○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Xycom Automation, Inc. is a subsidiary of Pro-face America, Inc. Industrial Flat Panel Monitors DS-300001(D) 20” 15” 10” 12” 18” Xycom Automation industrial flat panel (FP) monitors meet the rigorous requirements of the plant floor with high-resolution flat panel displays in rugged housings. They deliver crisp, bright text and graphics with a low current draw, and fit into panels that CRTs can't. ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Extended Connection Distance monitors, this touch screen option F E A T U R E S does not use an expansion slot for With cables from 10 feet to 50 feet, � 10.4” to 20.1” bright, easy-to-read the controller card—only a serial Xycom provides more flexibility in color TFT flat panel display with ® port is needed. Windows and MS- placing your industrial monitor on screen resolution from VGA to ® DOS drivers are provided. the plant floor. SXGA � Large viewing area and viewing Sharp, Easy-to-Read Displays On-screen Configuration angles Front panel controls and on-screen Bright TFT screens display com- � Operator input through an optional menus make monitor configuration plex operations with clarity. With integrated touch screen a snap. Most models include a individual monitor brightness rang- � Front panel controls with onscreen switch on the rear of the unit that ing from 200 to 300 Nit, contrast menus (lock switch on rear of ratios of 300:1, and wide horizon- disables the front panel controls. units) tal and vertical viewing angles, our Scaling � Long-lasting backlights monitors offer superb viewing per- formance. Color ranges from 18- These Xycom FP monitors support � Hinged design for easy backlight bit (262,144 colors) for the smaller several different video display replacement (VT1040 and XT1502) units (10"-15") to 32-bit (16.7 mil- modes. All models (except � Simple mounting lion) for the 20" monitor. All models VT1040) support scaling so that a � Shallow mounting depth accept standard 15-pin VGA inputs lower resolution image is enlarged � Up to 50 foot cables (also see the section on the spe- to fill the display screen. � 19" EIA rack-mountable cial features of the SXT1811 later � NEMA 4/4X/12 front panel Easy Installation in this document). � UL and cUL listed, CE marked All five standard monitors fit into High-Performance T ouchscreen � Units ship with all necessary cables shallow mounting areas, requiring For applications requiring operator and software about 3" of depth. The XT1502, input, the optional analog resistive SXT1811, and SXT2011 models touch screen offers high resolution have recessed connectors for all and durability (35 million touches). cabling so that no additional Unlike many other touch screen mounting depth is required. Page 1 Custom clips are used to component video, S-video, NTSC, and PAL/ secure the monitor to the SECAM inputs. It can also display picture in picture. panel (see right), eliminating Finally, the SXT1811 comes with a high-quality the need to drill holes in the scaling engine and supports vertical refresh rates panel for studs. as high as 85 Hz. Other Xycom and Pro-face Flat Panel The VT1040, ST1210, and XT Monitor Offerings 1502 can be fitted with an adapter plate for a standard Xycom sells other FP monitors in addition to the 19" EIA rack-mount. The SXT1811 has a custom line of monitors described in this datasheet, specifi- front panel bezel instead of an adapter plate. cally the 5000 series. The KPM(T) FP monitors [5012KPM(T) and 5015KPM(T)] come with either Long-Life Backlights and Backlight 12.1” or 15” TFT LCD displays, and are equipped Replacement with full alphanummeric membrane keyboards, Interlink Versa point pointing devices and optional All Xycom FP monitor models come standard with analog resistive touch screens. The 5015T 15" XGA long-life backlights, 50,000 hours typical. (1024x768) monitor and 5017T 17” SXGA (1280 x The VT1040, ST1210, and XT1502 models are 1024) monitor both come with touch screen opera- designed with field replacement of backlights in tor input. All of the 5000 series FP monitors have mind. These three models have thumbscrews on NEMA 4/4X/12 front panels, and are mounted using the back to facilitate opening the units for cleaning simple mounting clips. These monitors are UL508 or backlight replacement. The ST1210 model has Listed, CE compliant and UL approved for use in four thumbscrews and a back panel that lifts off Class I & II, Division 2 Hazardous Locations. the unit, but the VT1040 and the Xycom also offers a line of Pro-face flat panel TFT XT1502 models are monitors. The FP2000 Series offers the 10.4" VGA even more convenient. 640x480 FP-2500T and the 12.1" SVGA 800x600 They employ a special FP-2600T. This series features identical cutout hinged design (see sizes, NEMA 4/4X/12 front panels, 18-bit color right) with two thumb- (262,144 colors), 50,000 hour user-replaceable screws to make backlights, analog resistive touch screens, and a access even easier. 2.28" mounting depth. The 14.1" XGA (1024x768) FP-790T is similar, but has a 30,000 hour backlight, SXT1811 Special Features an IP65 front panel, and a 3.0" mounting depth. The SXT1811 has several unique features in For more information on these and other Xycom addition to the standard features already outlined. FP monitor offerings, consult our website at This FP monitor can accept composite video, www.xycom.com. 12" AND 15" ENCLOSED UNITS FOR SWING ARM MOUNTING The ST1210 and XT1502 mod- els have an optional metal back cover to fully enclose the unit (the -EN ordering option). These units are designed for freestand- ing applications and are in- tended to be mounted on a standard 75mm VESA pendent or swing arm such as the ® popular Ergotron 400 series. Page 2 DISPLAY SPECIFICATIONS VT1040 ST1210 XT1502 Display Size (diagonal)/ 10.4”/8.32” x 6.24” 12.1”/9.69” x 7.26” 15.0”/11.97” x 8.98” Active Area (H x V) Resolution VGA: 640x480 SVGA: 800x600 XGA: 1024x768 (1 pixel = R+G+B dots) Scaling No No Yes Brightness 300 Nit 250 Nit 200 Nit Contrast Ratio 300:1 300:1 300:1 Color Density 262,144 colors 262,144 colors 262,144 color Horizontal Viewing Angle 120° 140° 120° Vertical Viewing Angle 100° 110° 130° Backlight Life 50,000 hours 50,000 hours 50,000 hours Field Replace Bulbs? Yes Y es Yes SXT1811 SXT2011 Display Size (diagonal)/ 18.1”/14.134” x 11.307” 20.1”/15.72” x 12.58” Active Area (H x V) Resolution SXGA: 1280x1024 SXGA: 1280x1024 Scaling Yes Y es Brightness 235 Nit 250 Nit Contrast Ratio 300:1 300:1 Color Density 16.7 million colors 16.7 million colors Horizontal Viewing Angle 160° 170° Vertical Viewing Angle 160° 170° Backlight Life 50,000 hours 50,000 hours Field Replace Bulbs No No Page 3 GENERAL SPECIFICATIONS AND RATINGS Environmental Operating Nonoperating a Thermal 0°C to 50°C -20°C to 60°C Humidity 20% to 80% RH, noncondensing 20% to 80% RH, noncondensing Shock 15g peak acceleration, 11 msec duration 30g peak acceleration, 11 msec duration Vibration 0.006” peak to peak displacement 0.015” peak to peak displacement 5-2000 Hz 1.0g maximum acceleration 2.5g maximum acceleration b Altitude Sea level to 10,000 ft. Sea level to 40,000 ft. a The thermal values for the enclosure versions of the ST1210 and XT1502 units are 0°C to 45°C. b Consistent with internal component specifications Electrical VT1040, ST1210, XT1502 SXT1811, SXT2011 AC Power 100-240 VAC, 1.0 A max, 50/60 Hz 100-240 VAC, 1.0 A max, 50/60 Hz DC Power 15-28 VDC, 1.0 A max. 18-36 VDC, 3.3 A max. Front Panel � NEMA 4/4X/12 (not applicable to enclosure versions of the ST1210 and XT1502 units) Regulatory Compliance CE � EN 55022: Class A � EN 61000-6-2 � EN 60950 FCC � 47 CFR, Part 15, Class A Safety Agency Approvals UL � UL 508 Listed cUL � CSA-C22.2, #142 Listed Page 4 PRODUCT AND MOUNTING DIMENSIONS VT1040 Mounting VT1040 Product Dimensions VT1040 Height 10.50” (266.7 mm) Width 12.60” (320.0 mm) Depth 3.25” (82.6 mm) 1 Mounting Depth 3.00” (76.2 mm) Weight 10 lbs. (4.5 kg) 1 Leave at least an additional 2.5” for power cords and cables at- tached to the back of the unit. ST1210 Product Dimensions ST1210 Mounting 2 ST1210 ST1210-EN Height 11.45” (290.8 mm) 11.45” (290.8 mm) Width 13.87” (352.3 mm) 13.87” (352.3 mm) Depth 3.25” (82.6 mm) 2.93” (74.4 mm) 1 Mounting Depth 3.00” (76.2 mm) N/A Weight 13 lbs. (5.9 kg) 15 lbs. (6.8 kg) 1 Leave at least an additional 2.5” for power cords and cables at- tached to the back of the unit. 2 Enclosed units are designed to be mounted on industry standard 75 mm VESA pendent or swing arm mounts. This requires four 10-32 x 3/8 screws. XT1502 Product Dimensions XT1502 Mounting 1 XT1502 XT1502-EN Height 13.48” (342.4 mm) 13.48” (342.4 mm) Width 16.48” (418.6 mm) 16.48” (418.6 mm) Depth 3.25” (82.6 mm) 3.18” (80.8 mm) Mounting Depth 3.00” (76.2 mm) N/A Weight 16 lbs. (7.3 kg) 19 lbs. (8.6 kg) 1 Enclosed units are designed to be mounted on industry standard 75 mm VESA pendent or swing arm mounts. This requires six 10-32 x 3/8 screws. Page 5 PRODUCT AND MOUNTING DIMENSIONS (CONTINUED) SXT1811 Product Dimensions SXT1811 Mounting SXT1811 Height 15.70” (398.8 mm) Width 18.51” (470.2 mm) Depth 3.73” (94.7 mm) Mounting Depth 3.48” (88.4 mm) Weight 21.5 lbs. (9.8 kg) SXT2011 Mounting SXT2011 Product Dimensions SXT2011 Height 17.18” (436.4 mm) Width 20.32” (516.1 mm) Depth 3.90” (90.1 mm) Mounting Depth 3.65” (92.7 mm) Weight 21.5 lbs. (9.8 kg) Page 6 ORDERING INFORMATION Standard Configurations These are the default configurations for the different monitors. Use the configurators on the next page to determine ordering numbers for any available options. Example Order Number Description VT1040 10.4” VGA NEMA 4/4X/12 TFT color industrial monitor. Supports resolutions up to 640x480 with 262,144 colors. Features include quick access design for easy backlight replacement, front panel controls with onscreen menus, a bright 300 Nit display, and 50,000 hour backlights. Includes AC line cord and 10’ video cable (3000-CBL-10V). VT1040T-A VT1040 with antiglare resistive touchscreen and serial RS-232 controller. Includes software and 10’ touchscreen cable (CBL-SER10MF). ST1210 12.1” SVGA NEMA 4/4X/12 TFT color industrial monitor. Supports resolutions up to 800x600 with 262,144 colors. Features include quick access design for easy backlight replacement, front panel controls with onscreen menus, a bright 250 Nit display, and 50,000 hour backlights. Includes AC line cord and 10’ video cable (3000-CBL-10V). ST1210T-A ST1210 with antiglare resistive touchscreen and serial RS-232 controller. Includes software and 10’ touchscreen cable (CBL-SER10MF). 1 ST1210T-A-EN ST1210T-A with fully enclosed back cover suitable for pendent or swing arm mounting. XT1502 15.0” XGA NEMA 4/4X/12 TFT color industrial monitor. Supports resolutions up to 1024x768 with 262,144 colors. Features include quick access design for easy backlight replacement, front panel controls with onscreen menus, a bright 200 Nit display, and 50,000 hour backlights. Includes AC line cord and 10’ video cable (3000-CBL-10V). XT1502T-A XT1502 with antiglare resistive touchscreen and serial RS-232 controller. Includes software and 10’ touchscreen cable (CBL-SER10MF). 1 XT1502T-A-EN XT1502T-A with fully enclosed back cover suitable for pendent or swing arm mounting. SXT1811 18.1” SXGA NEMA 4/4X/12 TFT color industrial monitor. Supports resolutions up to 1280x1024 with16.7 million colors. Features include front panel controls with onscreen menus, a bright 235 Nit display, and 50,000 hour backlights. Includes AC line cord and 10’ video cable (3000-CBL-10V). SXT1811T-A SXT1811 with antiglare resistive touchscreen and serial RS-232 controller. Includes software and 10’ touchscreen cable (CBL-SER10MF). SXT2011 20.1” SXGA NEMA 4/4X/12 TFT color industrial monitor. Supports resolutions up to 1280x1024 with16.7 million colors. Features include front panel controls with onscreen menus, a bright 250 Nit display, and 50,000 hour backlights. Includes AC line cord and 10’ video cable (3000-CBL-10V). SXT2011T-A SXT2011 with antiglare resistive touchscreen and serial RS-232 controller. Includes software and 10’ touchscreen cable (CBL-SER10MF). 1 The enclosure does not have a NEMA 4/4X/12 rating. Accessories (ordered separately) Order Number Description MTG-RM1040 Adapter plate for mounting VT1040 in 19” rack; panel height is 12.25” (7U). MTG-RM1210 Adapter plate for mounting ST1210 in 19” rack; panel height is 12.25” (7U). MTG-RM1500 Adapter plate for mounting XT1502 in 19” rack; panel height is 14.00” (8U). 3000-CBL-10V 10’ (3 m) coaxial VGA cable [male-male]; connects monitor to a standard VGA card. 3000-CBL-25V 25’ (7.5 m) coaxial VGA cable [male-male]; connects monitor to a standard VGA card. 3000-CBL-50V 50’ (15 m) coaxial VGA cable [male-male]; connects monitor to a standard VGA card. CBL-SER10MF 10’ (3 m) serial touchscreen cable; connects monitor to standard 9-pin RS-232 port. CBL-SER25MF 25’ (7.5 m) serial touchscreen cable; connects monitor to standard 9-pin RS-232 port. CBL-SER50MF 50’ (15 m) serial touchscreen cable; connects monitor to standard 9-pin RS-232 port. Page 7 ORDERING INFORMATION (CONTINUED) Flat Panel Monitors, 10" through 15" Standard Configurations VT1040 ST1210 XT1502 Flat Panel Monitors, 18" through 20" Standard Configurations SXT1811 SXT2011 Xycom Automation, Inc. 750 North Maple Rd. Saline, MI 48176-1292 Phone: 734-429-4971 Fax: 734-429-1010 http://www.xycom.com © 2002 Xycom Automation, Inc. Is a wholly owned subsidiary of Pro-face America, Inc. Specifications may change without notice. Xycom Automation is a trademark of Xycom Automation. Other brand or product names are the property of their respective owners. Page 8