Manufacturers
XP POWER SMQ600PS27-C
Description
XP Power SMQ600PS27-C 600W AC/DC U-Channel Power Supply
Part Number
SMQ600PS27-C
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
POWER SUPPLY
Specifications
Cooling
Via internal temperature controlled fan
Current Share
10% where fitted
Efficiency
80% min at 230 VAC, 70% min for Vo
Hold Up Time
20 ms min at 120 VAC & 80% load
Initial Set Accuracy
±1%
Input Current
8 A/10 A at 90 VAC
Input Frequency
47-63 Hz
Input Voltage
90-264 VAC
Isolation
3000 VAC Input to Output, 1500 VAC Input to Ground, 125 VAC Output to Ground
Line Regulation
±0.5% from low line to high line
Load Regulation
±1%
Minimum Load
No minimum load required
MTBF
100,000 hrs per MIL-HDBK-217F
Operating Altitude
3000 m
Operating Temperature
0 °C to +70 °C derate from 100% load at +50 °C to 50% load at +70°C
Output Voltage
3.3 VDC to 54 VDC
Output Voltage Adj
±5%
Over-temperature Protection
>85°C ambient with auto recovery measured internally
Over-Voltage Protection
>130% recycle input to reset
Over/Under Shoot
5% max
Overload Protection
110% to 135% with auto recovery
Power Density
6.93 W/in3
Power Factor
0.99 typical
Relative humidity
5% to 90%, non-condensing
Remote On/Off
On - TTL Logic HIGH, or open circuit; Off - TTL Logic LOW or short circuit
Remote sense
Compensates for up to 0.5 V drop
Ripple & Noise
50mV (Vo-12V)
Signals
Green LED for Power On; DC OK TTL HIGH within 100-500 ms; LOW less than or equal to1 ms before loss of regulation
Start Up Delay
1 s max at 120 VAC
Storage Temp
-20 °C to +85 °C
Switching Frequency
PFC stage 100 kHz, PWM stage 60 kHz typically
Transient Response
5% max deviation, 500 µs recovery to within 1% for a 50% load change
Under-voltage Protection
Shutdown below 80 VAC (±5 V), restart above 86 VAC
Vibration
5-50 Hz, acc. 7.35 ms2 on X, Y & Z axis
Features
- Active PFC
- High Peak Load Rating
- High Power Density
- Optional Current Share & ORing Diode
- Single Outputs from 3.3 V to 54 V
- Universal Input
Datasheet
Extracted Text
AC/DC Chassis Mount 500/600 Watts THE XPERTS I N POWER SMQ500/600 Series High Power Density • • High Peak Load Rating • Active PFC • Universal Input • Single Outputs from 3.3 V to 54 V • Optional Current Share & ORing Diode Specification Input General Input Voltage • 90-264 VAC Efficiency • 80% min at 230 VAC, 70% min for Vo <=5V Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output Input Current • 8 A/10 A at 90 VAC - SMQ500/600 1500 VAC Input to Ground Inrush Current • 70 A pk at 230 VAC 125 VAC Output to Ground Power Factor • 0.99 typical Switching Frequency • PFC stage 100 kHz, Leakage Current • <3.5 mA PWM stage 60 kHz typically 3 Power Density • 6.93 W/in Output Signals • Green LED for Power On Output Power • See Tables DC OK TTL HIGH within 100-500 ms Output Voltage • 3.3 VDC to 54 VDC LOW ≤1 ms before loss of regulation Output Voltage Adj. • ±5% MTBF • 100,000 hrs per MIL-HDBK-217F Minimum Load • No minimum load required Environmental Start Up Delay • 1 s max at 120 VAC Hold up Time • 20 ms min at 120 VAC & 80% load Operating • 0 °C to +70 °C derate from 100% load Temperature at +50 °C to 50% load at +70°C Initial Set Accuracy • ±1% Storage Temp • -20 °C to +85 °C Line Regulation • ±0.5% from low line to high line Cooling • Via internal temperature controlled fan Load Regulation • ±1% Relative Humidity • 5% to 90%, non-condensing Over/Under Shoot • 5% max Operating Altitude • 3000 m Current Share • 10% where fitted 2 Vibration • 5-50 Hz, acc. 7.35 ms on X, Y & Z axis Ripple & Noise • 50mV (Vo<=5V), 1% (Vo>=12V) Transient Response • 5% max deviation, 500 µs recovery EMC & Safety to within 1% for a 50% load change Safety Approvals • UL1950, CSA C22.2 No 950, EN60950, Overvoltage • >130% recycle input to reset CE Mark LVD Protection EMC • Meets EN61000-3-2, -3, FCC Part 15 & Overload Protection • 110% to 135% with auto recovery CISPR 22 Class B conducted Overtemperature • >85°C ambient with auto recovery ESD Susceptibility • EN61000-4-2 Level 3 Perf Criteria A Protection measured internally Radiated • EN61000-4-3 3 V/m Perf Criteria A Undervoltage • Shutdown below 80 VAC (±5 V), Susceptibility Protection restart above 86 VAC EFT/Burst • EN61000-4-4 Level 2 Perf Criteria A Remote Sense • Compensates for up to 0.5 V drop Surge • EN61000-4-5 Level 3 Perf Criteria A Remote On/Off • On = TTL Logic HIGH, or open circuit Off = TTL Logic LOW or short circuit Conducted • EN61000-4-6 3 V Perf Criteria A • • www.xpplc.com sales@xpplc.com OUTPUT VOLTAGE & CURRENT RATINGS - 500 WATT MODELS SMQ500 Maximum Output Output Current Ripple Model (4) (1) (3) (5, 8) Power Voltage Maximum Peak & Noise Number 330 W 3.3 V 100.00 A 180.00 A 50 mV SMQ500PS03-C* 400 W 5.0 V 80.00 A 160.00 A 50 mV SMQ500PS05-C* 500 W 12.0 V 41.67 A 75.00 A 120 mV SMQ500PS12-C* 500 W 15.0 V 31.00 A 56.00 A 150 mV SMQ500PS15-C* 500 W 24.0 V 20.83 A 40.00 A 240 mV SMQ500PS24-C* 500 W 27.0 V 18.50 A 40.00 A 270 mV SMQ500PS27-C 500 W 48.0 V 10.42 A 18.80 A 480 mV SMQ500PS48-C* 500 W 54.0 V 9.25 A 18.80 A 540 mV SMQ500PS54-C OUTPUT VOLTAGE & CURRENT RATINGS - 600 WATT MODELS SMQ600 Maximum Output Output Current Ripple Model (4) (1) (3) (5, 8) Power Voltage Maximum Peak & Noise Number 396 W 3.3 V 120.00 A 180.00 A 50 mV SMQ600PS03-C* 500 W 5.0 V 100.00 A 160.00 A 50 mV SMQ600PS05-C* (6) 600 W 12.0 V 50.00 A 75.00 A 120 mV SMQ600PS12-C* (7) 600 W 15.0 V 40.00 A 56.00 A 150 mV SMQ600PS15-C* (7) 600 W 24.0 V 25.00 A 40.00 A 240 mV SMQ600PS24-C* (7) 600 W 27.0 V 22.20 A 40.00 A 270 mV SMQ600PS27-C (7) 600 W 48.0 V 12.50 A 18.80 A 480 mV SMQ600PS48-C* (7) 600 W 54.0 V 11.10 A 18.80 A 540 mV SMQ600PS54-C Notes 1. Standard models have trip & restart mode current protection with a high peak load capability. This peak can be taken for 1 ms only. 2. For optional constant current versions, add suffix ‘B’ to model number (current limit range is 95-105% of max output current). 3. Ripple and noise measured using 0.1 µF ceramic and 22 µF electrolytic capacitor, 20 MHz bandwidth. 4. Other output voltages are available, contact Sales for details. 5. For optional current share add suffix ‘I’ to model number, for optional ORing diode add suffix ‘O’. 6. Optional high power version available giving 720 W with input above 180 VAC only, add suffix ‘-H’ to model number. 7. Optional high power version available giving 800 W with input above 180 VAC only, add suffix ‘-H’ to model number. 8. For optional IEC320 inlet replace ‘C’ in model number with ‘D’. * Also available from Farnell InOne, see pages 350 & 351. • Mechanical Details CN4 (Signals) Pin Function 1 ROF 2DCOK 3RTN NOTES: CN5 (Remote Sense) 1. Dimensions in inches (mm). Pin Function 2. Remote ON/OFF CN4 mates with JST XHP-3 or equivalent 1+ RS 3. Remote sense CN5 and fan CN3 mates with JST XHP-2 or equivalent. 2- RS 4. Weight: 1.1 kg. www.xpplc.com sales@xpplc.com Rev 3.0
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SMQ600PS27-C have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
XP Power AEH130PS15 Power Supplies - Output Power Max: 130 W Voltage Nom: 15.0 V AEH130 Series
XP Power AEH130PS18 Power Supplies - Output Power Max: 130 W Voltage Nom: 18.0 V AEH130 Series
XP Power AEH130PS36 Power Supplies - Output Power Max: 130 W Voltage Nom: 36.0 V AEH130 Series
XP Power AEH130PS3V3 Power Supplies - Output Power Max: 90 W Voltage Nom: 3.3 V AEH130 Series
XP Power AEH130PS48 Power Supplies - Output Power Max: 130 W Voltage Nom: 48.0 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods