ACT/TECHNICO MPC750FX

Embedded Computing for ™ Business-Critical Continuity PmPPC750f PMC Modules PowerPC™-based Emerson’s PmPPC750f is a complete processor subsystem in a very compact, indus- ProcessorPMC try standard form factor. It is designed to allow communication equipment manu- facturers to add modular and upgradeable compute functionality to their I/O base- board and provide the localized horsepower necessary for applications such as pro- ■ tocol processing, packet processing, data filtering or I/O management. PowerPC 750FX processor running at 733MHz+ Using an off-the-shelf processor subsystem saves you time-to-market by allowing ■ 128MB, 256MB, 512MB you to focus your engineering efforts on the key value-add portions of the system or 1GB ECC SDRAM in without spending time and effort on the processor design and testing. A modular SODIMM package processor subsystem also lowers your lifetime cost of ownership by providing an ■ 32/64-bit 33/66 MHz PCI easy upgrade path, and protecting you from obsolescence issues. with DMA ■ Considerable engineering effort has gone into ensuring maximum flexibility on the Three 10/100 Ethernet PmPPC750f. The module can be used in both Processor PMC Monarch and Non- interfaces Monarch modes, which means that it can act as the host (Monarch) of the local PCI ■ Processor PMC Monarch bus or be a peripheral (Non-Monarch) on the local PCI bus depending on the appli- and Non-Monarch modes cation or baseboard. We’ve also implemented the SDRAM memory using SODIMM ■ Two serial I/O ports packaging, the same memory package used dominantly in laptop computers. 2 ■ I C interface ■ RoHS/WEEE compliant configuration available ■ Quality assured by over 30 years of design experience and a TL-9000 and ISO 9001:2000 certified quality management system. (FM 26789) ISO 9001:2000 FM 26789 Embedded Computing for PmPPC750f ™ Business-Critical Continuity PMC Modules Serial Ports DEVELOPMENT PROCESSOR ACCESSORIES COMPLIANCE MEZZANINE CARD (DMC) ■ Two RS-232 asynchronous serial ports ■ ■ ■ PowerPC™ 750FX running Optional plug-on card (side Development Mezzanine IEEE 1356.4 ■ Both ports available with 2) to speed development Card (DMC) at 733+ MHz ■ VITA 32 access via P14 connector ■ ▲ ■ 32-bit address bus, 64-bit Dual 10/100BaseTX Serial Cable ■ PCI 2.2 ■ One of the ports available Ethernet ports via 2 RJ45 data bus ■ User Manual via bezel or one of the connectors ■ L1 Cache REGULATORY ports available during ▲ RS-232 debug serial ▲ 32K, 32-byte line, 8-way development via optional PHYSICAL CHARACTERISTICS port with cable to DB-9 ■ set associative instruction UL/CSA 60950 Development Mezzanine connector and data cache ■ IEC 950 Card (DMC) ■ PMC Formfactor: ▲ Processor COP header for ▲ Singe-cycle cache access 2 ■ 149mm x 74mm Canada ICES-003 I C software development ■ 512K on-chip core speed ■ ■ ■ Power supply: 3.3Vdc EN55022 FCC Part 15 2-wire independent bus ▲ JTAG header for PCI L2 Cache with ECC ■ ■ ■ Power dissipation: NEBS Bellcore GR1089 Master or slave mode bridge and on-card logic ■ Floating-Point Unit (FPU) 9W typical ■ ■ ▲ NEBS Bellcore GR63 Access via P14 connector Four software-readable ■ Operating range: 0°–55° C, for end-user applications configuration jumpers ■ EN 300386 MEMORY 5–95% relative humidity ▲ General Purpose Timers 32-pin PLCC socket for (non-condensing) software development ■ Eight 32-bit counter/timers SDRAM ■ Single connector to attach ■ 32-bit watchdog timer ■ 128MB, 256MB, 512MB or to PMC module 1GB SDRAM configurations Real-Time Clock Serial I/O Reset with Error Checking and 2 ■ I C Front Mini- Mini- Correction (ECC) SOFTWARE SUPPORT Switch Switch Pa USB USB nel DMA ■ Modular and upgradable ■ ■ 8-Channel DMA support Monitor with power-on SODIMM packaging self test ■ High-speed data move- ■ 133MHz operation (100MHz Development Mezzanine Card (DMC) ment between any module ■ Board support package for 1GB configuration) 100BaseTX ROM Socket resources without signifi- for VxWorks Prog. Header Flash 100BaseTX cant CPU intervention ■ Board support package COP Header Jumpers ■ 16, 32 or 64 MByte Flash PCI for Linux configurations ■ ■ 33/66MHz operation via Board support package 3.3V ■ Organized as 2 banks – for 2.5V Power Marvell Discovery system for QNX * 100BaseTX 1.8V Monitor protected field updateable 1.2V 512KB L2 Cache controller 60x Bus image PCI PowerPC™ ■ 32/64-bit data path 2 I C ■ Flash Architecture NOR PPC750FX ■ Monarch and Non- Monarch mode support Flash LEDs up to 64MB (local host or peripheral) I/O NVRAM ■ PCI 2.2 compliant Ethernet GT-64260 LEDs and Switches PHY Support Memory Controller/ Logic ■ Three 10/100Base Fast ■ PCI Bridge with 4 development user-pro- SDRAM w/ECC SDRAM w/ECC Integrated up to 1GB up to 1GB Ethernet ports with access grammable surface mount SODIMM SODIMM Peripherals RS-232 via P14 connector LEDs on PMC module 2 E PROM ■ Two of the 10/100BaseTX ■ 4 development user-pro- RTC Ethernet ports available grammable surface mount GT GT-64260 -64260 Config ROM Config ROM during development via LEDs on optional optional Development Development Mezzanine P11 P13 Mezzanine Card (DMC) Card (DMC) Serial I/O* ■ Recessed front panel reset based P12 P14 * Ethernet and Serial I/O configuration options: - I/O via front panel - I/O via P14 connector AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling ™ DC Power Systems Outside Plant Site Monitoring Business-Critical Continuity . Embedded Computing Power Switching & Controls Surge & Signal Protection Emerson Network Power, Embedded Computing Business-Critical Continuity, Emerson Network Power and the ■ 8310 Excelsior Drive Madison, WI 53717-1935 USA Emerson Network Power logo are trademarks and ■ ■ service marks of Emerson Electric Co. US Toll Free: 1-800-356-9602 Voice: +1-608-831-5500 FAX: +1-608-831-4249 ©2006 Emerson Electric Co. Email: info@artesyncp.com 7/06 www.artesyncp.com