ABRACON Crystal Specification for Micrel Semiconductor MICRF Series RF Transceiver ABRACON P/N for MICRF Chip For use with Micrel Chip P/N ABLS-6.7458MHz-20-R60-D MICRF011-002-007 ABLS-13.560MHz-10-R20-D MICRF102 ABLS-4.897MHz-20-R70-D MICRF011-002-007 ABLS-9.84375MHz-10-R20-D MICRF102 ABLS-9.7941MHz-10-R20 MICRF009-010 ABLS-13.94916MHz-10-R20 MICRF009-010 ABLS-12.1875MHz-10-R20 MICRF112 ABLS-13.0625MHz-10-R20 MICRF112 ABLS-13.6050MHz-20-R50-D MICRF505 ABLS-13.94916MHz-10-R20-D MICRF009-010 ABLS-14.3359MHz-20-R50 MICRF505 ABM9-16.000MHz-10-D-1-U MICRF505-509 ABM3B-12.1875MHz-10-D4 MICRF112 ABM3B-13.0625MHz-10-D4 MICRF112 PROPRIETARY NOTICE ABRACON CORPORATION These documents, and the contained information herein, Headquarters are proprietary and are not to be reproduced, used or 30332 Esperanza, Rancho Santa Margarita disclosed to others for manufacture or for any other California, The USA. purpose, except as specifically authorized, in writing, by Tel : 949-546-8000 ABRACON Corporation. Fax: 949-546-8001 WARNING: ESD SENSITIVE PRODUCT TITLE ABRACON CORPORATION ABRACON Crystal Specification for The Power Of Linking Together Micrel Semiconductor MICRF Series RF Transceiver PREP. DATE ENGR. DATE SCALE DRAWING NO. REV. EP 4/18/2007 HU 4/18/2007 None CKD DATE APP'D DATE PAGE OF ------- - --- --- CP 4/18/2007 1 7 ABRACON CORPORATION Drawing No. : ------- Rev. - Page 2 of 7 The Power Of Linking Together 1.0 SCOPE This specification describes specifications of ABRACON's crystals for Micrel Semiconductor's IC's. 2.0 ELECTRICAL SPECIFICATIONS 2.1 Individual Specifications Frequency Temperature Frequency Load Operating Storage ESR ABRACON P/N (MHz) Cap. (pF) Temp. (˚C) Temp. (˚C) (ohms) Tolerance (ppm) Stability (ppm) ABLS-6.7458MHz-20-R60-D 6.74580 20 -40 to +85 -40 to +85 60 ±50 ±50 ABLS-13.560MHz-10-R20-D 13.56000 10 -40 to +85 -40 to +85 20 ±50 ±50 ABLS-4.897MHz-20-R70-D 4.89700 20 -40 to +85 -40 to +85 70 ±50 ±50 ±50 ±50 ABLS-9.84375MHz-10-R20-D 9.84375 10 -40 to +85 -40 to +85 20 ABLS-9.7941MHz-10-R20 9.79410 10 0 to +70 -40 to +85 20 ±50 ±50 ABLS-13.94916MHz-10-R20 13.94916 10 0 to +70 -40 to +85 20 ±50 ±50 ±50 ±50 ABLS-12.1875MHz-10-R20 12.18750 10 0 to +70 -40 to +85 20 ABLS-13.0625MHz-10-R20 13.06250 10 0 to +70 -40 to +85 20 ±50 ±50 ABLS-13.6050MHz-20-R50-D 13.60500 20 -40 to +85 -40 to +85 50 ±50 ±50 ABLS-13.94916MHz-10-R20-D 13.94916 10 -40 to +85 -40 to +85 20 ±50 ±50 ±50 ±50 ABLS-14.3359MHz-20-R50 14.33590 20 0 to +70 -40 to +85 50 ABM9-16.000Mhz-10-D-1-U 16.00000 10 -40 to +85 -40 to +105 80 ±10 ±10 ABM3B-12.1875MHz-10-D4 12.18750 10 -40 to +85 -40 to +85 70 ±30 ±50 ABM3B-13.0625MHz-10-D4 ±50 13.06250 10 -40 to +85 -40 to +85 70 ±30 2.2 Common Specifications Shunt capacitance C0: 7 pF max. Operation mode: AT-cut Fundamantal Drive level: 1 mW max., 100µW Typical (ABLS) 100 uW max., 10µW Typical (AM9 and Aging @ 25° C per a year : ± 5 ppm max. Insulation resistance: 500 MΩ min. at 100Vdc ± 15V Spurious responses: -3dB max. 3.0 SPECIAL REQUIREMENT This product is RoHS compliant and Pb free. ABRACON CORPORATION Drawing No. : ------- Rev. - Page 3 of 7 The Power Of Linking Together 4.0 MARKING Marking Method : Laser Marking 4.1 ABLS Series Frequency (MHz) ex. 160 for 16.00 MHz A ZYX Traceability Code (Internal) Year : e.g. 7 for 2007 (See table below) Month : A to L (See table below) 4.2 ABM9 Series Frequency (MHz) XXX ex. 080 for 8.00 MHz A ZYX Traceability Code (Internal) Year : e.g. 7 for 2007 (See table below) Month : A to L (See table below) ABRACON's "A" 4.3 ABM3B Series Frequency (MHz) XX.XXX ex. 13.062 for 13.0625 MHz A ZYX Traceability Code (Internal) Year : e.g. 7 for 2007 (See table below) Month : A to L (See table below) ABRACON's "A" 4.2.1 Marking Method : Laser Marking Date Code Month Code January A February B March C April D May E June F July G August H September I October J November K December L ABRACON CORPORATION Drawing No. : ------- Rev. - Page 4 of 7 The Power Of Linking Together 5.0 OUTLINE DIMENSIONS 5.1 ABLS Series 5.2 ABM9 Series 5.3 ABM3B Series Chamfer on PIN 4 (See note) Note: Due to the availability of raw materials, this part may be manufactured with the chamfer on pin 4. Be advised that this does not affect the electrical characteristics of the crystal in any way. Chamfer on PIN 1 (Default) Dimension : mm TOLERANCES: UNLESS OTHERWISE SPECIFIED: .X: ± 0.1 (0.25) .XX: ± 0.01 (0.025) .XXX: ± 0.005 (0.013) ABRACON CORPORATION Drawing No. : ------- Rev. - Page 5 of 7 The Power Of Linking Together 6.0 RELIABILITY TEST No. Test Items Test Conditions The component shall remain within the electrical specification (± 5 pp 1 Temperature Cycling: max) after 3 cycles of high and low temperature testing (-40°C to +85°C) for 2 hours max. The component shall remain within the electrical specification after 2 Thermal Shock: exposure at extreme temperature -40°C to +85°C for 5 minutes for 3 cycles. The component shall remain within the electrical specification after 3 Vibration: loaded vibration at 10Hz to 55Hz, amplitude 1.5mm, within 1 minute for 2 hours minimum on each axis (X,Y,Z). The component shall remain within the electrical specifications after a 4 Drop Test: natural drop (3X) on a hard wooden board at 75 cm. The component shall remain within the electrical specifications after 5 Humidity: being kept at a condition of ambient temperature +85°C, 85% RH for 96 hours minimum. Expose samples to 60PSIG Helium gas for 2 hours. 6 Fine Leak Test: Max leak rate 2X10-8atmcc/s. Submerge samples in 100% De-ionized water or Perfluorocarbon at 7 Gross Leak Test: 85°C for at least 1 minute. Check for bubbles. Solderability of terminals shall be kept at more than 95% after dipped 8 Solderability: in solder flux at 260°C ± 5°C for 5 seconds. The component shall withstand maximum bend of 90°C Lead Bend: 9 reference to base for 2 bends. Solder tinning must be (ABLS only) 4 microns thick minimum. 6.1 REFLOW PROFILE ABRACON CORPORATION Drawing No. : ------- Rev. - Page 6 of 7 The Power Of Linking Together 7.0 PACKING 7.1 ABLS Series T= tape and reel (1,000pcs/reel) 7.2 ABM9 Series T= tape and reel (1,000pcs/reel) 7.3 ABM3B Series T= tape and reel (1,000pcs/reel) Dimension : mm TOLERANCES: UNLESS OTHERWISE SPECIFIED: .X: ± 0.25 .XX: ± 0.025 .XXX: ± 0.013 ABRACON CORPORATION Drawing No. : ------- Rev. - Page 7 of 7 The Power Of Linking Together 8.0 NOTE (1) The parts are manufactured in accordance with this specification. If other conditions and specifications which are required for this specification, please contact ABRACON for more information. (2) ABRACON will supply the parts in accordance with this specification unless we receive a written request to modify prior to an order placement. (3) In no case shall ABRACON be liable for any product failure from in appropriate handling or operation of the item beyond the scope of this specification. (4) When changing your production process, please notify ABRACON immediately. (5) If you intend to use the product for listed application which may possibly cause to loss of life or assets, please notify ABRACON in advance. (For example, Medical, Aerospace, Aeronautic equipment, Safety control equipment as well as safety related.) (6) All specifications and Marking will be subject to change without notice. (7) See ABRACON website (www.abracon.com) for additional Terms and Conditions.