ACCURIDE 9308

MODEL 9308 Lock-In/Lock-Out MODEL 9307 Lock-Out Extra Heavy-Duty, Full Extension APPLICATIONS: Designed for use in heavy-duty mobile and vehicular applications where a lock-in and lock-out are required. This product is Up to 500 lb. [227 kg.] Load Rating covered by U.S. and various foreign patents issued and/or pending. Optional Accessory Platform Brackets ‡ † ‡ † ¥ 9301 Companion 9301 Companion Drawer Member Cabinet Member Finish Clear electroplate (C) only Mounting Side mount Only (Optional Accessory platform brackets available) Length Even lengths: 12"-32" [304.8mm - 812.8mm] Features Non-disconnect. 9308 - Lock-in & lock-out. 9307 - Travel Full extension lock-out only. Bumper provides extra silencing during Height 3.00" [76.2mm] drawer closure. Side Space .75" (+.031, -.000) [19.1mm (+.79, -.00)] Companion 9301 non-locking slide can be used in conjunction Movement Steel ball bearings with locking 9307 or 9308 (see 9301 datasheet) Load Rating Moderate Use - 500 lbs. [227.3 kg.] Hardware Customer supplied (see back page) Frequent Use - 400 lbs. [181.8 kg.] Mobile (Vehicular) - 300 lbs. [136.4 kg.] See 9301 data sheet for further load information. Caution This slide must never be used as a pull-out step, platform or any other application supporting human weight as injury may result. Part Sd lie Sd lie A BCD E F G H J K M N P Q R Number Length Travel 12.00 12.00 6.06 7.06 7.81 8.00 10.25 11.00 9308-12 [304.8] [304.8] [153.9] [179.3] [198.4] [203.2] [260.4] [279.4] 14.00 14.00 8.06 9.06 9.81 10.00 12.25 13.00 9308-14 [355.6] [355.6] [204.7] [230.1] [249.2] [254.0] [311.2] [330.2] 16.00 16.00 10.06 11.06 11.81 12.00 14.25 15.00 9308-16 [406.4] [406.4] [255.5] [280.9] [299.9] [304.8] [361.9] [381.0] 18.00 18.00 5.00 12.06 13.06 13.81 14.00 16.25 17.00 9308-18 [457.2] [457.2] [127.0] [306.3] [331.7] [350.8] [355.6] [412.8] [431.8] 20.00 20.00 5.00 11.69 14.06 15.06 15.81 16.00 18.25 19.00 9308-20 [508.0] [508.0] [127.0] [296.9] [357.1] [382.5] [401.6] [406.4] [463.6] [482.6] 22.00 22.00 5.00 7.50 13.69 16.06 17.06 17.81 18.00 20.25 21.00 9308-22 N/A [558.8] [558.8] [127.0] [190.5] [347.7] [407.9] [433.3] [452.4] [457.2] [514.4] [533.4] 24.00 24.00 5.00 7.50 15.69 18.06 19.06 19.81 20.00 22.25 23.00 9308-24 [609.6] [609.6] [127.0] [190.5] [398.5] [458.7] [484.1] [503.2] [508.0] [565.2] [584.2] 26.00 26.00 5.00 7.50 17.69 20.06 21.06 21.81 22.00 24.25 25.00 9308-26 [660.4] [660.4] [127.0] [190.5] [449.3] [509.5] [534.9] [553.9] [558.8] [615.9] [635.0] 28.00 5.00 7.50 19.69 22.06 23.06 23.81 24.00 26.25 27.00 9308-28 [] 711.2] [711.2 [127.0] [190.5] [500.1] [560.3] [585.7] [604.8] [609.6] [666.8] [685.8] 30.00 5.00 7.50 21.69 24.06 25.06 25.81 9.25 19.75 26.00 28.25 29.00 9308-30 [] 762.0] [762.0 [127.0] [190.5] [550.9] [611.1] [636.5] [655.6] [234.9] [501.6] [660.4] [717.6] [736.6] 32.00 32.00 5.00 7.50 26.06 27.06 27.81 9.25 19.75 28.00 30.25 31.00 9308-32 [812.8] [812.8] [127.0][] 190.5] [601.7 [661.9] [687.3] [706.4] [234.9] [501.6 [711.2] [768.4] [787.4] * Load rating based on 18" slides side mounted in a 32" wide drawer. Mounting Instructions 1. With the slides fully extended, install cabinet member (outer Figure 1 member) with customer supplied 1/4" hex-head or pan head [M6 Euro] screws through the horizontal slots. Be sure slides See are parallel. Tabulated Data 2. Attach drawer to extended inner member with customer supplied 1/4" hex-head or pan head [M6 Euro] screws through 2.13 £ [54.1] the mounting holes/slots. Leave all screws loose for final ¥ adjustment. Adjust slide position until movement is smooth. ¥ 2.00 3. Tighten all screws and if necessary, use more screws to [50.8] ¥ secure slides and complete installation. See Figure 1. Min. ¥ Customer Supplied Mounting Hardware Metal Applications: 1/4" hex-head or pan head [M6 Euro] screw with .260 [6.6mm] holes; -or- hex-head or pan head [M5 Euro] screw with .203 [5.2mm] holes. Wood Applications: 1/4" lag or sheet metal screw -or- #10 lag or sheet metal screw. Maximum screw head of .190 [4.8mm] high by ¥ 1/4"Hex-Head or Pan .500 [12.7mm] diameter for clearance. Head [M6 Euro] Screw £ For Flush Drawer Optional Accessory Platform Brackets Brackets provide four bottom-mount and two side-mount options. Figure 2 Side-Mount For bottom-mount, one bracket attaches to the slide outer member and the cabinet base. The other bracket attaches to the slide inner 9300 Slide member and the platform or tray. For side-mount, the bracket Inner Member attaches to the slide inner member. Bracket Slide mounts to Platform/Shelf See Figure 2 for examples of both mounting options. When the side of cabinet brackets are used either individually or in combination, they will accommodate all slide lengths. Each kit contains two brackets, four 1/4" hex-head screws, and four 1/4" hex nuts with lock washers. Bottom-Mount See separate Accessory Platform Bracket Kit data sheet for more information. 9300 Slide Outer Member Inner Member Bracket mounts Slide Ordering Instructions Bracket Bracket to top or bottom of cabinet Platform/Shelf Locking Slide The locking slide can be used on either the right hand side, left hand side, or both sides of the unit. After the length, specify "L" for left hand locking slide and "R" for right hand locking slide. Complete your slide order for model 9308 or 9307 locking slide by specifying the following: Packaging 4 Each C 9308(07) -22-L Bulk Pack: Slides only. Left and right hand slides packaged in -or- 4 Each C 9308(07) -22-R separate boxes. Total Required Slides Slide Lengths: 12” to 22” 8 each per box Slide Finish 24" to 32" 4 each per box Locking Slide Model 9308 (07) Specifications Slide Length Locking Slide Hand Slide members: Cold rolled steel NOTE: For applications requiring a lock on both sides, order an Ball retainers: Polymer equal amount of "L" and "R" hand slides. Ball bearings: Carburized steel 9301 Non-Locking Companion Slide Note: Specifications, materials, prices, terms, and delivery are Model 9301 is unhanded and can be used on either the left or right subject to change without notice. hand side of the unit. For each locking slide ordered, order 1 companion slide. Complete your slide order for model 9301 companion slide by specifying the following: ACCURIDE INTERNATIONAL INC. 4 Each C 9301 -22 12311 Shoemaker Avenue Total Required Slides Santa Fe Springs, CA 90670 Slide Finish TEL (562) 903-0200 Companion Slide Model 9301 FAX (562) 903-0208 Slide Length www.accuride.com See 9301 data sheet for additional information. Manufacturing, Engineering, and Sales United States • Germany • Japan • Mexico • United Kingdom Copyright © 2003 Accuride International Inc. Printed in U.S.A. 3700-1118(9471)-MK580-R2-1103 Copyright © 2003 Accuride International Inc. Printed in U.S.A. 3700-9471(1118)-MK101-R2-1103