XVME-977X Hard Drive/Floppy Drive Module Now Available in RoHS Version The XVME-977 Hard Drive/Floppy Drive module provides an easy way to integrate both hard and FEATURES floppy disk drives into a VMEbus system, while oc- � 2.5" IDE hard drive cupying only one double-high VMEbus slot. � PC-compatible 1.44 MB 3.5" floppy drive The XVME-977 contains a 2.5" IDE hard drive and � Occupies only one VME bus slot a 0.5" high 1.44 MB 3.5" floppy drive. The unit � Automatic retry on errors plugs easily into the VMEbus backplane, with the � Transparent defect mapping reassigns IDE hard drive and floppy drive signals routed defective sectors discovered in the field through the P2 connector and connected via a short without reformatting (S.M.A.R.T.). ribbon cable (included). � Fits into any standard 6U VMEbus card The XVME-977 Hard Drive/Floppy Drive Module is cage ideally suited for use with XycomVME's � Easily removable XVME-690, XVME-689, XVME-661, XVME-660, XVME-653, � Solid-state ATA Flashdisk support optional XVME-658 and XVME-659 VMEbus PC/AT Processor modules. The compact design and easy installation � Compatible with XVME-979/1 CD-ROM module make the XVME-977 an ideal mass storage solution
Compatible with XVME-979/3 CD-ROM R/W modulefor a variety of VMEbus systems. DS-74977X Rev. FX PRODUCT SPECIFICATIONS AND RATINGS Hardware Dimensions • Form factor: DOUBLE  9.2" x 6.3" (233 mm x 160 mm) Hard Drive Interface EIDE Type 2.5" Data Transfer Rate 372Mbits/sec burst 8 MB Data Buffer Seek Times XVME-977X/11  Average Access: 12 msec., Track to Track: 4 msec. Floppy Drive Interface SA-450 Compatibility 3.5", 1.44 MB Power Supply Hard Drive +5V, 1.1A max. (spin-up peak), 0.4 typical Floppy Drive  +5V, 0.74 max. (spin-up-peak), 0.4 typical Flash Drive  Sleep: <5mA  Access: 25mA (maximum) The XVME-977X draws its power and its ground reference from the VMEbus P1 connector. Controller signals are taken from the P2 connector. Environmental Operating Nonoperating Temperature 0º C to 50º C (32º to 122º F) -40º C to 60º C (-40º to 140º F) Humidity 20% to 80% RH, non condensing 20% to 80% RH, non condensing a Shock 5g peak acceleration, 11 msec duration 100g peak acceleration, 11 msec duration Vibration .015” (.38mm) peak-to-peak displacement .030” (.76mm) peak to peak displacement 0-500 Hz 0.5g (maximum) acceleration 1.0g (maximum) acceleration Altitude Sea level to 10,000 ft. (3048 m) Sea level to 40,000 ft. (12192 m) ORDERING INFORMATION Order Number Description XVME-977X/11 Hard Drive/FloppyDrive module, with 2.5" hard drive Module shipped with 96 pin interconnect cable to connector to our processor modules XycomVME, Inc. 710 N. Maple Rd. Saline, MI 48176 Ph. 734.944.1942 Fax. 734.944.1999 ©2005 XycomVME, Inc. All rights reserved. Printed in USA. Web site: www.xycomvme.com All brand or product names are the property of their respective owners. Specifications may change without notice.