3.3 Vdc • HCMOS/TTL • J-LEADED • PLASTIC MOLDED • SURFACE MOUNT CRYSTAL CLOCK OSCILLATORS ASML 14.0 x 8.95 x 4.7 mm FEATURES: • Industry standard J-Leaded terminals. • Plastic molded SMD, Reflow capable. • Low current consumption. • Tristate Enable/Disable. • HCMOS output. • 3.3Vdc operation. • Extended temperature -40°C to +85°C option. APPLICATIONS: • Provide clock signals for microprocessors and digital circuits. • Communication equipment, AV and OA equipment STANDARD SPECIFICATIONS Frequency Range 3.5 MHz - 25 MHz PARAMETERS SPECIFICATIONS Operation Mode Fundamental, AT Frequency Range (F ) 1MHz - 160MHz o Operating Temperature -10°C to + 60° C (See Options) Operating Temperature (T ) 0°C to +70°C (See Options) OPR Storage Temperature -55°C to + 125° C Storage Temperature (T) - 40°C to +85°C STO @ Frequency Tolerance 25°C ±50 ppm max. (See Options) Frequency Stability (DF F ) ±100ppm max. (See Options) / o Frequency Stability over Temp. ±50 ppm max. (See Options) Supply Voltage (V ) 3.3Vdc ±10% dd Equivalent Series Resistance 200 W for 3.5 MHz < F < 4.0 MHz ) ; 25mA max. (F < 70MHz) Input Current (I ) 10mA max. (F < 20MHz dd (ESR) Maximum 150 W for 4.0 MHz < F < 6.0 MHz 60mA max. (F < 160MHz) 100 W for 6.0 MHz < F < 10.0 MHz Duty Cycle or Symmetry 4 80 0 / 6 W 0% fo rm 1a 0x .MH (Sz e e < O F p t< io n 1 s4 ).0 MHz _ 50 W for 14 MHz < F < 25 MHz Rise and Fall Times (T T ) 6ns max. R / F Shunt Capacitance C0 7 pF max. Output Load 2TTL, 15pF max. Load Capacitance CL 16pF (See Option) Output Voltage (V ) 0.9 *Vdd min. OH Drive Level 100µW max. (V ) 0.4Vdc max. OL @ Aging 25° C First Year ± 5 ppm max. Start-up Time (T ) 10ms max. OSC Insulation Resistance 500 MW min. at 100 Vdc ± 15V “1” or Open: Oscillation > _ 2.2V Tristate Function (VIH ) “0”: (HiZ) < 0.6V (V ) IL Output disabled in high impedance Aging ±5ppm/ Year max. * Pin 1 has internal pull-up resistor which allows Pin 1 to be left floating (enable high) Test circuit, waveform, please see appendix B. Environmental and mechanical specifications, see appendix C. Group 2. Marking, see appendix G. Tape and Reel, see appendix H.(1,000 pcs./reel). A bypass capacitor 0.01 µF is required from Vdd to Gnd. Application notes, see appendix A. Reflow profile, see appendix E. ORDERING OPTIONS AS ML - Frequency - Temperature - Frequency Stability - Duty Cycle - Packaging Dimensions: Inches (mm) XX.XXXXX MHz -R for ± 25ppm max -T -K for ± 30ppm max (Tape & Reel) PIN -D for -10°C to + 60°C FUNCTION -C for ± 50ppm max N0. -E for -20°C to + 70°C 1 Tristate Enable @ 1 -F for -30°C to + 70°C -S for 45 /55% /2Vdd 2 GND / Case -N for -30°C to + 85°C 3 Output -L for -40°C to + 85°C 4 V dd ABRACON NOTE: Left blank if standard • All specifications and markings subject to change without notice ® A AB BR RA AC CO ON N IIS S 29 Journey • Aliso Viejo, CA 92656 • USA IIS SO O 9 90 00 01 1 // Q QS S 9 90 00 00 0 (949) 448-7070 • FAX: (949) 448-8484 C CE ER RT TIIF FIIE ED D 48 E-MAIL: abinfo@abracon.com • INTERNET ADDRESS: www.abracon.com C O R P O R AT I O N