TM IPnexus CPC3400 24-Port 10/100 Switching Platform Highlights Carrier-Grade 24 10/100 Port >> Switching Fabric Interfaces with other devices via CompactPCI® Packet Switching Our CPC3400 is an unmanaged, low cost 10/100 Ethernet switching platform. It offers 24 Backplane or rear panel I/O 10/100 auto negotiating Ethernet ports in a rugged, hot-swap, CompactPCI® 6U form factor. connector board The result is a cost-effective switching solution for OEMs & integrators looking to quickly launch carrier-grade IP products with basic Ethernet switching capabilities. PICMG® 2.16-Compliant >> The CPC3400 is compliant with PICMG® 2.16, which offers the option of sending all Ethernet signals through the mid-plane - enabling designers to vastly increase the inter-board communica- tion capabilities of subsystems located in a CompactPCI chassis. By moving system traffic from Wire-Speed Switching >> the shared bus architecture of CompactPCI to a fault-tolerant, yet industry standard switched 5 Gbps switching speed (over 2.1 backplane approach, overall system throughput can be doubled while retaining the inherent ro- million packets/sec with latencies of bustness, reliability and hot-swap capabilities of CompactPCI. less than 12m/sec) ensures packets get switched, not dropped The CPC3400 is ideal for demanding network applications. Each blade "learns" and caches up to 4k MAC addresses in its filtering database and sustains full wire-speed data rates on all ports with its 5 Gbps switching fabric, eliminating congestion in even the busiest environments. The CPC3400 continues our long tradition of offering high-availability, fault-tolerant solutions for the telecom and data communications industries. © 2004 Performance Technologies. All rights reserved. 12/01/04. TM IPnexus CPC3400 24-Port 10/100 Switching Platform Ordering Information Specifications Agency Certifications Internal Switching Capacity • • UL 1950, CSA-C22.2 No. 950 93, FCC Class A >> PT-CPC3400F-11396 5 Gbps, non-blocking full wire-speed L2 (Part 15, Subpart J) 24-port fabric switch ONLY, switching fabric • CE no RTM Latency • ETSI EN 300 386 (pending) • <12m sec • NEBS Level 3-friendly >> PT-CPC3400N-11761 Base Configurations MTBF 24-port node switch ONLY, no • 24 10/100 TX ports (auto negotiating) • Estimated 200,000 hrs RTM Breakout Options • Rear panel RJ-45 connections or 10/100 links over the CompactPCI Packet Switching Backplane CompactPCI Hot-Swap Support • PICMG 2.1, R2.0 • PICMG 2.16 Section 3.5 (hardware connection CompactPCI/PSB layer) hot-swap support MAC Addresses • 4k LED Indicators • Link, activity, speed, load, power and hot-swap Standards • IEEE 802.3, 10BaseT, 100BaseT • IEEE 802.3x Flow Control • IEEE 802.3u Auto-Negotiation Power Requirements • 15W maximum Contact Information System Management • PICMG 2.9 System Management Bus (SMB) Performance Technologies • Peripheral management 205 Indigo Creek Dr. Rochester, NY 14626 Environment Tel: 585-256-0200 • Operating Temp: 32-135°F (0-55°C) Fax: 585-256-0791 • Relative Humidity: 10-90%, non condensing E-mail: sales@pt.com www.pt.com © 2004 Performance Technologies. All rights reserved. 12/01/04.