Phase Control PHS Series AC Phase Control Description The PHS Series is an ideal method of changing lamp intensity, varying the speed of a fan/motor, or controlling the temperature of a heater. The effective output voltage is adjusted with an accessory external potentiometer suitable for line voltage applications. Operation Typical Output Waveform Upon application of input voltage, effective output voltage can be varied by changing the external resistance value. As the external resistance increases, the effective output voltage decreases. The inverse is also true. External Adjustment - 230 V AC Rated Potentiometer 120 or 230 V AC Input Voltages Available Up to 20 A Steady State - 200 A Inrush Connection Single Hole Surface Mounting Approvals: Triac Output Device V = Voltage L = Load R = External Adjustment T Dashed lines are internal connections. Accessories Female quick connect P/Ns: P1015-13 (AWG 10/12) P1015-64 (AWG 14/16) P1015-14 (AWG 18/22) Available Models- PHS120A1 •PHS120A10 •PHS120A20 •PHS120A6 PHS230A1 •PHS230A10 •PHS230A20 PHS230A6 Quick connect to Don’t see what you need? Call us for a minimum quantity and price quote! screw adaptor P/N: P1015-18 Ordering Table PHS X X Series Input Rating Versa-knob – 1 A –120A - 120 V AC P/N: P0700-7 – 6 A –230A - 230 V AC –10 A –20 A Example P/N: PHS120A10, PHS230A6 See accessory pages for specifications. 11.10 SSAC, LLC. • 800-377-7722 • customerservice@ssac.com • technicalsupport@ssac.com • www.ssac.com • denotes a preferred product Solid state relays PHS02B01 09.10 PHS02B01 09.10 Solid state relays Phase Control PHS Series AC Phase Control Technical Data Output Type Variable voltage phase angle control Rating Steady State (at 100% On) Inrush* *Units rated ≥ 6A must be bolted to a 1 A 10 A metal surface using the included heat 6 A 60 A sink compound. The maximum mount- 10 A 100 A ing surface temperature is 90°C. Inrush: 20 A 200 A Non-repetitive for 16 ms. Minimum Load Current 100 mA Voltage Drop ≅ 2.0 V at rated current Input Voltage 120 or 230 V AC Tolerance +/-20% Frequency 50 ... 60 Hz Protection Dielectric Breakdown ≥ 2000 V RMS terminals to mounting surface Insulation Resistance ≥100 MΩ Mechanical Mounting * Surface mount with one #10 (M5 x 0.8) screw Termination 0.25 in. (6.35 mm) male quick connect terminals Environmental Operating / Storage Temperature -20°C ... +60°C / -40°C ... +85°C Humidity 95% relative, non-condensing Weight 1A: ≅ 2.4 oz (68 g) 6, 10, & 20A: ≅ 3.9 oz (111 g) External Adjustment Potentiometer 120 V AC 100K Ω rated at 1 W 230 V AC 200K Ω rated at 2 W Must have insulation resistance suitable for line voltage applications Potentiometer Mechanical View Part Number Value (Ohms) Wattage •P1004-174 100K 1 W P1004-175 200K 2 W A durable conductive plastic potentiometer. Inches (Millimeters) Recommended for use with the PHS Series. It is designed to withstand high temperature and harsh environments. The shaft is slotted for screwdriver adjustment and can be panel mounted. Resistance values 100K and 200K +/-10% Rated Wattage at 70°C Linear taper Shaft rotation: 312° +/-3° (effective rotation 275° +/-5°) 11.11 SSAC, LLC. • 800-377-7722 • customerservice@ssac.com • technicalsupport@ssac.com • www.ssac.com • denotes a preferred product