Manufacturers
ZIATECH ZT 5524e
Description
Ziatech ZT 5524e CPU Board - PICMG« 2.16-Compliant High Performance Single Board Computer
Part Number
ZT 5524e
Price
Request Quote
Manufacturer
ZIATECH
Lead Time
Request Quote
Category
PRODUCTS - Z
Specifications
Non-condensing relative humidity
less than 95% at 40º C
Operating temperature
0º C to 45º C
Required airflow
250 linear feet per minute (LFM)
Storage temperature
-40º C to +85º C
Features
- 16MB onboard Flash memory contains field-upgradeable bios and provides space for user programs
- 33/66MHz, 64-bit CompactPCI system bus interface
- Accepts 2.5" low-profile, board mounted EIDE hard drive or optional CompactFlash Type II drive carrier
- Comes standard with memory and hard drive
- Dual 10/100/1000 Mb/s Ethernet interfaces (front panel and backplane)
- Integrated 512KB L2 cache
- Optional ZT 4901eA mezzanine/ bridge card provides dual 64/66 MHz PMC slots, CompactPCI bus-segment bridging at 33 or 66 MHz and dual Fibre Channel interfaces
- ServerWorks LE chipset
- Single 10/100 Mb/s Ethernet interface (front panel only)
- Single or dual 1GHz Intel Pentium III processors support symmetric multiprocessing in single CompactPCI slot
- Support up to 4GB, PC133 SDRAM memory
Datasheet
Extracted Text
TM IPnexus ZT 5524e Single Board Computer Highlights >> Single or Dual 1GHz Intel® Pentium® III Processors Support Symmetric Multiprocessing in a Single This high-performance, standards-based building block is designed for carrier-grade telecom and CompactPCI® Slot Internet applications requiring exceptional processing power and high availability. The dual- processor/Redundant Host ZT 5524e board is PICMG® 2.16-compliant and offers configurable high availability, I/O expansion and 66MHz CompactPCI® bridging features. A generous set of >> Integrated 512KB Layer2 Cache onboard embedded features and reliable, off-the-shelf architecture address the integration and reliability requirements of OEM systems builders. Support for major operating systems, including real-time software, speeds application development. >> ServerWorks® LE Chipset An optional mezzanine/bridge card, the ZT 4901e provides dual 64/66MHz PMC slots, Com- pactPCI bus-segment bridging at 33MHz or 66MHz, and dual Fibre Channel interfaces. With the >> 33/66MHz, 64-bit addition of the mezzanine/bridge card, the ZT 5524e Single Board Computer supports high avail- CompactPCI System Bus Interface ability Redundant Host operation in the ZT 5085e 12U Redundant Host Packet-Switched Plat- form. The ZT 5524e coupled with the mezzanine/bridge card also supports 66MHz CompactPCI bus-segment bridging in the ZT 5088e 12U General Purpose Packet-Switched Platform. >> Supports up to 4GB, PC133 SDRAM Memory The single-slot ZT 5524e board is part of our IPnexus family of embedded packet products and is also designed to interoperate with any third-party PICMG 2.16-compatible boards. >> 16MB Onboard Flash Memory Contains Field-Upgradeable Bios and Provides Space for User Programs ��!�&8" ���4’ ���4’ ����������� ����������� �������� �������� ����� >> Single 10/100 Mb/s Ethernet ��������������� ����� ,�5 ,�5 Interface (Front Panel Only) ��!�&8" "�����#��$� &���6���� !&’�’’ ,��������� "�����&����� ���������� ����������� ����������� ������� �!!! ������� �!!! ����������� ����������� ����&8" >> Dual 10/100/1000 Mb/s 9/"1�&8" Ethernet Interfaces (Front 3�����������!�/ �’,& "�����3���� Panel and Backplane) "�����!�/ 7�&8" *����������!�/ "�����#��$� %&’’(� ")*+, %�����&����� !)� � ��!������! ��!�&�� ���������! ������������1�����������:������������������� &������-"�. 1������������������� ����������-2��2�. ����������������������������� ���������� !�/�,�00����� !�������� © 2004 Performance Technologies. All rights reserved. 04/16/04. !)� 8"& TM IPnexus ZT 5524e Single Board Computer Highlights Product Interoperability Accepts 2.5" Low-Profile, >> The ZT 5524e processor board is designed to interoperate with the following building blocks (see Board Mounted EIDE Hard individual product briefs for details): Drive or Optional CompactFlash® Type II Drive Platforms Carrier • ZT 4901e: Mezzanine card providing CompactPCI bus-segment bridging at 33 or 66 MHz, dual PMC slots and dual Fibre Channel interface • ZT 5085e: 12U Redundant Host Packet-Switched Platform with 18 node slots, two fabric slots, Standard Memory and Hard >> PICMG 2.16-compliant midplane, two chassis management modules Drive • ZT 5088e: 12U General Purpose Packet-Switched Platform with 18 node slots, two fabric slots, PICMG 2.16-compliant midplane, two chassis management modules • ZT 5091e: 4U Packet-Switched Platform with seven node slots, one dedicated fabric slot, eight Optional ZT 4901e >> rear transition modules slots, one chassis management module Mezzanine/Bridge Card Provides Dual 64/66MHz Ethernet Switches PMC Slots, CompactPCI Bus- • IPnexus switches: 10/100/1000 switches capable of fulfilling the promise of the PICMG 2.16 Segment Bridging at 33 or standard 66MHz and Dual Fibre Channel Interfaces Management • CPC7301: Intelligent shelf manager (ISM) Components • ZT 4807eA: Rear panel transition board • RTM4808A: Rear panel transition board • ZT 90231: PS/2 to XT keyboard adapter Contact Information Performance Technologies 205 Indigo Creek Dr. Rochester, NY 14626 Tel: 585-256-0200 Fax: 585-256-0791 E-mail: sales@pt.com www.pt.com © 2004 Performance Technologies. All rights reserved. TM IPnexus ZT 5524e Single Board Computer Peripherals & I/O Interfaces Ordering Information Specifications I/O Interface Front Panel Rear Compat. The ZT 5524e is compliant with the following Panel The ZT 5524e Single Board specifications: GB Ethernet (2X) RJ-45 J3 82546 Computer may be ordered 10/100 Ethernet RJ-45 N/A 82550 with the following options: • Compliant with PICMG 2.0 R3.0 COM 1 RJ-45 J5 16C550- (CompactPCI) and PICMG 2.1 R2.0 (Hot- compatible >> Base Board COM 2 N/A J5 16C550- Swap) Specifications B1: Single 1GHz Intel® compatible • Compliant with PICMG 2.16 (Packet-Switched PCI Video D-Sub 15-Pin J5 SMI 712 Pentium® III processor, IPMI, Backplane) and 2.9 (CompactPCI System PCI AGP Management) Keyboard 6-Pin mini-DIN† J5 PS/2- B2: Dual 1GHz Intel Pentium • Designed for NEBS Level 3 and ETSI installations compatible III processor, IPMI, AGP Mouse 6-Pin mini-DIN† J5 PS/2- • Compliant with the standard IPMI v1.5 compatible specification Floppy N/A J5 ATA-100 >> Memory M1: 512MB PC133 SDRAM Power EIDE N/A J5 with ECC Dual 1GHz Single 1GHz USB 4-pin USB, port 0 J5 1GB SDRAM 1GB SDRAM M2: 1GB PC133 SDRAM with Current (A) Current (A) † Combination PS/2 mini-DIN connector ECC Max. Voltage (VDC) Typical Max. Typical Note: To provide proper cooling to the ZT 5524e, >> Hard Drive/ each unused slot in the chassis should be 3.5 5.00 V, +5%, -3% 5.1 7.2 3.1 CompactFlash® Carrier populated with an air management blade. All 7.0 3.30 V, +5%, -3% 5.0 7.0 5.0 H0: No hard drive or rear slots should be populated with a rear filler 100m 12.0 V, ±10% 0.3 10mA 100mA 10mA CompactFlash carrier panel. See the list below for orderable H1: EIDE hard drive components: H2: CompactFlash carrier Environmental • To cover a single rear panel slot, use a filler >> I/O Expansion Mezzanine • Required airflow: 250 linear feet per minute panel that is 6U x 4HP (horizontal pitch=0.2") (requires second slot) (LFM) (PN 18299). X0: No mezzanine • Operating temperature: 0º C to 45º C • To cover six rear panel slots, use a filler plate X1: Dual PMC with Fibre • Storage temperature: -40º C to +85º C that is 6U x 24HP (PN 20434). Channel • Non-condensing relative humidity: less than • To fill a front slot, use an air management blade 95% at 40º C that is 6U X 4HP (PN 20456). • To fill a power supply bay, use an air management blade that is 3U X 8HP (PN 20455). Contact Information • To fill an SM slot, use a filler panel that is 3U X 4HP (PN 18309). Performance Technologies 205 Indigo Creek Dr. Rochester, NY 14626 Tel: 585-256-0200 Fax: 585-256-0791 E-mail: sales@pt.com www.pt.com © 2004 Performance Technologies. All rights reserved. 04/16/04.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ZT 5524e have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Ziatech ZPM12B-2 02 Video Cards - SVGA Flat Panel CTRL
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods