XVME-689 Very Low Power ® ® Intel Celeron M VME Processor Module Embedded Products You Can Overview The XVME-689 is a powerful, very low power VMEbus PC compatible processor module from XycomVME, the pioneer and leader in VMEbus PC technology. ® The XVME-689 VMEbus processor integrates an Intel ® Celeron M processor running at 1.0GHz with a PCI-to- VMEbus interface. This VME processor module allows users to take advantage of the low power, multiprocessing capability of the VMEbus while using standard off-the- shelf PC software, operating systems and VMEbus I/O modules. Features ● Single Slot 6U single board computer ® ® ● Headless operation using serial console ● Intel Celeron 1.0GHz processor with up to 512KB mode including BIOS setup of level 2 cache ● Rear operation using USB keyboard/mouse and rear ● 855GME and 6300ESB chipset video options ● VGA Graphics out front panel or rear video support ● VME-64 support with Tundra Universe IID A32/A24/ (Pixel resolution up to 1600 X 1200 at 85Hz) A16/D64/D32/D16/D8, MBLT64 and fast hardware ● 256MB, 512MB, 1GB and 2GB of ECC or Non-ECC byte-swapping DDR, 266/333MHz SDRAM ● Parallel Printer Port (ECP, EPP and IEEE1284) ● EIDE Ultra-100 DMA controller supports up to three ● USB 2.0 Ports, one on front two out rear connector EIDE devices (compatible with XVME-977 and XVME-979 Mass Storage Modules) ● Three serial ports (BIOS selectable) ● Optional EIDE On-board 1.8” hard drive or optional - COM1 RS-232/422/485 on front Compact Flash carrier - COM3 RS-232 on front ● Two Serial ATA150 (SATA150) external devices - COM2 RS-232 out rear connector ● Floppy disk interface (compatible with XVME-977) ● Long duration watchdog timer ● Dual 10/100/1000BaseT out front or Vita 31.1 on op- ● Front panel reset switch and status LEDs tional P0 rear connector for in-rack Ethernet switch and ● Audio - line level stereo input and output fail over technology ® ● Software support Libraries for Windows NT , Win- ● One PMC 32/64-bit 33/66MHz site (IEEE P1386/ ® ® ® dows 2000, Windows XP, Windows XP Embed- P1386.1) with front panel I/O bezel and user I/O on op- ® ® ® ® ded, RTX , Linux , QNX , VxWorks and MS-DOS tional P0 rear connector ( others available on request) ● PMC expansion for two additional PMC sites using ● Optional IEEE1101.10 (VME64x Compact PCI type) the XVME-976-209 handles available at order time. XycomVME, Inc. 710 N. Maple Rd. Saline, MI 48176 Ph. 877.944.1942 Fax 734.944.1999 See us at www.xycomVME.com XVME-689 ® ® Intel Celeron M Processor Module CPU - CPU versions available ® ® - 373 Intel Celeron M 1.0 GHz (512KB of L2 Cache) Memory - 256Mb, 512Mb, 1Gb and 2Gb memory sizes available using one 200-pin, 266/333MHz ECC DDR SODIMM Mass Storage EIDE Ultra-DMA 100 interface- - Two channels via P2 or XVME-977/979 Modules - One channel on-board for optional 1.8” EIDE or our Compact Flash carrier - Two Serial ATA150 channels via P2 - Floppy Drive interface via P2 works with XVME-977 Graphics Interface ® - Intel 855GME 2D/3D graphics Controller - Resolutions up to 1600x1200 at up to 16 million colors - Analog video via front panel or P2 Ethernet ® - Using Intel 82546GB, dual 10/100/1000Mbps ports via the RJ-45 front panel or Vita 31.1 support out the P0 Stereo Audio - AD1981B AC97 audio CODEC - Line level stereo input and output via P2 VMEbus Interface Environmental Serial Ports Using Tundra Universe II D RoHS Compliant module - One RS-232/422/485 (COM1) ports via front panel ● Complies with VMEbus Specification, Thermal Operating 0 to 55° ** - One RS-232 (COM3) port via front panel VME-64X (ANSI/VITA 1.1-1997) Thermal Non-Operating -40 to 85° - One RS-232 (COM2) port via P2 (XVME-990) Thermal Operating Extended -25 to 70° ** ● A32/A24/A16:D64/D32/D16/D08 (EO) Thermal Non-Operating Extended -40 to 85° DTB Master PMC Site Humidity Operating/Non-Operating ● A32/A24/A16:D64/D32/D16/D08 (EO) - One PMC site with I/O via front panel or optional P0 10-95% RH, non-condensing DTB Slave connector Shock Operating - 32/64-bit, 33/66MHz PCI operation ● R(0-3) Bus Requester 30g Peak acceleration, 11mSec duration - On board PMC site is 3.3V interface levels ● Interrupter I (1)-I(7) DYN Shock Non-operating - Use our XVME-976-209 to expand to three PMC sites ● IH(1)-IH(7) Interrupt Handler 50g Peak acceleration, 11mSec duration ● SYSCLK and SYSRESET Driver USB 2.0 (Universal Serial Bus) Vibration 5-2KHz - One USB 2.0 port via front panel ● PRI, SGL, RRS Arbiter Operating 0.015” (0.38 mm) Peak to Peak - Two USB 2.0 ports via P2 connector ● RWD, ROR bus release displacement, 2.5g max. acceleration ● Form factor: Double 233.7 mm X 160.0 Non-Operating 0.030” (0.76 mm) Peak to Peak Keyboard and Mouse port mm (9.2” X 6.3”) displacement, 5.0g max. acceleration - Via front panel Altitude Electrical Specification PC-Compatible Real Time Clock Operating Sea level to 10K feet (3Km) ● +5V@2.4A typical (using 1.0 GHz Cel- Parallel Port interface (ECP, EPP and IEEE1284) via P2 Non-Operating Sea level to 40K feet (12Km) eron M w/ 1Gb DRAM) ● +/- 12V@ .1A typical also routed to PMC Long Duration Watchdog timer EMI/EMC site Emmisions EN 55022 Immunity EN 50082-2 NOTE: The XVME-689 requires 300LFM of air flow during operation. XVME-990/1 Rear Transition Module used to connect external devices to the P2 and P0 Order Information connectors of the XVME-689. Mounts on back side of the VMEbus chassis. XVME-990/2 Same as XVME-990/01 but without the P0 connector and 68-pin PMC I/O. Industrial Temperature ( 0 to 55° ) ® ® XVME-977/xx Single slot mass storage module with 2.5” hard drive and 3.5” 1.44Mb floppy XVME-689/1YX ● 1.0 GHz Intel Celeron M CPU drive. Connects to the P2 of the XVME-689 via a 64 pin ribbon cable. Extended Temperature ( -25 to 70° ) XVME-979/0xx Single slot mass storage module with 2.5” hard drive and CD-ROM R/W drive. (optional DVD/CD-ROM R/W available). Connects to the P2 of the XVME-689 ® ® XVME-689/1YXE ● 1.0 GHz Intel Celeron M CPU via a 64 pin ribbon cable provided with the XVME-979. XVME-976/209 Single Slot dual PMC carrier module for use with the XVME-689, provides two 32-bit/33MHz 5V PMC sites with front panel I/O cutout. Y = 1 VME-64 IEEE 1101.0 handles (Standard VME type handles) X =1 for 256MB ECC DRR SDRAM Y = 2 VME-64x IEEE 1101.10 handles (cPCI type handles) X = 2 for 512MB ECC DRR SDRAM Y = 3 VME-64 IEEE 1101.0 handles and optional P0 (Vita 31.1 and PMC rear I/O) X = 3 for 1GB ECC DRR SDRAM Y = 4 VME-64x IEEE 1101.10 handles and optional P0 (Vita 31.1 and PMC rear I/O) X = 4 for 2GB ECC DRR SDRAM Note: If the user backplane is only a 96-Pin J1/J2 VMEbus the I/O functions on the outer rows of the P1/P2 160-pin VMEbus connector from the XVME-689 are not available via the rear transition module. All functions on the XVME-689 P2 and P0 connectors are supported via connectors on the optional XVME-990 rear transition module. The optional P0 connector does not allow the XVME-689 module to be inserted into some legacy (non VME 64X) chassis. To assure that your chassis supports this feature contact our Application Engineering group at 734.944.1942 (toll free 877-994-1942) or Email: sup- port@xycomvme.com Note: The optional P0 connector is used to implement Vita 31.1 and PMC rear I/O functions XycomVME, Inc. 710 N. Maple Rd. Saline, MI 48176 Ph. 877.944.1942 Fax 734.944.1999 See us at www.xycomVME.com