XVME-560 Analog Input Module Features Overview • 64 single-ended or 32 differential channels The XVME-560 Analog Input Module is a powerful • 12-bit input resolution VMEbus-compatible analog input module capable of • On-board DC/DC converter performing 12-bit A/D conversions on up to 64 • Jumper-selectable voltage ranges: 0-5 V, different input channels. 0-10 V, ±2.5 V, ±5 V, and ±10 V • Software-programmable gain: 1, 2, 4 or 8 The XVME-560 can be programmed to operate in • Can interrupt at any of seven VMEbus interrupt one of four operating modes: random channel, sequen- levels tial channel, single-channel, or external-trigger mode. After the completion of an A/D conversion, an optional Applications interrupt may be generated. • Slide wires The XVME-564 can sample unipolar and bipolar • Analytical equipment inputs, with voltage ranges of 0-5 V, 0-10 V, ±2.5 V, • Microphones ±5 V, and ±10 V. Programmable gains of 1, 2, 4, or • RTDs and thermistors 8 may be software-selected. • Temperature transmitters • Strain gauges and load cells • Tach generators © Xycom Automation DS-74560-001 Rev E Hardware Specifications Environmental Specifications Temperature Number of Channels Operating 0º to 65°C (32º to 149ºF) Single-ended 64 Nonoperating -40º to 85ºC (-40º to 185ºF) Differential 32 A/D Input Full Scale Voltage Ranges Humidity (Jumper-selectable) Operating: 20 to 80% RH, non-condensing Unipolar 0-5 V, 0-10 V Nonoperating 20 to 90% RH, non-condensing Bipolar ±2.5 V, ±5 V, ±10 V Software-Programmable Gain Altitude 1, 2, 4 or 8 Operating Sea level to 10,000 ft. (3048m) Effective Full-Scale Input Ranges Nonoperating Sea level to 40,000 ft (12192 m) Unipolar 0-625 mV to 0-10 V Vibration Bipolar ±312.5 mV to ±10 V Operating 5 to 2,000 Hz Maximum Input Voltage .015" (0.38 mm) peak-to-peak (without damage) displacement Power on ±44 V 2.5g (max.) acceleration Power off ±30 V Nonoperating 5 to 2,000 Hz Input Impedance .030" (0.76 mm) peak-to-peak w/ 22M ohm resistor 17M ohm, min. displacement w/o 22M ohm resistor 100M ohm, min. 5.0 g (max.) acceleration Bias Current ±100 nA, max. Input Capacitance 225 pF, max. Shock Operating Common Mode Voltage +14 V Operating 30 g peak acceleration, Accuracy 11 msec duration Resolution 12 bits Nonoperating 50 g peak acceleration Overall error ±1/2 LSB 11 msec duration Differential linearity ±1 LSB System accuracy VMEbus Compliance with Gain = 1 ±0.025% of FSR Complies with VMEbus Specification, IEEE 1014 with Gain = 8 ±0.05% of FSR A16/A24:D16/D08(EO) DTB Slave Common Mode Rejection Ratio 74 db, min Interrupter - I(1)-I(7)(STAT), RORA Monotonicity Guaranteed Interrupter Vector - D08(O)(DYN) Speed Utility Signals - SYSFAIL Conversion time 50 µsec Form Factor - NEXP Throughput 20K conversions/sec Conforms to Xycom Automation Standard I/O Power Requirements ±5 V typical, 2.00 A Architecture Ordering Information Warranty XVME-560: 64 SE/32 DI Channel Analog Input The XVME-560 carries a two-year warranty. Module (with Programmable Gain) XYCOM AUTOMATION, INC. XYCOM CANADA, INC. XYCOM AUTOMATION LTD. XYCOM AUTOMATION S.r.L. 750 North Maple Road 461 North Service Road West, Unit B36 NORTHERN EUROPE SOUTHERN EUROPE Saline, Michigan 48176-1292 Oakville, Ontario L6M 2V5 Canada 21 Tenter Road, Moulton Park Via Chambery 93/107/U Phone: (734) 429-4971 Phone: (905) 825-0281 Northampton NN3 6AX England 10142 Torino, Italy FAX: (734) 429-1010 FAX: (905) 825-0282 Phone: +44-1604-790-767 Phone: 39-011-770-5311 Call toll-free: 1-800-AT-XYCOM FAX: +44-1604-790-722 FAX: 39-011-770-53270 http://www.xycomautomation.com/ XVME-560, page 2 Specifications subject to change without notice. Brand or product names are trademarks or registered trademarks of their respective owners.