Elite.Parts chervon right Manufacturers chervon right A chervon right ACT/TECHNICO chervon right VP307
About product Specifications Features Datasheet FAQ

ACT/TECHNICO VP307

Image of ACT/TECHNICO VP307

Description

Act Technico VP307 Concurrent Technologies 1.8 GHz Intel Pentium M 745 based Single-Slot VME board VITA 31.1

Part Number

VP307

Price

Request Quote

Manufacturer

ACT/TECHNICO

Lead Time

Request Quote

Category

SINGLE BOARD COMPUTER »  SBC VMEBUS (INTEL)

Specifications

CPU

1.8 GHz Intel Pentium M processor 745: uses uFC-PGA 478 (Micro Flip-Chip pin grid array) package 400 MHz Front Side Bus 64 Kbytes of primary (L1) on-die cache 2 Mbytes of secondary (L2) on-die cache no CPU fan; low power processor 1.6 GHz and 1.1 GHz processor versions available utilizes 64-bit ServerWorks GC-LE chipset ITP debug port

Dimensions

supported up to 1.5 Gbytes of DDR ECC SDRAM: 512 Mbytes soldered on board DRAM up to 1 Gbyte provided via a SODIMM socket error correction up to 4 bits accessible from Intel Pentium M processor 745 or VME bus

Environment

0C to +55C (operating) 10% to 90% Relative Humidity (operating non-condensing) -40C to +70C (storage) 10% to 90% Relative Humidity (storage non-condensing

Ethernet

2x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T: implemented by x2 Intel 82540EM controllers supports via P0 or P2 configuration options support for VITA 31.1 Gigabit ethernet on VME64x backplane 1x channel supporting 10 Base-T and 100 Base-TX: implemented by Intel 82551QM controller via front panel RJ45

Expansion Interface

+5V@7.8A (typical with 1.8 GHz with 512 Mbytes DRAM) +12V@0A; -12V@0A +12V and -12V routed to PMC expansion slot

FDD

Phoenix ServerBIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included

Form Factor

512 Kbytes of BIOS flash EPROM- 8-bits wide 32 Mbytes of Application Flash

Gross Weight

implemented by a Silicon Motion SM722 providing: 8 Mbytes video memory resolutions up to 1280x1024 supporting up to 16M colors analog VGA accessed via a 15-way high-density connector on front panel or via P2 connector

IDE Interface

EIDE interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via P2 connector connects to an optional hard/floppy/flash/CD-ROM drive board secondary channel can be used for on-board 2.5 inch disk drive or CompactFlash module or MicroDrive type II drive

Memory

6U form factor: 9.2 inches x 6.3inches (233mm x 160mm) single-slot: 0.8inches (20.3mm) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak diplacement (non-operating) utilizes a 160-way DIN connector for P1 and P2: compatible with normal 96-way DIN connectors optional P0 (for VME64x backplanes only)

OS

keyboard and mouse interfaces via a single PS/2 type connector on front panel and via P2 connector floppy disk interface via P2 connector 2x USB (Universal Serial Bus) interfaces: 1x USB interface accessed via a USB connector on front panel 1x USB interface via P2 connector 3x General purpose I/O bits via P2 connector speaker interface via P2 connector PC-compatible Real Time Clock (Year 2000 compliant) watchdog timer 1x32-bit Long Duration Timer with processor interrupt capability

Power Connector

1x PMC slot with I/O via front panel and optionally P0: supports a 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V PCI signaling expansion connector to a PMC carrier board, giving two extra PMC sites

SATA

PCB (PWB) manufactured with flammability rating of 94V-0

Serial

2x asynchronous RS232/422/485 serial channels: 1x channel accessed via a RJ45 connector on the front panel 1x channel via P2 connector 16550 compatible UART's both channels can be user configured for RS232, RS422, or RS485

Socket

support for Linux, VxWorks, Windows NT, Windows 2000, Windows XP Embedded, Windows XP, RTX, QNX, Solaris and MS-DOS

Video Interface

implemented using Tundra Universe II device VME master/slave A32/A24/A16/D64/D32/D16/D8 (E0)/MBLT64 fast hardware byte swapping auto system controller detect full interrupter/interrupt handler support bus error interrupt hardware

Features

Datasheet

pdf file

vp30701-1412807787x.pdf

136 KiB

Extracted Text

Intel® Pentium® M Processor 745 Single Board Computer APPLICATIONS The VP 307/01x is a PC-compatible high performance cluded (VITA 31.1). The VP 307/01x is suitable for a VME single board computer supporting the 1.8 GHz range of demanding applications within the industrial Intel® Pentium® M processor 745, with extensive front control, defense, telecomms, telemetry, scientific and and rear I/O functions. The board features up to 1.5 aerospace markets. Its functionality can be further in- Gbytes DDR synchronous DRAM and a variety of inter- creased through the use of PMC modules. To simplify faces including an option for an on-board Hard Disk the board’s integration many popular industry stan- Drive, CompactFlash™ or Hitachi GST MicroDrive™. Sup- dard operating systems are supported. The board is port for Gigabit Ethernet on VME64x backplanes is in- plug compatible with the VP 305/01x family. HIGHLIGHTS � 1.8 GHz Intel Pentium M processor 745: � Floppy disk interface - 64 Kbytes L1 cache � Front panel and P2 I/O combinations available: - 2 Mbytes L2 cache - analog and digital graphics interfaces - improved P4 architecture - keyboard and mouse interfaces - no CPU fan needed; low power processor - 2 x RS232/RS422/RS485 serial channels � 1.6 GHz and 1.1 GHz processor versions available; - 2 x Universal Serial Bus (USB) ports see VP 305/01x datasheet � 64-bit PMC module interface, operating up to 66 MHz � Up to 1.5 Gbytes of DDR DRAM (with ECC) - Expansion connector for dual site PMC carrier board � Watchdog timer and Long Duration Timer � High performance EIDE interfaces with optional on-board disk drive (in a single slot) � VME64 Interface supporting A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with � Supports optional CompactFlash or MicroDrive support for fast hardware byte-swapping � 1 x 10/100Mbps Ethernet interface (front panel) � Single slot � 2 x 10/100/1000Mbps Ethernet interfaces: � Support for Linux®, Windows NT®, Windows® 2000, - P2 I/O or Ethernet on VME64x backplanes (VITA 31.1) Windows® XP, Windows XP Embedded, RTX®, VxWorks® , � 32 Mbytes Application flash EPROM QNX®, Solaris™ and MS-DOS® � 512 Kbytes of BIOS Flash EPROM 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 32-bit PCI Bus 64-bit PCI Bus Central Processor Analog 1 x RS232/ 1 x Universal Graphics 1 x Ethernet PMC � 1.8 GHz Intel® Pentium® M processor 745:- Interface 10/100Mbps Interface RS422/RS485 Serial Bus � uses �FC-PGA 478 (micro Flip-Chip Pin Grid Array) package Keyboard Mouse Serial Intel Interface Interface 2xUSB SM722 Interface 82551QM � 400 MHz Front Side Bus P2 P2 P2 P2 � 64 Kbytes of primary (L1) on-die cache Bridge � 2 Mbytes of secondary (L2) on-die cache 3V BIOS � no CPU fan; low power processor Flash EPROM Real-Time Pentium M ServerWorks � 1.6 GHz and 1.1 GHz processor versions Clock Processor GC-LE available; see VP 305/01x datasheet PCI Application � utilizes 64-bit ServerWorks’ GC-LE chipset Flash Expansion DDR CF SDRAM � ITP debug port or Universe II DRAM Floppy EIDE Serial Front/Rear Panel 2 x Intel Disk P2 � supporting up to 1.5 Gbytes of DDR ECC Interface Interface Interface Link 82540EM Interface Byte SDRAM:- Swap � 512 Mbytes soldered on-board DRAM � up to 1 Gbyte provided via a SODIMM EIDE 1xUSB Mouse VME socket 1 x RS232/ DFP PCI PMC P0 2x RS422/RS485 Keyboard Analog Carrier Ethernet (PSB) Graphics � error correction up to 4-bits 10/100/1000Mbps P2 or P0 (VITA 31.1) P2 � accessible from Intel Pentium M processor 745 or VME bus � fast hardware byte swapping Serial Interface Hard Disk Interfaces � auto system controller detect � 2 x asynchronous RS232/RS422/RS485 serial � EIDE interface:- � full interrupter / interrupt handler support channels:- � supports up to Ultra-DMA 100 for high � bus error interrupt hardware performance drives � 1 x channel accessed via a RJ45 connector on the front panel � two channels (primary and secondary) Electrical Specification � 1 x channel via P2 connector � primary channel is accessible via P2 � +5V@7.8A (typical at 1.8 GHz with 512 � 16550 compatible UARTs connector Mbytes DRAM) � connects to an optional � both channels can be user configured for � +12V@0A; -12V@0A hard/floppy/flash/CD-ROM drive board RS232, RS422 or RS485 � +12V and -12V routed to PMC expansion � secondary channel can be used for slot Other Peripheral Interfaces on-board 2.5 inch disk drive or � keyboard and mouse interfaces via a single Safety CompactFlash module or MicroDrive Type PS/2™ type connector on front panel and via II drive � PCB (PWB) manufactured with P2 connector (see Note 2) flammability rating of 94V-0 Ethernet Interfaces � floppy disk interface via P2 connector � 2 x channels supporting 10Base-T and Environmental Specification � 2 x USB (Universal Serial Bus) interfaces:- 100Base-Tx, 1000Base-T:- � 0°C to +55°C (operating) � 1 x USB interface accessed via a USB � implemented by 2 x Intel® 82540EM � 10% to 90% Relative Humidity (operating, connector on front panel Controllers non-condensing) � 1 x USB interface via P2 connector � support via P0 or P2 configuration � -40°C to +70°C (storage) (see Note 2) options (see Note 2) � 10% to 90% Relative Humidity (storage, � 3 x General Purpose I/O bits via P2 connector � support for VITA 31.1 Gigabit Ethernet on (see Note 2) non-condensing) VME64x backplane � speaker interface via P2 connector Mechanical Specification � 1 x channel supporting 10Base-T and (See Note 2) � 6U form-factor 9.2 inches x 6.3 inches 100Base-Tx:- � PC-compatible Real Time Clock (Year 2000 (233mm x 160mm) � implemented by Intel® 82551QM compliant) � single slot: 0.8 inches (20.3mm) Controller via front panel RJ45 � watchdog timer � shock: � 1 x 32-bit Long Duration Timer with processor Graphics Interface 20g, 11ms, ½ sine (operating); interrupt capability � implemented by a Silicon Motion SM722 30g, 11ms, ½ sine (non-operating) providing:- � vibration: Firmware Support � 8 Mbytes video memory 5Hz-2000Hz at 2g, 0.38mm peak � Phoenix® ServerBIOS™ � resolutions up to 1280 x 1024 displacement (operating); � comprehensive Power-On Self-Test (POST) 5Hz-2000Hz at 5g, 0.76mm peak � supporting up to 16M colors � LAN boot firmware included displacement (non-operating) � analog VGA accessed via a 15-way high � utilizes a 160-way DIN connector for P1 density connector on front panel or via P2 Software Support and P2:- connector (see Note 2) � Support for Linux, VxWorks, Windows NT, � compatible with normal 96-way DIN Windows 2000, Windows XP Embedded, � flat panel supported by a Panel Link connectors Windows XP, RTX, QNX, Solaris and MS-DOS interface via P2 connector � optional P0 (for VME64x backplanes only) Flash EPROM PMC Interface � 512 Kbytes of BIOS Flash EPROM - 8-bits wide specific variants are supplied with � 1 x PMC slot with I/O via front panel and optionally P0:- VME64x handles � 32 Mbytes of Application Flash � supports 32/64-bit, 33/66 MHz PCI VME Interface 5-row backplane is required to operation � implemented using Tundra® Universe II™ provide P2 access to dual Ethernet, analog � 3.3V or 5V PCI signaling device VGA, keyboard, mouse, USB, speaker and � expansion connector to a PMC carrier board, � VME Master/Slave GP I/O interfaces giving two extra PMC sites � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 ORDERING INFORMATION VP 307/011-xy 1.8 GHz Pentium M Processor 745 Where x = P2/P0 Breakout combinations Where y = AD CR2/PMC-zz PMC Carrier Board for 2 PMC modules 1 - 5-row, dual Ethernet via P2, no PMC rear I/O 1 - 512 Mbytes AD 200/001-01 CompactFlash/MicroDrive carrier 2 - 5-row, dual Ethernet via P2, PMC rear I/O via P0 2 - Reserve AD CP1/DR1-zz 2.5 inch Hard Disk Drive (HDD) assembly 3 - 5-row, VITA 31.1 via P0, PMC rear I/O via P0 3 - 1 Gbyte DS MSS/IFP-zz Board with HDD, CD, FDD 4 - 3-row, EIDE, floppy disk, DFP, RS232/422/485 via P2 4 - 1.5 Gbytes DS MSS/00x-zz Board with HDD, CD-RW/DVD, CompactFlash, FDD When x = 1, 2 or 3, the board provides VGA, keyboard, mouse, USB, speaker and For z options please contact your local sales office GP I/O interfaces via 5 row P2, in addition to the interfaces shown for x = 4 All companies and product names are trademarks of their respective organizations. Datasheet Code 1462/0704 Specification subject to change; E and OE. © Concurrent Technologies 2004 32-bit PCI Bus PMC Module Optional

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the VP307 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Concurrent Technologies 6U VME CPU Board- Pentium M | VITA 31.1 Compliant