Wide SCSI and LVDS VME Disk Modules High Performance, High Capacity Mass Storage These field replaceable modules are perfect for systems requiring self-contained mass storage. Features: ! Enhanced Shock specifications (see specifications on back) ! Electrical bypass of BUSGRANT and IACK signals through integrated backplane ! Selection of DAT and AIT drives from 40 GB to 260 GB (* 3-slots required) ! Large selection of Ultra 160 and Ultra 320 SCSI hard drives from 36 GB to 147 GB ! Supports majority of VMEbus Single Board Computers ! Two or three VME slots (6U x 8HP or 12HP x 160mm) required (DAT, AIT and full size hard drives require 3 slots) ! Choice of two 3.5" Ultra SCSI disks or one hard disk and one DAT/AIT drive Products for Embedded Computing Design & Embedded Storage Documentation Software Chassis I/O CPUs (800) 445-6194 ◆◆◆◆◆ www.acttechnico.com One Ivybrook Blvd., Suite 180, Ivyland, PA 18974 • Tel. (215) 957-9071 • Fax (215) 957-9074 sales@acttechnico.com Specifications DAT & AIT Tape Drive Parameters General Three configurations are available: one or two 3.5" LVDS Wide All tape drives are Ultra SCSI LVDS. SCSI hard drives; one hard and one floppy drive; or one DAT 4 mm DAT 8 mm AIT-2 8 mm AIT-3 tape and one hard drive mounted in the module. The module is 40 GB 50 GB 100 GB equipped with a front panel with 2 activity LEDs, and ejector Tape Capacity std/compressed 40 0/80 50 0/13 100/26 handles for easy removal. The DIN connectors are selectively loaded to minimize insertion force. Transfer Rate - Native (MB/sec) 5.5MB/sec 6MB/sec 12MB/sec 2.75MB/sec 15.6MB/sec 31.2MB/sec Compressed Physical Buffer Memory (MB) 10 0 18 1 The system disk module is 6U (1U=1.75") high by 8HP or 12HP (1HP=0.20") wide by 160mm deep, which is compatible with MTBF (hours) 30 00,000 30 00,00 300,00 VMEbus mechanical and electrical specifications Rev. C.1. Environmental Weight: 3 pounds max. Temperature Performance Operating: +5°C to +45°C Non-Operating: -25°C to +60°C Typical Hard Drive Internal Transfer Rate: 32 - 72 Mbits/sec Humidity Typical Floppy Drive Transfer Rate: 2MB = 500 Kbits/sec Operating: 20% to 80% RH Wet bulb 26°C Typical SCSI Transfer Rate: 5 MB/sec Async, 10MB/sec sync Storage: 10% to 90% RH Wet bulb 45°C Input/Output Shock Operating: 3 G peak acceleration 10 msec SCSI I/O is routed through the A and C rows of the P2 connec- Non-Operating: 50 G peak acceleration 10 msec tor or an optional front panel mounted SCSI-2 connector. An I/ Vibration O interconnect ribbon cable (18") is provided. Operating: 0.5 G peak accel.(5 Hz to 100 Hz) 0.25 G peak accel.(100 Hz to 500 Hz) Compatibility Non-Operating: 2 G peak accel.(5 Hz to 50Hz) ® These Disk Modules are directly compatible with Motorola and Altitude ® Force CPUs. Contact factory for details on adapter modules Operating: -200ft to 10,000 feet for other CPUs. Non-Operating: -200ft to 50,000 feet Reliability We offer a wide variety of configurations, and Hard Drive: 800,000 hours MTBF typical DAT Tape Drive: 200,000 hours MTBF typical drive capacities are always changing. Call 800-445- Floppy Drive: 50,000 hours MTBF typical 6194 or visit our website for the most recent information. Power Requirements Worst Case Input Power www.acttechnico.com (DAT/ Hard Drive): +5V ± 5% @ 1.6A max +12V ± 5% @ 2.3A max Hard Drive Parameters Order Information Each Disk Module is shipped fully assembled and tested. It may Media (in GB) 36 GB 73 GB 147 GB contain one or two drives. Use the following part numbers to RotationalSpeed (rpm) 15 0,025 15 0,02 10,02 design your Hard/Floppy or Hard/DAT Tape Disk Module: Capacity (formatted) 30 6,900 70 3,90 147,80 Average Seek (msec) 49 .9 49 . 4. Hard/Floppy Disk Module: Max.Seek (msec) 54 .4 54 . 5. TDM2-2F1-xGH2-SC-O Avg.Latency (msec) 29 .99 29 .9 2.9 InternalData Transfer Rate (MB/s) 74 4 78 45 Options Hard Drive 2 = Front Panel for SCSI I/O Specify size from chart A = AV-ready Hard Disk Disk Module with 1 or 2 Hard Drives: TDM2-xGH1-xGH2-S-O Specify Hard Drives and options using above choices. One Ivybrook Blvd., Suite 180 Ivyland, PA 18974 Hard/DAT or AIT Tape Disk Module: TEL: (800) 445-6194 (215) 957-9071 TDM3-xGDT1-xGH2-S FAX: (215) 957-9074 E-MAIL: sales@acttechnico.com DAT or AIT Tape Drive Hard Drive Specify capacity Specify size A division of Advanced Control Technology, Inc. from chart from chart All trademarks are registered to their respective companies. Printed in U.S.A.-DM-PDF-0803