® IntelliPack 800 Series Transmitter w/alarm Alarm N.O. COM N.C. SPDT Relay Signal (801T-1500) Conditioning and Isolation Input Output Current Intelligent DC Voltage or I+ Out Transfer Current Ouput JMP Voltage Out Functions V+ R R L L RTN Power DC- 10 - 36V DC DC+ Power ■Description■Performance 801T These transmitters isolate and convert sensor ■General Input Transmitters inputs to noise-free, proportional DC current or Analog to Digital Converter (ADC) voltage output signals. An optional relay output 16-bit Σ−Δ A/D converter. adds a local limit alarm function. Thermocouple, Resolution RTD, Millivolt, and ±0.005% of span or 0.1°C. Each unit offers a selection of input and output Resistance Input ranges, as well as several signal conditioning Ambient Temperature Effect options. This flexibility enables a single IntelliPack Better than ±0.005% of input span per °C or ±1µV, Models whichever is greater. to handle a broad range of applications. As your 801T-0500: Universal temperature transmitter needs change, you can easily reconfigure the Noise Rejection 801T-1500: Transmitter with limit alarm unit for different ranges or functions. Normal Mode: Better than 40dB @ 60Hz. Common Mode: Better than 130dB @ 60Hz. Input Ranges Setup is very easy. IntelliPack modules are quickly Input Response Time (for input step change) TC types: J, K, T, R, S, E, B, N configured with the user-friendly Windows soft- Less than 200mS typical Millivolt: ±15.625mV to ±1.0V DC ware program. Field adjustments are simple with to 98% of final output value. RTD: 100 ohm Pt, 120 ohm Ni, 10 ohm Cu the module’s front-panel push-buttons and status Input Overvoltage Protection Resistance: 0 to 500 ohms LEDs. Once configured, IntelliPacks operate Bipolar Transient Voltage Suppressors (TVS). independent of any host computer. Output Ranges ■Thermocouple Input 0 to 1mA, 0 to 20mA, 4 to 20mA DC ■Special Features Thermocouple Input Ranges 0 to 5V, 0 to 10V DC Thermocouple type user configured. Signal ■High-resolution Sigma-Delta A/D converter linearization, cold-junction compensation, and open delivers high accuracy with low noise. Limit Alarm circuit or lead break detection are included. SPDT electro-mechanical relay (-1500 unit only) TC °C Range (°F Range) Accuracy■Advanced microcontroller provides intelligent J -210 to 760°C (-346 to 1400°F) ±0.5°C signal processing power for linearization, Power Requirement K -200 to 1372°C (-328 to 2502°F) ±0.5°C averaging, and square root computations. T -260 to 400°C (-436 to 752°F) ±0.5°C 10 to 36V DC R -50 to 1768°C (-58 to 3214°F) ±1.0°C ■Windows 95/98/ME/NT/XP/2000 software S -50 to 1768°C (-58 to 3214°F) ±1.0°C Approvals configuration speeds setup and replacement. E -200 to 1000°C (-328 to 1832°F) ±0.5°C CE marked. UL, cUL listed. B 260 to 1820°C (500 to 3308°F) ±1.0°C ■Multi-purpose inputs and outputs reduce N -230 to 1300°C (-382 to 2372°F) ±1.0°C spare stock requirements. Thermocouple Break Detection ■Relay output option provides local TC sensor failure can be configured for either upscale limit alarm capability. or downscale. 4-Wire RTD 4-Wire RTD TC Input 2-Wire RTD 3-Wire RTD (Kelvin) w/Loop Millivolt Resistance Comp. + IN+ IN+ IN+ IN+ IN+ IN+ IN+ IN- IN- IN- IN- IN- IN- IN- EXC+ EXC+ EXC+ EXC+ EXC+ EXC+ EXC+ RTN RTN RTN RTN RTN RTN RTN Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 54 ® IntelliPack + + ® IntelliPack Signal Conditioners ■RTD Input■Output (Relay)■Physical RTD Input Ranges Relay Enclosure 100 ohm Platinum, 120 ohm Nickel, or One SPDT electro-mechanical relay. Case: Self-extinguishing NYLON type 6.6 polyamide ther- 10 ohm Copper; user-configured. moplastic UL94 V-2 NEMA Type 1 enclosure. Relay Ratings (CSA ratings) RTD °C Range (°F Range) Accuracy 25V DC @ 5A. Connectors (Removable Terminal Blocks) 1 Pt -200 to 850°C (-328 to 1562°F) ±0.25°C 120/240V AC @ 5A. Wire Range: AWG #14-22 (AWG #12 stranded only). 2 Pt -200 to 850°C (-328 to 1562°F) ±0.25°C Relay Time Delay Printed Circuit Boards Ni -80 to 320°C (-112 to 608°F) ±0.25°C Adjustable alarm delay of up to 25 seconds. Military grade FR-4 epoxy glass circuit board. Cu -200 to 260°C (-328 to 500°F) ±1.00°C 1 2 Alpha: Pt (α = 1.3850), Pt (α = 1.3911), Contact Material Dimensions Ni (α = 1.6720), Cu (α = 1.4272). Silver-cadmium oxide (AgCdO). 1.05W x 4.68H x 4.35D inches. 26.7W x 118.9H x 110.5D millimeters. 2, 3, or 4-wire configurations supported. Module pro- Expected Mechanical Life vides sensor excitation, linearization, lead-wire com- 20 million operations. Shipping Weight pensation, and sensor break detection. 1 pound (0.45 Kg) packed. ■Environmental RTD Excitation Current 1mA DC typical, all types. Ambient Temperature Operating: -25 to 70°C (-13 to 158°F). ■Ordering RTD Lead-Wire Compensation Storage: -40 to 85°C (-40 to 185°F). 25 ohms per lead. Information Relative Humidity RTD Break Detection IMPORTANT: All IntelliPacks require initial 5 to 95%. RTD sensor failure can be configured for either upscale software configuration (order 800C-SIP). or downscale. Power Requirements See Note 1 below. 10 to 36V DC. 75mA @ 24V. 120mA @ 15V. ■Millivolt Input 801T-0500 Isolation (optical) DC Millivolt/Voltage Input Ranges IntelliPack transmitter (TC/RTD/mV/resistance input). 4-way (input/output/relay/power). ±1.0V ±125mV ±31.25mV 801T-1500 1500V AC for 60 seconds or 250V AC continuous. ±500mV ±62.5mV ±15.625mV Same as above, plus an SPDT relay output. ±250mV Radiated Field Immunity (RFI) 800C-SIP EN61000-4-3, EN50082-1. Millivolt Accuracy Software Interface Package. Better than ±0.05% of input span. Only one kit is required for all IntelliPack models. Electromagnetic Field Immunity (EMI) See diagram on Page 47 for included parts. Less than ±0.25% of output span effect under the ■Resistance Input influence of electromagnetic fields from switching 5034-225 Resistance Input Range solenoids, commutator motors, and drill motors. USB-to-RS232 adapter. See page 91 for more info. 0 to 500 ohms. PS5R-D24 Electrical Fast Transient (EFT) Power supply (24V DC, 2.1A). Resistance Accuracy EN61000-4-4, EN50082-1. See Power Supplies on page 183. ±0.05 ohms. Surge Withstanding Capability (SWC) TBK-B01 EN61000-4-5, EN50082-1. ■Output (DC V/mA) Optional terminal block kit, barrier strip style, 2 pcs. (Does not include terminal block for input wiring.) D/A Converter Electrostatic Discharge (ESD) 16-bit Σ−Δ. EN61000-4-2, EN50082-1. TBK-S01 Optional terminal block kit, spring clamp style, 2 pcs. Radiated Emissions Current Output (Does not include terminal block for input wiring.) EN50081-1 for Class B equipment. Ranges: 0-1mA, 0-20mA, 4-20mA. Compliance: 10V minimum (500 ohm load). Approvals NOTE 1: To order factory configuration, call Acromag Accuracy: 0.025% of span. CE, UL listed (USA, Canada). for a configuration form which must accompany your UL3121 - general product safety. Voltage Output order. Also, append “-C” to model number (example: Ranges: 0-5V, 0-10V. 801T-1500-C). 800C-SIP kit is still recommended. ■Configuration Compliance: 10mA maximum with short circuit pro- tection. 1 ohm output impedance. Software Configuration Accuracy: 0.025% of span. Units are fully programmable via the Windows 95/98/ME/2000/NT/XP IntelliPack Configuration Accuracy (overall input to output) Program. Configuration downloads from PC through 0.075% of span. EIA232 serial port using Acromag 800C-SIP kit. Field Configuration Output, zero/full-scale, relay setpoint and deadband are configurable via push-buttons and a standard calibrator. Optional terminal blocks: barrier strip (left) and LED Indicators spring clamp (right). Cage clamp terminal is standard. LEDs indicate power, status, calibration, and alarm. Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 55 (118.9) 4.68 (95.3) 3.75 (59.4) 2.34 ® IntelliPack 800 Series Dimensions Acromag RUN "T" RAIL DIN MOUNTING ST DIN EN 50022, 35mm 12 RELAY MODE SET C L RST 1 RST 2 SCREWDRIVER SLOT FOR REMOVAL FROM "T" RAIL R 3.90 1.05 (99.1) (26.7) 4.35 (110.5) NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS) Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 90 ® IntelliPack ® IntelliPack Signal Conditioners Accessories Terminal Blocks Mounting Hardware Power Supplies Barrier strip (left) and spring clamp (right). ■Ordering Information See individual I/O modules for compatibility. Barrier Strip Terminal Blocks DIN-Rail Mounting 50W Supply Wire range: For your convenience, Acromag offers several Input Power Requirement AWG #12-26 85 to 264V AC or 105 to 370V DC mounting accessories to simplify your system installation. Our 19” rack-mount kit provides a Output clean solution for mounting your I/O modules 24V DC, 2.1A (50W) and a power supply. Or you can buy precut DIN ■Ordering Information rail strips for mounting on any flat surface. PS5R-D24 6-position: L = 1.47 inches (37.7 mm) Universal 50W power supply ■Ordering Information Wire range: 20RM-16-DIN AWG #12-26 See Power Supplies on page 183 for other models 19" rack-mount kit with DIN rail. and more information. DIN RAIL 3.0 DIN RAIL 16.7 DIN rail strip, Type T, 3 inches (75mm) or USB / RS232 Adapter 16.7 inches (425mm) Length: 3.15 in (8.0 cm) 3-position: L = 0.87 inches (22.3 mm) Height: 0.80 in (2.03 cm) TBK-B01 TBK-B03 Width: 1.75 in (4.44 cm) Terminal block kit, Terminal block kit, Weight: 1.6 oz (45.36 g) two 6-position pieces one 3-position and three 6-position pieces■Ordering TBK-B02 Information Terminal block kit, four 6-position pieces 5034-225 USB-to-RS232 adapter Spring Clamp Terminal Blocks Wire range: AC Current Sensor AWG #12-26 3-position: L = 0.66 inches (16.9 mm) 6-position: L = 1.26 inches (32.3 mm) TBK-S01 TBK-S03■Ordering Information Terminal block kit, Terminal block kit, 5020-350 two 6-position pieces one 3-position and AC current sensor three 6-position pieces TBK-S02 Terminal block kit, four 6-position pieces Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 91