IC-PQ2-PMCc Embedded PowerPC module with 3 Fast Ethernet Controllers IC-PQ2-PMCc PMC module is designed in accordance with IEEE1386 standard. It features a high performance 32 bits PowerPC processor with three Fast Ethernet controllers. A local co-processor takes in charge all communication functionalities unloa-ding thus the PowerPC processor. IC-PQ2-PMCc can be used in conjunction with Compact- PCI, VME carriers or proprietary design. Many networks or embedded applications can be developed on-board : • Processor module with a need of high level of inte- gration and low power consumption. • Low cost embedded application. • Communication controller with Multi-Ethernet Links. • Time stamping on the data ţ ow, TrafŢ c shaping, ... • Ethernet channels with redundancy. Description Main features IC-PQ2-PMCc is powered by a MPC8270, being part of Processor core the PowerQUICCII processor family. This embedded proc- ► PPC603e with FPU 32 bits RISC architecture with : essor couples a 603e core with a RISC communication 400/450 MHz processor and three Fast Ethernet controllers. This low • 16KB Instruction Cache and 16KB Data Cache. power design, less than 4W with three Ethernet ports, • 24KB on-board fast dual-port SRAM. makes system integration easier. • MMU and FPU capabilities. • DMA-channel controllers. IC-PQ2-PMCc CPU board implements a 64bits PowerPC ► Up to 256MB of shared SDRAM. local bus. This local bus is usable by the host via the 32 ► 128KB SRAM bit-PCI bus through a PowerPC-to-PCI bridge. ► 8, or 32 MB of Nor Flash EPROM. ► 32KB SPI EEPROM IC-PQ2-PMCc can be used in Monarch, Non-Monarch ► Time of day Calendar clock. or in stand-alone mode. According to the application, the ► Real Time clock and four 32 bit-timers. PMC processor module can be host or simple station. ► PCI interface Initiator, Target & Host: • 32 bits @ 33/66 MHz IC-PQ2-PMCc provides three full-duplex 802.3 and Fast • 3.3V only PCI signaling Rev 2.2 Ethernet controllers associated to three PHY 10/100TX interfaces. Each controller implements a local FIFO and I/O subsystem DMA channel and supports the promiscuous mode. ► Up to three Ethernet 10/100TX auto-sensing ports are routed to the front panel RJ45 or Pn4 connector. IC-PQ2-PMCc is specially designed for industrial environ- ► One asynchronous RS232 port routed on a front mini- ment as it is available in extended and rugged versions USB connector. with coating. A temperature sensor monitors the opera- ► On the rear I/O Pn4 and reverse Pn3 connectors : tional constraints. Surge protections implemented on each • 4*Multi-purpose serial controller SCC[1..4]. Ethernet lines make this board particularly Ţ tted to harsh • 4 TDM with 128 HDLC channels. conditions. • I²C bus (400Kbs), SPI and one RS232 serial port. ► On the reverse Pn3, several general logical I/O. IC-PQ2-PMCc provides four multi-purpose serial control- ► On the debug connector : JTAG/COP and SMC1. lers (each with a data rate up to 10Mbits) on the Pn4 rear I/O or the reverse optional Pn3 connector. SPI and I²C bus Options are also available on these connectors. In addition Pn3 ► Up to 1GB soldered Flash Disk. provides several GPIO. ► Reverse Pn3 to mezzanine board connection. IC-PQ2-PMCc is fully backward compatible with the IC- PQ2-PMCa. A speciŢ c engineering kit is available. It makes easier the use of the debug tools : JTAG/COP/Async RS232 port and external reset. www.interfaceconcept.com IC-PQ2-PMCc Embedded PowerPC module with 3 Fast Ethernet Controllers On-board Ţ rmware Interface features IC’s on-board Ţ rmware is a comprehensive set of software stored in ţ ash PowerPC embedded core memory including: ►630 MIPS and 11.5SPEC95 @ 450MHz. ►FPU, MMU, 16KB IC & 16KB ID. IC_Boot ►64 KB internal SRAM. This module is called by the reset vector when the board is powered up. It initializes the PowerQUICCII, the memory controller, performs the Power SDRAM on self tests, the module IC_Bios, before using the PCI bridge and jumping ►64,128 or 256 MB 64-bits wide. in different applications according to the values stored in memory. ►Power management with self-refresh. ►Fast access 10ns (6.1.1.1). IC_Bios This module allows the user to access the speciŢ c IC-PQ2-PMCc hardware Flash or EEprom resources via an easy-to-use API. A set of about 60 libraries functions are ►Up to 128MB Mirror-NOR Flash. provided. ►32KB of EEPROM on the SPI bus. ►Optional Nand Flash up to 1GB. IC_Tools It is a Ţ rmware monitor which allows loading Ţ les from Ethernet via Bootp, SRAM running Ţ les in RAM or ţ ashing them. In addition it permits to display or ►128 KB modify the RAM data. To end with, it enables the user to perform mainte- nance tests. DMA controller ►4 virtual independent channels. IC-BSP or IC-LSP ►8, 16, 32 bits peripheral support. These BSPs products are based on the standard distribution of the OS ►Scatter/gather with command/data chaining. editor. They take in charge hardware initialization, interrupt handling and ►Transfers supported include: PCI, memory, internal I/O. generation, hardware clock and timer services, memory management, PCI management, mapping of memory spaces, basic serial for SMC/SCC PCI interface (pseudo-driver for VxWorks®) and MAC driver for Fast Ethernet ports. The ►32-bit, 33/66MHz PCI version 2.2 compatible. advanced CPM functionalities require speciŢ c protocol drivers. ►Signalization 3.3VDC only. ►A poll of read and write buffers. IC-Protocol Modules ►PCI host bridge and peripheral capabilities. These software provide optimized drivers with new functions for serial ►Monarch, Non-Monarch or stand-alone mode. controllers : asynchronous with frame, HDLC/SDLC, Bisync, Transparent ► 4 independent DMA channels. mode, Ethernet, PPP, etc. These communication drivers are designed to ►I²O standard minimize the buffer’s copy. Ethernet Port Interface Concept provides BSP for VxWorks® and Linux® operating sys- ►Compliant with IEEE802.3, 802.3u, 802.3x. tems. Other RTOS (LynxOS,...) can be ported on request. ►10/100Base TX auto-sensing. ►Surge protection. Powerful software debugging tools for application development on IC-PQ2- PMCa board are available for OS supported in-house. Other on-board functions Hosts supported by Interface Concept are Linux® OS and VxWorks. ►RS232 (SMC) Debug port available on a front mini-USB connector. ►Temperature sensor usable via the SPI bus. ►I²C bus, SCC signals and multipurpose I/O on PMC I/O. ►On-board DC/DC generation. Board speciŢ cations ►Calendar clock and supercap for backuped SRAM. Environmental ►4 multi-purposes serial controllers SCC conŢ gurable as : Standard, extended or rugged grade. • asynchronous or synchronous ports. • 10Mbs Ethernet channels. Refer to IC-PQ2-PMCb for conduction-cooled application. ►TDM link at 2Mbs with 128 HDLC channels with TSA capability. Physical dimensions ►These functionalities are provided without phy interface. ►USB 1.1 on SCC4 (no transceiver on board). PMC Module single width, IEEE P1386 compliant (150 mm * 75 mm). Power requirements Accessories ►Engineering kit : 3.3VDC only with less than 3.5 W for maximum conŢ guration. • RS232 serial link based on SMC UART. EM compatibility • JTAG - COP ►RS232 cable (mini-USB toward SUBD9). EMC/EMI : 89/336/ECC, EN55022 ClE, EN50082-2 Environnement SpeciŢ cations: Please refear to information below. Ordering Information: Please consult the IC-PQ2-PMCc datasheet at www.interfaceconcept.com (listing all products reference and envirronment grades availability). This document supersedes any earlier documentation relating to the products referred to herein. The information contained in this document is current at the date of publication. It may subsequently be updated or withdrawn without notice. Corporate Headquarters • 29510 BRIEC DE L’ODET • FRANCE • TEL +33 (0)2 98 573 030 • FAX +33 (0)2 98 573 000 info@interfaceconcept.com COPYRIGHT INTERFACE CONCEPT - 2007 - IC-PQ2-PMCc.v01. All names, products and services mentioned are trademarks or registred trademarks of their respective holders.