbytes of Application Flash EPROM Windows® XP, RTX®, QNX®, Solaris™, LynxOS® and MS-DOS® � 512 Kbytes of BIOS Flash EPROM 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA Tel: (734) 971 6309 Fax: (734) 971 6350 Ethernet Central Processor 10/100/ 32-bit PMC 1 x RS232 1000Mbps Graphics PMC PMC Expansion � Intel® Pentium® M Processor operating at 1.6 GHz or 1.1 GHz:- Keyboard Mouse � 1.6 GHz uses �FC-PGA 478 Intel 1 x Serial Interface Interface I/O 82546GB 3V P0 P0 (micro Flip-Chip Pin Grid Array) package � 1.1 GHz uses �FC-BGA 479 Real-Time 64-bit (micro Flip-Chip Ball Grid Array) package Clock BIOS PCI Flash Bus � 64 Kbytes of primary (Level 1) on-die cache EPROM 6300ESB Application ICH � 1 Mbyte of secondary (Level 2) on-die cache Flash EPROM Hub Link � 400 MHz Front Side Bus (FSB) 1 x Serial Pentium M � 1.8 GHz processor version available; Universe II CF ATA Processor Intel or see VP 317/02x datasheet TM 855GME � no CPU fan Soldered DDR P2 SODIMM � utilizes 64-bit Intel® 855GME chipset:- Byte EIDE 2xUSB 2 x Serial Interfaces Swap P0 I/O � supports 400 MHz bus frequency Keyboard Mouse � utilizes Intel® 6300ESB I/O Controller Hub � ITP debug port 2xRS232/ EIDE USB USB P2 VME 2 x Ethernet KBD Graphics PMC DRAM PMC 422/485 10/100/1000 I/O I/O (VITA 31.1) SATA � supporting up to 1 Gbyte of 266 MHz DDR ECC P2 Optional P0 SDRAM soldered on the board � single bit error correction; double-bit error detection Serial Interface Electrical Specification � accessible from processor or VME bus � 3 x serial channel interfaces � +5V@3.3A (typical at 1.6 GHz with 512 Mbytes DRAM) � 16550 compatible UART EIDE Hard Disk Interfaces � +12V@0A; -12V@0A � supports up to Ultra-DMA 100 for high � front panel access:- performance drives � +12V and -12V routed to both PMC sites � 1 x RS232 via 26-way high density and PMC expansion connector � two channels (primary and secondary) connector � primary channel is accessible via P2 connector:- � rear panel access:- Environmental Specification � 2 x RS232/422/485, both via P2 � connects to an optional � 0°C to +55°C (operating):- (see Note 2) hard disk/flash/CD-ROM drive board � for extended temperature see � secondary channel can be used for on-boarddisk VP 315/021-E/K Flash EPROM drive or dual CompactFlash/MicroDrive Type II � rugged version planned � 64 Mbytes Application Flash EPROM drive carrier (VP 315/02x-R) � 512 Kbytes of BIOS Flash EPROM � 10% to 90% Relative Humidity, non Serial ATA (SATA) Interface Other Peripheral Interfaces condensing (operating) � Serial ATA interface:- � PC-compatible Real Time Clock (Year 2000 � -40°C to +85°C (storage) � one SATA port via P0 compliant) � 10% to 90% Relative Humidity, non � supports up to 150 Mbytes/s transfer rates � 2 x USB 2.0 interfaces, one via P2 connector condensing (storage) Ethernet Interface and one via optional P0 Safety � implemented by Intel 82546GB LAN Controller � keyboard and mouse interfaces � PCB (PWB) manufactured with flammability accessed via a 26-way high-density via 64-bit/66 MHz PCI bus rating of 94V-0 connector on front panel and � two interfaces supporting 10 Base-T, optionally via P0 connector 100 Base-TX, 1000Base-T:- Mechanical Specification � watchdog timer � both interfaces accessed via optional P0 � 6U form-factor � 1 x 32-bit Long Duration Timer with � one channel switchable to front panel RJ45 � single VME slot - front panel width 0.8inch processor interrupt capability � support for VITA 31.1:- (20.3mm) � Gigabit Ethernet for VME64x backplanes Software Support � utilizes 160-way DIN connectors for P1 and P2:- � support for VxWorks, Linux, Windows NT, Graphics Interface Windows 2000, Windows XP Embedded, � compatible with normal 96-way DIN � implemented by the Intel 855GME GMCH host connectors Windows XP, RTX, QNX, Solaris, bridge providing:- LynxOS and MS-DOS � optional P0 (optional for VME64x � resolutions up to 2048 x 1536 @75Hz backplanes only) � up to 16M colors Firmware Support � shock: 20g, 11ms, ½ sine (operating); � accessed via a 26-way high-density connector � Phoenix® BIOS 30g, 11ms, ½ sine (non-operating) on front panel � comprehensive Power-On Self-Test (POST) � vibration: 5Hz-2000Hz at 2g, 0.38mm peak � analog graphics interface supported via � LAN boot firmware included displacement (operating); optional P0 5Hz-2000Hz at 5g, 0.76mm peak VME Interface displacement (non-operating) PMC Interface � implemented using Tundra® Universe II™ � 2 x PMC sites and for both sites:- device � I/O via front panel, via P2 for site 1 (see � VME Master/Slave specific variants are supplied with Note 2) and optionally via P0 for site 2 � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 VME64x handles � 32/64-bit and 33/66 MHz PCI operation � fast hardware byte swapping Note 2: 5-row backplane is required to � 3.3V or 5V PCI signaling � auto system controller detect provide P2 access to � expansion to optional dual PMC carrier board:- � full interrupter / interrupt handler support 2 x RS232/422/485 interfaces and full � using expansion connector (32-bit/33 MHz) 64-bit PMC I/O for PMC site 1 � bus error interrupt hardware � or using one baseboard PMC site (64-bit/66 MHz) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (-xy) with selections from the following: VP 315/021-xy 1.1 GHz Pentium M with 2 PMC sites Where x = P2/P0 Breakout combinations Where y = memory size VP 315/022-xy 1.6 GHz Pentium M with 2 PMC sites AD CP1/DR1-z2 2.5 inch Hard Disk Drive Assembly 1- 3-row I/O, P2= PMC1 32-bit, EIDE, USB 1 - 512 Mbytes AD 200/001-01 Dual CompactFlash/MicroDrive Carrier 2- 5-row I/O, P2= PMC1 64-bit, EIDE, USB, 2xRS232/422/485 2 - 1 Gbyte AD CR3/PMC-zz 64-bit PMC Carrier Board for 2 PMC modules 3- 5-row I/O, P2 as x=2; P0= PMC2 64-bit, 1xGigE, see ++ AD CR2/PMC-zz 32-bit PMC Carrier board for 2 PMC modules 4- 5-row I/O, P2 as x=2; P0= PMC2 32-bit, 2xGigE, USB, 1xSATA see ++ CB 26D/124-00 VGA, Keyboard, Mouse, RS232 connector cable DS MSS/001-zz Board with HDD, CD-RW/DVD, CompactFlash ++ when x=3 or 4 then Keyboard, Mouse, VGA available For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1453/0704 Specification subject to change; E and OE. © Concurrent Technologies 2004 Option Optional Optional PMC Module 64-bit PMC expansion PMC Module 32-bit PCI Bus

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the VP315 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

ACT Technico CPCI-6020 Emerson CompactPCI Host Slot Processor Board

product

Concurrent Technologies VP347 Single Board Computer. 6U VME Intel Pentium M

product

6U VME Intel Core Duo Single Board Computer

product

6U VME and VXS Intel Core 2 Duo Single Board Computer

product

6U VME or VXS Dual-Core Intel Xeon Dual Single Board Computer

product

6U VME and VXS Intel Core 2 Duo Single Board Computer