Manufacturers
XP POWER SDS60UT05
Description
XP POWER SDS60UT05 ACDC Switching Power Supply. Maximum Output Power 63 W | Input Voltage 90-264 VAC | Output Voltage Nominal 5V, 12V, -12V
Part Number
SDS60UT05
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
POWER SUPPLY
Specifications
Depth or Length
127 mm
Efficicency
80% typical, 85% max
Enclosure Type
Open frame
Height
30.5 mm
Hold Up Time
20 ms typical
Initial Set Accuracy
±5%
Input Frequency
47-63 Hz
Input Voltage
90-264 VAC
Isolation
3000 VAC Input to Output | 1500 VAC Input to Ground | 500 VAC Output to Ground
Power Density
3.5 W/In3
Start Up Delay
1 s typical
Switching Frequency
60 kHz typical
Total Output Power Operating Max
63 W
Transient Response
4% max. deviation, 500 µs recovery time for a 50% load change
Width
76.2 mm
Features
- Extensive Range
- Factory Set Non-standard Outputs
- Fits 1U Applications
- High Efficiency
- Input Voltage VAC: 90V to 264V
- Low Profile - 1.2” (30.5mm)
- Output Current Max: 6A, 3A, 800mA
- Output Power Max: 63W
- Output Voltage Nominal: 5V, 12V, -12V
- Outputs: 3
- Power Supply Output Type: Adjustable, Fixed
- RoHS Compliant: Yes
- Universal AC Input
Datasheet
Extracted Text
60 Watts xppower.com SDS60 Series • Factory Set Non-standard Outputs • Universal AC Input • Low Profile - 1.2” (30.5mm) • Fits 1U Applications • Single, Dual, Triple & Quad Outputs • Extensive Range • High Efficiency Specification Input General Input Voltage • 90-264 VAC Efficiency • 80% typical, 85% max Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground Input Current • 1.6 A at 115 VAC 500 VAC Output to Ground 1.0 A at 230 VAC Switching Frequency • 60 kHz typical Inrush Current • <15 A at 115 VAC 3 <30 A at 230 VAC Power Density • 3.5 W/In Earth Leakage Current • <0.30 mA at 115 VAC Signals • Green DC OK LED <0.45 mA at 230 VAC MTBF • >100 kHrs per MIL-HDBK-217F Input Protection • 2 A/250 VAC internal fuse Environmental Output Operating Temperature • 0 ˚C to +70 ˚C, derate linearly from 100% Output Voltage • See table load at 50 ˚C to 50% load at 70 ˚C Output Voltage Trim • ±10% on V1 only Cooling • Convection cooled Initial Set Accuracy • Single output models: ±1% Operating Humidity • 5-95% RH, non-condensing Multi output models: ±5% Storage Temperature • -40 ˚C to +85 ˚C Minimum Load • 10% required on V1 & V2 of multi output models to maintain regulation, unit will start up with no load EMC & Safety Start Up Delay • 1 s typical Emissions • EN55022, CISPR22 and FCC Part 15 , Hold Up Time • 20 ms typical level B conducted Line Regulation • ±1% from low line to high line Harmonic Currents • EN61000-3-2 Load Regulation • ±3% typical, 5% max on multi output Voltage Flicker • EN61000-3-3 models (±10% with no load on V1) ESD Immunity • EN61000-4-2, level 2 Perf Criteria B Transient Response • 4% max. deviation, 500 µs recovery time Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria B for a 50% load change EFT/Burst • EN61000-4-4, level 2 Perf Criteria B Ripple & Noise • 1% pk-pk typical Surge • EN61000-4-5, level 3 Perf Criteria B Overvoltage Protection • 112-132%, recycle input to reset Conducted Immunity • EN61000-4-6, 3 V Perf Criteria B Overload Protection • 110-150% with auto recovery Magnetic Field • EN61000-4-8, 1 A/m Perf Criteria B Short Circuit Protection • Trip and restart (Hiccup mode) Dips & Interruptions • EN61000-4-11, 30% 10 ms, Temperature • 0.04% /˚C 60% 100 ms, 100% 5000 ms Coefficient Perf Criteria A, B, B Safety Approvals • EN60950, UL1950, CSA C22,2 No. 234 CE Mark LVD AC-DC AC-DC SDS60 Models and Ratings Maximum Factory Set Output Voltage Output Current Current Range Total Regulation Model Number (1) Output Power Voltage Range 50.0 W 3.3 V 15.1 A 3.0-5.0 VDC 16.6-10.0 A 5% SDS60US03† 55.0 W 5.0 V 11.0 A 5.0-6.0 VDC 11.0-10.0 A 5% SDS60US05† 60.0 W 7.0 V 8.6 A 6.0-9.0 VDC 10.0-6.7 A 4% SDS60US07 63.0 W 9.0 V 7.0 A 9.0-11.0 VDC 6.7-5.4 A 3% SDS60US09† 63.0 W 12.0 V 5.0 A 11.0-13.0 VDC 5.4-4.6 A 3% SDS60US12† 63.0 W 15.0 V 4.2 A 13.0-16.0 VDC 4.6-3.9 A 3% SDS60US15† 63.0 W 19.0 V 3.3 A 16.0-21.0 VDC 3.9-2.8 A 3% SDS60US19 63.0 W 24.0 V 2.6 A 21.0-27.0 VDC 2.8-2.2 A 2% SDS60US24† 63.0 W 30.0 V 2.1 A 27.0-33.0 VDC 2.2-1.8 A 2% SDS60US30 63.0 W 36.0 V 1.8 A 33.0-40.0 VDC 1.8-1.5 A 2% SDS60US36 63.0 W 48.0 V 1.3 A 40.0-50.0 VDC 1.5-1.2 A 2% SDS60US48† Maximum (2,3,4) (2,3,4) (3) (3) Output 1 Output 2 Output 3 Output 4 Model Number Output Power 63.0 W 5.00 VDC / 7.0 A 12.0 VDC / 3.0 A SDS60UD01 48.0 W 3.30 VDC / 7.0 A 5.0 VDC / 5.0 A SDS60UD04 63.0 W 3.30 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A SDS60UT00† 63.0 W 3.30 VDC / 6.0 A 12.0 VDC / 3.0 A -5.0 VDC / 0.8 A SDS60UT01 63.0 W 3.30 VDC / 6.0 A 12.0 VDC / 3.0 A +5.0 VDC / 0.8 A SDS60UT02 53.5 W 3.30 VDC / 5.0 A 5.0 VDC / 5.0 A +12.0 VDC / 1.0 A SDS60UT03† 53.5 W 3.30 VDC / 5.0 A 5.0 VDC / 5.0 A -12.0 VDC / 1.0 A SDS60UT04 63.0 W 5.00 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A SDS60UT05† 63.0 W 5.00 VDC / 6.0 A 12.0 VDC / 3.0 A -5.0 VDC / 0.8 A SDS60UT06† 63.0 W 5.00 VDC / 6.0 A 15.0 VDC / 3.0 A -15.0 VDC / 0.8 A SDS60UT07† 63.0 W 5.00 VDC / 6.0 A 24.0 VDC / 2.0 A -24.0 VDC / 0.5 A SDS60UT08 63.0 W 5.00 VDC / 6.0 A 24.0 VDC / 2.0 A -12.0 VDC / 0.8 A SDS60UT09 63.0 W 5.00 VDC / 6.0 A 24.0 VDC / 2.0 A +12.0 VDC / 0.8 A SDS60UT10† 63.0 W 3.30 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A -5.0 VDC / 0.8 A SDS60UQ00 63.0 W 3.30 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A +5.0 VDC / 0.8 A SDS60UQ01† 63.0 W 5.00 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A -5.0 VDC / 0.8 A SDS60UQ02† 63.0 W 5.00 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A +24.0 VDC / 0.8 A SDS60UQ03† 63.0 W 5.00 VDC / 6.0 A 12.0 VDC / 3.0 A -12.0 VDC / 0.8 A -24.0 VDC / 0.8 A SDS60UQ04 63.0 W 5.00 VDC / 6.0 A 15.0 VDC / 3.0 A -15.0 VDC / 0.8 A -5.0 VDC / 0.8 A SDS60UQ05† 59.3 W 5.00 VDC / 6.0 A 24.0 VDC / 1.8 A -15.0 VDC / 0.1 A +12.0 VDC / 0.8 A SDS60UQ06 Notes 1. If an output voltage within the factory set voltage range is required, a model number will be allocated at the time of order. 2. 10% minimum load required on V1 & V2 of multi output units to maintain regulation of ±5%. Regulation increases to ±10% with no load. 3. Other output combinations are available - contact sales for more information. 4. On multi output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%. 5. For optional U bracket, add suffix ‘B’ to model number. For optional cover, add suffix ‘-C’ to model number. 6. For optional 2 pin AC input use suffix ‘C’ (open frame) or change ‘B’ suffix to ‘D’ (U bracket) † Available from Farnell InOne. See pages 236-237 Mechanical Details All dimensions are in inches (mm) Weight: 0.44 lbs (0.2 kg) approx PIN CONNECTIONS 0.157 (4.0) DIA MOUNTING HOLE (4PL.) Pin Single Output Dual Output Triple Output Quad Output 0.22 (5.6) 1 Output 1 Output 2 Output 2 Output 2 2 Output 1 Output 1 Output 1 Output 1 ADJ 3 Output 1 Output 1 Output 1 Output 1 DC OK LED 4 Return Common Common Common P2 1 5 Return Common Common Common DC AC 6 Return N/C Output 3 Output 3 OUTPUT INPUT 7 Output 4 P1 6 L 8 Output 4 (multi output only) 7 8 N G Notes: 4.56 (115.8) 0.22 (5.6) 1. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 5.00 (127.0) 2. Output connector mates with Molex housing 09-50-3061 or 9-50-3081 and Molex 2878 series crimp terminal. 3. For optional cover kit order part number SDS60 COVER KIT†, to receive unit with cover fitted add suffix ‘C’ to model number. Cover size: 5.46 x 3.55 x 1.55 (140 x 91 x 39.7mm). 4. For mating connectors and cable harness order part numbers: SDS60 CON† - Single, dual and triple output models SDS60Q CON† - Quad output models 0.12 (3.0) max SDS60 LOOM† - Single output models cable harness SDS60DT LOOM† - Dual and triple output models cable harness Tolerance: ±0.02 (0.5) SDS60Q LOOM† - Quad output models cable harness 04/04/05 2.55 (64.8) 1.20 (30.5) 3.00 (76.2)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SDS60UT05 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
XP Power AEH130PS15 Power Supplies - Output Power Max: 130 W Voltage Nom: 15.0 V AEH130 Series
XP Power AEH130PS18 Power Supplies - Output Power Max: 130 W Voltage Nom: 18.0 V AEH130 Series
XP Power AEH130PS36 Power Supplies - Output Power Max: 130 W Voltage Nom: 36.0 V AEH130 Series
XP Power AEH130PS3V3 Power Supplies - Output Power Max: 90 W Voltage Nom: 3.3 V AEH130 Series
XP Power AEH130PS48 Power Supplies - Output Power Max: 130 W Voltage Nom: 48.0 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods