Elite.Parts chervon right Manufacturers chervon right A chervon right ACT/TECHNICO chervon right VP305
About product Specifications Features Datasheet FAQ

ACT/TECHNICO VP305

Image of ACT/TECHNICO VP305

Description

Concurrent Technologies 6U VME CPU Board- Pentium M | VITA 31.1 Compliant

Part Number

VP305

Price

Request Quote

Manufacturer

ACT/TECHNICO

Lead Time

Request Quote

Category

SINGLE BOARD COMPUTER »  SBC VMEBUS (INTEL)

Specifications

CPU

1.6 GHZ or 1.1 GHz Intel Pentium M processor: 1.6 GHz uses uFC-PGA 478 (micro Flip-Chip Pin Grid Array) package 1.1 GHz uses uFC-BGA 479 (micro Flip-Chip Ball Grid Array) package 400 MHz Front Side Bus 64 Kbytes primary (L1) on-die cache 1 Mbytes secondary (L2) on-die cache no CPU fan; low power processor 1.8 GHz version available utilizes 64-bit ServerWorks GC-LE chipset ITP debug port

Dimensions

supporting up to 1.5 Gbytes of DDR ECC SDRAM: 512 Mbytes soldered on board DRAM up to 1 Gbyte provided via a SODIMM socket error correction up to 4 bits accessible from processor or VME bus

Environment

0C to +55C (operating) 10% to 90% Relative Humidity (operating, non-condensing) -40C to +70C (storage) 10% to 90% Relative Humidity (storage, non-condensing)

Ethernet

2x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T: implemented by 2x Intel 82540EM controllers support via P0 or P2 configuration options support for VITA 31.1 Gigabit ethernet on VME64x backplane 1x channel supporting 10 Base-T, 100 Base-TX: implemented by an Intel 82551QM controller via front panel RJ45

Expansion Interface

+5V@8.1A (typical at 1.6 GHz with 512 Mbytes DRAM) +12V@0A; -12V@0A +12V and -12V routed to PMC expansion slot

FDD

Phoenix ServerBIOS comprehensive Power-On Self-Test (POST) LAN boot firmware included

Form Factor

512 Kbytes of BIOS flash EPROM- 8-bits wide 32 Mbytes of Application Flash

Gross Weight

implemented by a Silicon Motion SM722 providing: 8 Mbytes video memory resolutions up to 1280x1024 supporting up to 16M colors analog VGA accessed via a 15-way high-density connector on front panel or via P2 connector flat panel supported by a panel link interface via P2 connector

IDE Interface

EIDE interface: supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary) primary channel is accessible via P2 connector connects to an optional hard/floppy/flash/CD-ROM drive board secondary channel can be used for on-board 2.5inch disk drive or CompactFlash or MicroDrive Type II drive

Memory

6U form-factor: 9.2inches x 6.3inches (233mm x 160mm) single-slot: 0.8 inches (20.3mm) shock: 20g, 11ms, 1/2 sine (operating) 30g, 11ms, 1/2 sine (non-operating) vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating) 5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating) utilizes a 160-way DIN connector for P1 and P2: compatible with 96-way DIN connectors optional P0 (for VME64x backplanes only)

OS

keyboard and mouse interfaces via a single PS/2 type connector on front panel and via P2 connector floppy disk interface via P2 connector 2x USB (Universal Serial Bus) interfaces: 1x USB interface accessed via a USB connector on front panel 3x general purpose I/O bits via P2 connector speaker interface via P2 connector PC-compatible Real Time Clock (Year 2000 compliant) watchdog timer 1x32-bit Long Duration Timer with processor interrupt capability

Power Connector

1x PMC slot supporting: I/O via front panel and optionally P0 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V PCI signaling expansion connector to a PMC carrier board, giving two extra PMC sites

SATA

PCB (PWB) manufactured with flammability rating of 94V-0

Serial

2x asynchronous RS232/422/485 serial channels: 1x channel accessed via a RJ45 connector on the front panel 1x channel via P2 connector 16550 compatible UART's both channels can be configured for RS232, RS422, or RS485

Socket

support for Linux, Windows NT, Windows 2000, Windows XP, Windows XP Embedded, RTX VxWorks, QNX, Solaris and MS-DOS

Video Interface

using the Tundra Universe II device VME master/slave A32/A24/A16/D64/D32/D16/D8(E0)/MBLT64 fast hardware byte mapping auto system controller detect full interrupter/interrupt handler support bus error interrupt hardware

Features

Datasheet

pdf file

vp30501-1497970658x.pdf

130 KiB

Extracted Text

Intel® Pentium® M Processor Single Board Computer APPLICATIONS The VP 305/01x is a PC-compatible high performance cluded (VITA 31.1). The VP 305/01x is suitable for a VME single board computer supporting the 1.6 GHz or range of demanding applications within the industrial 1.1 GHz Intel® Pentium® M processor, with extensive control, defense, telecomms, telemetry, scientific front and rear I/O functions. The board features up to and aerospace markets. Its functionality can be fur- 1.5 Gbytes DDR synchronous DRAM and a variety of in- ther increased through the use of PMC modules. To terfaces including an option for an on-board Hard Disk simplify the board’s integration many popular indus- Drive, CompactFlash™ or Hitachi GST MicroDrive™. Sup- try standard operating systems are supported. The port for Gigabit Ethernet on VME64x backplanes is in- board is plug compatible with the VP 307/01x family. HIGHLIGHTS � 1.6 GHz or 1.1 GHz Intel Pentium M processor: � Front panel and P2 I/O combinations available: - 64 Kbytes L1 cache - analog and digital graphics interfaces - 1 Mbyte L2 cache - keyboard and mouse interfaces - improved P4 architecture - 2 x RS232/RS422/RS485 serial channels - no CPU fan needed; low power processor - 2 x Universal Serial Bus (USB) ports � 1.8 GHz processor version available; � 64-bit PMC module interface, operating up to 66 MHz see VP 307/01x datasheet - Expansion connector for dual site PMC carrier board � Watchdog timer and Long Duration Timer � Up to 1.5 Gbytes of DDR DRAM (with ECC) � VME64 Interface supporting � High performance EIDE interfaces with optional A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and on-board disk drive (in a single slot) with support for fast hardware byte-swapping � Supports optional CompactFlash or MicroDrive � Single slot � 1 x 10/100Mbps Ethernet interface (front panel) � Extended temperature version available: � 2 x 10/100/1000Mbps Ethernet interfaces: see VP 305/011-E datasheet - P2 I/O or Ethernet on VME64x backplanes (VITA 31.1) � Support for Linux®, Windows NT®, Windows® 2000, � 32 Mbytes Application flash EPROM Windows® XP, Windows XP Embedded, RTX®, � 512 Kbytes of BIOS Flash EPROM VxWorks®, QNX®, Solaris™ and MS-DOS® � Floppy disk interface 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA Tel: (734) 971 6309 Fax: (734) 971 6350 32-bit PCI Bus Central Processor Analog 1 x RS232/ 1 x Universal Graphics 1 x Ethernet PMC � 1.6 GHz or 1.1 GHz Intel® Pentium® M Interface 10/100Mbps Interface RS422/RS485 Serial Bus processor:- � 1.6 GHz uses �FC-PGA 478 Keyboard Mouse Serial Intel Interface Interface 2xUSB SM722 Interface 82551QM (micro Flip-Chip Pin Grid Array) package P2 P2 P2 P2 � 1.1 GHz uses �FC-BGA 479 Bridge (micro Flip-Chip Ball Grid Array) package 3V BIOS � 400 MHz Front Side Bus Flash EPROM Real-Time � 64 Kbytes of primary (L1) on-die cache Pentium M ServerWorks Clock Processor GC-LE � 1 Mbyte of secondary (L2) on-die cache PCI � no CPU fan; low power processor Application Flash Expansion DDR CF SDRAM � 1.8 GHz processor version available; or see VP 307/01x datasheet Universe II � utilizes 64-bit ServerWorks’ GC-LE chipset Floppy EIDE Serial Front/Rear Panel 2 x Intel Disk P2 Interface Interface Interface Link 82540EM Interface � ITP debug port Byte Swap DRAM � supporting up to 1.5 Gbytes of DDR ECC EIDE 1xUSB Mouse VME 1 x RS232/ DFP P0 SDRAM:- 2x RS422/RS485 Keyboard Analog PCI PMC Ethernet (PSB) Graphics Carrier � 512 Mbytes soldered on-board DRAM 10/100/1000Mbps P2 or P0 (VITA 31.1) P2 � up to 1 Gbyte provided via a SODIMM socket � error correction up to 4-bits Serial Interface VME Interface � accessible from processor or VME bus � 2 x asynchronous RS232/RS422/RS485 � using the Tundra® Universe II™ device serial channels:- � VME Master/Slave Hard Disk Interfaces � 1 x channel accessed via a RJ45 � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 � EIDE interface:- connector on the front panel � fast hardware byte swapping � supports up to Ultra-DMA 100 for high � 1 x channel via P2 connector performance drives � auto system controller detect � 16550 compatible UARTs � two channels (primary and secondary) � full interrupter / interrupt handler support � both channels can be user configured for � primary channel is accessible via P2 � bus error interrupt hardware RS232, RS422 or RS485 connector Electrical Specification � connects to an optional Other Peripheral Interfaces � +5V@8.1A (typical at 1.6 GHz with hard/floppy/flash/CD-ROM drive board � keyboard and mouse interfaces via a single 512 Mbytes DRAM) � secondary channel can be used for PS/2™ type connector on front panel and � +12V@0A: -12V@0A on-board 2.5 inch disk drive or via P2 connector (see Note 2) � +12V and -12V routed to PMC expansion slot CompactFlash or MicroDrive Type II drive � floppy disk interface via P2 connector � 2 x USB (Universal Serial Bus) interfaces:- Environmental Specification Ethernet Interfaces � 2 x channels supporting 10Base-T and � 1 x USB interface accessed via a USB � 0°C to +55°C (operating); for extended connector on front panel 100Base-Tx, 1000Base-T:- temperature version see VP 305/011-E � 1 x USB interface via P2 connector � implemented by 2 x Intel® 82540EM � 10% to 90% Relative Humidity (operating, (see Note 2) Controllers non-condensing) � support via P0 or P2 configuration � 3 x General Purpose I/O bits via P2 � -40°C to +70°C (storage) options (see Note 2) connector (see Note 2) � 10% to 90% Relative Humidity (storage, � support for VITA 31.1 Gigabit Ethernet on � speaker interface via P2 connector non-condensing) VME64x backplane (See Note 2) Mechanical Specification � 1 x channel supporting 10Base-T and � PC-compatible Real Time Clock (Year 2000 � 6U form-factor 9.2 inches x 6.3 inches 100Base-Tx:- compliant) (233mm x 160mm) � implemented by Intel® 82551QM � watchdog timer � single slot: 0.8 inches (20.3mm) Controller via front panel RJ45 � 1 x 32-bit Long Duration Timer with � shock: processor interrupt capability Graphics Interface 20g, 11ms, ½ sine (operating); 30g, 11ms, ½ sine (non-operating) � implemented by a Silicon Motion SM722 Firmware Support providing:- � vibration: � Phoenix® ServerBIOS™ 5Hz-2000Hz at 2g, 0.38mm peak � 8 Mbytes video memory � comprehensive Power-On Self-Test (POST) displacement (operating); � resolutions up to 1280 x 1024 � LAN boot firmware included 5Hz-2000Hz at 5g, 0.76mm peak � supporting up to 16M colors Software Support displacement (non-operating) � analog VGA accessed via a 15-way high � Support for Linux, Linux, Windows NT, � utilizes a 160-way DIN connector for P1 density connector on front panel or via P2 and P2:- Windows 2000, Windows XP, Windows XP connector (see Note 2) � compatible with 96-way DIN connectors Embedded, RTX, VxWorks, QNX, Solaris and � flat panel supported by a Panel Link MS-DOS � optional P0 (for VME64x backplanes only) interface via P2 connector Flash EPROM PMC Interface specific variants are supplied with � 512 Kbytes of BIOS Flash EPROM - 8-bits VME64x handles � 1 x PMC slot supporting:- wide � I/O via front panel and optionally P0 � 32 Mbytes of Application Flash 5-row backplane is required for P2 � 32/64-bit, 33/66 MHz PCI operation access to dual Ethernet, analog VGA, � 3.3V or 5V PCI signaling Safety keyboard, mouse, USB, speaker and GP I/O � expansion connector to a PMC carrier board, � PCB (PWB) manufactured with flammability giving two extra PMC sites rating of 94V-0 ORDERING INFORMATION Replace the order number suffix (xy) with selections from the following: Where x = P2/P0 Breakout combinations Where y = VP 305/011-xy 1.1 GHz Pentium M Processor 1 - 5-row, dual Ethernet via P2, no PMC rear I/O 1 - 512 Mbytes VP 305/012-xy 1.6 GHz Pentium M Processor 2 - 5-row, dual Ethernet via P2, PMC rear I/O via P0 2 - Reserved 3 - 5-row, VITA 31.1 via P0, PMC rear I/O via P0 3 - 1 Gbyte AD CR2/PMC-zz PMC Carrier Board for 2 PMC modules 4 - 3-row, EIDE, floppy disk, DFP, RS232/422/485 via P2 4 - 1.5 Gbytes AD 200/001-01 CompactFlash/MicroDrive carrier AD CP1/DR1-zz 2.5 inch Hard Disk Drive (HDD) assembly When x = 1, 2 or 3, the board provides VGA, keyboard, mouse, USB, speaker and DS MSS/IFP-zz Board with HDD, CD, FDD GP I/O interfaces via 5 row P2, in addition to the interfaces shown for x = 4 DS MSS/00x-zz Board with HDD, CD-RW/DVD, CompactFlash, FDD For z options please contact your local sales office For extended temperature version see VP 305/011-E All companies and product names are trademarks of their respective organizations. Datasheet Code 1450/0704 Specification subject to change; E and OE. © Concurrent Technologies 2004 32-bit PCI Bus 64-bit PCI Bus PMC Module Optional

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the VP305 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Act Technico VP307 Concurrent Technologies 1.8 GHz Intel Pentium M 745 based Single-Slot VME board V...