XVME-6200 ® Intel Core™2 Duo VMEbus Processor Module Overview The XVME-6200 is a powerful VMEbus PC compati- ble processor module from Xembedded, the pioneer and leader in VMEbus PC technology. The XVME-6200 VMEbus processor integrates an ® Intel Core™ 2 Duo processor running in a range of 1.50GHz to 2.16 GHz with a PCI-to-VMEbus inter- face. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O mod- ules. Features ● PMC expansion for two to four additional PCIX sites ● Single Slot 6U single board computer using the XVME-9076 carrier module ® ● Intel 1.5GHz Core™2 Duo and 2.16GHz Core™2 ● Headless operation using serial console Duo processor with up to 4MB of level 2 cache, 667 mode including BIOS setup MHz FSB ● Rear cabling using USB keyboard/mouse ® ® ● Enhanced Intel SpeedStep and rear video options ● E7520 and 6300ESB chipset ● VME-64 support with Tundra Universe IID A32/A24/ A16/D64/D32/D16/D8, MBLT64 and fast hardware ● VGA Graphics out front panel or rear video support byte-swapping (Pixel resolution up to 1600 X 1200 at 85Hz) ● Parallel Printer Port (ECP, EPP and IEEE1284) ● 1GB, 2GB, 4GB and 8GB of ECC DDR2, 400MHz SDRAM Dual Channel ● USB 2.0 Ports, two on front two out rear connector ● EIDE Ultra-100 DMA controller supports up to three ● Three serial ports (BIOS selectable) EIDE devices (compatible with XVME-977 and - COM1 RS-232/422/485 on front XVME-979 Mass Storage Modules) - COM3 RS-232 out rear connector ● Optional EIDE On-board 1.8” hard drive or optional - COM2 RS-232 out rear connector Compact Flash carrier ● Long duration watchdog timer ● Two SATA external devices ● Front panel reset switch and status LEDs ● Floppy disk interface (compatible with XVME-977) ● Audio - line level stereo input and output ● Dual 10/100/1000BaseT out front or Vita 31.1 on op- ® tional P0 rear connector for in-rack Ethernet switch and ● Software support Libraries for Windows 2000, Win- ® ® ® fail over technology dows XP, Windows Vista , Windows XP Embed- ® ® ® ® ded, RTX , Linux , QNX , VxWorks and MS- ● One PMC/XMC 32/64-bit 33/66MHz site (IEEE ® DOS ( others available on request) P1386/P1386.1) with front panel I/O bezel and user I/O on optional P0 rear connector. XMC is PCIe x4 ● Optional IEEE1101.10 (VME64x Compact PCI type) handles available at order time. Xembedded LLC 1050 Highland Dr, Suite E Ann Arbor, MI 48108 Ph. 877.944.1942 Fax 734.975.0588 See us at www.Xembedded.com DS_746200_Rev L XVME-6200 ® Intel Core™2 Duo Processor Module CPU ® 1.50GHz Intel Core™2 Duo processor L7400 ® 2.16GHz Intel Core™2 Duo processor T7400 Memory (dual Channel memory) - 1Gb, 2Gb, 4GB and 8GB memory sizes available using two 200-pin, 400MHz ECC DDR2 Memory Mass Storage EIDE Ultra-DMA 100 interface- - Two channels via P2 use with our XVME-977/979 or XVME-990(RTM) Modules - One channel on-board for optional 1.8” EIDE or our Compact Flash carrier - Two Serial ATA150 channels via P2 - Floppy Drive interface via P2 use with our XVME- 977/979 or XVME-990(RTM) Modules Graphics Interface - Silicon Motion SM722 2D/3D graphics Controller - Resolutions up to 1280X1024 at up to 16M colors - Analog video via front panel or P2 and XVME-990 (RTM) Module Ethernet ® - Using Intel 82571EB, dual 10/100/1000Mbps ports via the RJ-45 front panel or Vita 31.1 support out the P0 Stereo Audio - AD1981B AC97 audio CODEC - Line level stereo input and output via P2 VMEbus Interface Environmental Using Tundra Universe II D RoHS Compliant module Serial Ports ● Complies with VMEbus Specification, - One RS-232/422/485 (COM1) ports via front panel Thermal Operating 0 to 55° ** VME-64X (ANSI/VITA 1.1-1997) Thermal Non-Operating -40 to 85° - Two RS-232 (COM2 and Com3) port via P2 (XVME- ● A32/A24/A16:D64/D32/D16/D08 (EO) 990) Thermal Operating Extended -25 to 70° ** DTB Master Thermal Non-Operating Extended -40 to 85° PMC/XMC Site ● A32/A24/A16:D64/D32/D16/D08 (EO) Humidity Operating/Non-Operating - One PMC site with I/O via front panel or optional P0 DTB Slave 10-95% RH, non-condensing connector. 32/64-bit, 33/66/133MHz PCIX operation ● R(0-3) Bus Requester Shock Operating - Alternatively one XMC slot, XMC PCIe X4 30g Peak acceleration, 11mSec duration ● Interrupter I (1)-I(7) DYN - On board PMC/XMC site is 3.3V interface levels Shock Non-operating ● IH(1)-IH(7) Interrupt Handler - Use our XVME-9076 to expand to two sites, add 50g Peak acceleration, 11mSec duration ● SYSCLK and SYSRESET Driver another XVME-9076 for four PCIX sites. Vibration 5-2KHz Two XVME-9076’s can be stacked. ● PRI, SGL, RRS Arbiter Operating 0.015” (0.38 mm) Peak to Peak ● RWD, ROR bus release displacement, 2.5g max. acceleration USB 2.0 (Universal Serial Bus) ● Form factor: Double 233.7 mm X 160.0 Non-Operating 0.030” (0.76 mm) Peak to Peak - Two USB 2.0 port via front panel mm (9.2” X 6.3”) displacement, 5.0g max. acceleration - Two USB 2.0 ports via P2 connector Electrical Specification Altitude ® Keyboard and Mouse port ● +5V@6.8A typical (using 1.50GHz Intel Operating Sea level to 10K feet (3Km) - Via front panel shared PS/2 Core™2 Duo w/ 1Gb DRAM) Non-Operating Sea level to 40K feet (12Km) PC-Compatible Real Time Clock ● +/- 12V routed to PMC site only, not EMI/EMC required for normal operation. Parallel Port interface (ECP, EPP and IEEE1284) via P2 Emmisions EN 55022 Immunity EN 50082-2 Long Duration Watchdog timer Accessory Products XVME-990/01 Rear Transition Module used to connect external devices to the P2 and P0 Order Information connectors of the XVME-6200. Mounts on back side of the VMEbus chassis. Industrial Temperature ( 0 to 55° )* 300 LFM Air Flow XVME-990/02 Same as XVME-990/01 but without the P0 connector and 68-pin PMC I/O. ® XVME-6200/9YX ● 2.16GHz Intel Core™2 Duo CPU T7400 ® XVME-6200/8YX ● 1.50GHz Intel Core™2 Duo CPU L7400 XVME-977 Single slot mass storage module with 2.5” hard drive and 3.5” 1.44Mb floppy drive. Connects to the P2 of the XVME-6200 via a 96 pin ribbon cable. Extended Temperature ( -25 to 70° ) Available XVME-979 Single slot mass storage module with 2.5” hard drive and CD-ROM R/W drive. add ‘E’ to end of model number (optional DVD/CD-ROM R/W available). Connects to the P2 of the XVME-6200 via a 96 pin ribbon cable provided with the XVME-979. Note: If the user backplane is only a 96-Pin J1/J2 VMEbus the I/O functions on the outer rows of the P1/P2 160-pin VMEbus connector from the XVME-6200. All functions on the XVME-9076 Single Slot dual PMC carrier module for use with the XVME-6200, provides two XVME-6200 P2 and P0 connectors are supported via connectors on the optional XVME-990 32/64-bit/33/66/133MHz 3.3V PCIX sites with front panel I/O cutout. Two rear transition module. contact our Application Engineering group at carriers can be stacked to provide a total of 5 PMC sites. 734.975.0577 or Email: suport@xembedded.com with any questions. Note: The optional P0 connector is used to implement Vita 31.1 and PMC rear I/O functions XVME-912 Compact Flash mounting kit for XVME-6200. (Flash module not included) XVME-913 On-Board 1.8” hard drive kit for XVME-6200. Y = 1 VME-64 IEEE 1101.0 handles (Standard VME type handles) Memory amounts shown are total on-board memory Y = 2 VME-64x IEEE 1101.10 handles (cPCI type handles) X = 2 for 1GB ECC DRR2 SDRAM Y = 3 VME-64 IEEE 1101.0 handles and optional P0 (Vita 31.1 and PMC rear I/O) X = 3 for 2GB ECC DRR2 SDRAM Y = 4 VME-64x IEEE 1101.10 handles and optional P0 (Vita 31.1 and PMC rear I/O) X = 4 for 4GB ECC DRR2 SDRAM X = 5 for 8GB ECC DRR2 SDRAM Xembedded LLC 1050 Highland Dr, Suite E Ann Arbor, MI 48108 Ph. 877.944.1942 Fax 734.975.0588 See us at www.Xembedded.com DS_746200_Rev L