Manufacturers
XP POWER SDS60US12
Description
XP Power SDS60US12 60W AC/DC Switching Power Supply / Open Frame
Part Number
SDS60US12
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
POWER SUPPLY
Datasheet
XP-Power-SDS60US12-60W-AC-DC-Switching-Power-Supply-Open-Frame-datasheet1-1221708569.pdf
146 KiB
Extracted Text
60 Watts xppower.com SDS Series • Single, Dual, Triple & Quad Outputs • Output Voltages from 3.3 V to 48 V • Nonstandard Outputs Available • Industry Standard 3” x 5” Package • Fits 1U Applications • Open Frame, U Channel & Covered Versions • 3 Year Warranty Specification Input General Input Voltage • 90-264 VAC (120-370 VDC) Efficiency • 80% typical, 230 VAC full load Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground Input Current • 1.6 A max at 115 VAC 500 VDC Output to Ground 1.0 A max at 230 VAC Switching Frequency • 60 kHz typical Inrush Current • <15 A at 115 VAC, cold start at 25 °C 3 <30 A at 230 VAC, cold start at 25 °C Power Density • 3.5 W/In Earth Leakage Current • <0.30 mA at 115 VAC Signals • Green DC OK LED <0.75 mA at 240 VAC MTBF • 190 kHrs typical to MIL-HDBK-217F Power Factor • EN61000-3-2, Class A at 25 °C, GB Input Protection • T2 A/250 VAC internal fuse in line Environmental Output Operating Temperature • 0 °C to +70 °C, derate linearly from 100% load at +50 °C to 50% load at +70 °C Output Voltage • See table Cooling • Convection-cooled Output Voltage Trim • ±10% on V1 only (see note 4) Operating Humidity • 5-95% RH, non-condensing Initial Set Accuracy • Single output models: ±1% Multi-output models: ±5% Storage Temperature • -40 °C to +85 °C Minimum Load • 10% required on V1 & V2 of multi-output models to maintain regulation, unit will start up with no load EMC & Safety Start Up Delay • 2 s typical Emissions • EN55022, level B conducted and radiated Hold Up Time • 12 ms min at 110 VAC, 100% load Harmonic Currents • EN61000-3-2, Class A Line Regulation • 1% from low line to high line Voltage Flicker • EN61000-3-3 Load Regulation • 7% max all models 3% typical, see table ESD Immunity • EN61000-4-2, level 2 contact, level 3 air, 10% with no load on V1, for multi output Perf Criteria A models Radiated Immunity • EN61000-4-3, level 2, Perf Criteria A Transient Response • 4% max deviation, recovery to within EFT/Burst • EN61000-4-4, level 2, Perf Criteria A 1% in 4 ms for a 50% load change Surge • EN61000-4-5, installation Class 3, Ripple & Noise • 1% pk-pk typical, 20 MHz bandwidth Perf Criteria A Overvoltage Protection • 112-132% of nominal output voltage on Conducted Immunity • EN61000-4-6, level 2, Perf Criteria A V1 only, recycle input to reset Magnetic Field • EN61000-4-8, 1 A/m, Perf Criteria A Overload Protection • 110-150% of nominal power, with auto recovery Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Short Circuit Protection • Trip & restart (hiccup mode), Perf Criteria A, B, B auto recovery Safety Approvals • EN60950-1, UL60950-1, Temperature • ±0.04%/°C CSA60950-1 per cUL Coefficient ACDC ACDC SDS60 Models and Ratings Factory-Set (5,6) Output Power Output Voltage Output Current Current Range Total Regulation Model Number (1) Voltage Range 50 W 3.3 V 15.1 A 3.0-5.0 VDC 16.6-10.0 A 5% SDS60US03 55 W 5.0 V 11.0 A 5.0-6.0 VDC 11.0-9.1 A 5% SDS60US05 60 W 7.0 V 8.6 A 6.0-8.0 VDC 10.0-7.5 A 4% SDS60US07 63 W 9.0 V 7.0 A 8.0-11.0 VDC 7.8-5.7 A 3% SDS60US09 63 W 12.0 V 5.2 A 11.0-13.0 VDC 5.7-4.8 A 3% SDS60US12 63 W 15.0 V 4.2 A 13.0-16.0 VDC 4.8-3.9 A 3% SDS60US15 63 W 19.0 V 3.3 A 16.0-21.0 VDC 3.9-3.0 A 3% SDS60US19 63 W 24.0 V 2.6 A 21.0-27.0 VDC 3.0-2.3 A 2% SDS60US24 63 W 30.0 V 2.1 A 27.0-33.0 VDC 2.3-1.9 A 2% SDS60US30 63 W 36.0 V 1.7 A 33.0-40.0 VDC 1.9-1.5 A 2% SDS60US36 63 W 48.0 V 1.3 A 40.0-50.0 VDC 1.5-1.2 A 2% SDS60US48 (2,3,4) (2,3,4) (3) (3) (5,6) Output Power Output V1 Output V2 Output V3 Output V4 Model Number 63.0 W +5.0 V/7.0 A +12.0 V/3.0 A SDS60UD01 48.1 W +3.3 V/7.0 A +5.0 V/5.0 A SDS60UD04 63.0 W +3.3 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A SDS60UT00 63.0 W +3.3 V/6.0 A +12.0 V/3.0 A -5.0 V/0.8 A SDS60UT01 63.0 W +3.3 V/6.0 A +12.0 V/3.0 A +5.0 V/0.8 A SDS60UT02 53.5 W +3.3 V/5.0 A +5.0 V/5.0 A +12.0 V/1.0 A SDS60UT03 53.5 W +3.3 V/5.0 A +5.0 V/5.0 A -12.0 V/1.0 A SDS60UT04 63.0 W +5.0 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A SDS60UT05 63.0 W +5.0 V/6.0 A +12.0 V/3.0 A -5.0 V/0.8 A SDS60UT06 63.0 W +5.0 V/6.0 A +15.0 V/3.0 A -15.0 V/0.8 A SDS60UT07 63.0 W +5.0 V/6.0 A +24.0 V/2.0 A -24.0 V/0.5 A SDS60UT08 63.0 W +5.0 V/6.0 A +24.0 V/2.0 A -12.0 V/0.8 A SDS60UT09 63.0 W +5.0 V/6.0 A +24.0 V/2.0 A +12.0 V/0.8 A SDS60UT10 63.0 W +3.3 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A -5.0 V/0.8 A SDS60UQ00 63.0 W +3.3 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A +5.0 V/0.8 A SDS60UQ01 63.0 W +5.0 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A -5.0 V/0.8 A SDS60UQ02 63.0 W +5.0 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A +24.0 V/0.8 A SDS60UQ03 63.0 W +5.0 V/6.0 A +12.0 V/3.0 A -12.0 V/0.8 A -24.0 V/0.8 A SDS60UQ04 63.0 W +5.0 V/6.0 A +15.0 V/3.0 A -15.0 V/0.8 A -5.0 V/0.8 A SDS60UQ05 59.3 W +5.0 V/6.0 A +24.0 V/1.8 A -15.0 V/0.1 A +12.0 V/0.8 A SDS60UQ06 Notes 1. If an output voltage within the factory-set voltage range is required, a model 4. On multi-output units V2 tracks V1, if V1 is adjusted by 5%, V2 changes by 5%. number will be allocated at the time of order. 5. For optional U-bracket, add suffix ‘B’ to model number. 2. 10% minimum load required on V1 & V2 of multi-output units to maintain 6. For optional 2 pin AC input, contact sales for details. regulation of ±5%. Regulation increases to ±10% with no load. 7. To receive unit with cover fitted, add suffix ‘-C’ to model number. 3. Other output combinations are available - contact sales for more information. Mechanical Details PIN CONNECTIONS 0.16 (4.0) DIA MOUNTING HOLE (4PL.) Pin Single Output Dual Output Triple Output Quad Output 0.22 (5.6) 1 Output 1 Output 2 Output 2 Output 2 2 Output 1 Output 1 Output 1 Output 1 ADJ 3 Output 1 Output 1 Output 1 Output 1 DC OK 4 Return Common Common Common LED 5 Return Common Common Common P2 1 DC 6 Return N/C Output 3 Output 3 AC OUTPUT 7 Output 4 INPUT P1 8 Output 4 6 L (multi output only) 7 8 N Notes G 1. All dimensions are in inches (mm) 2. Weight: 0.52 lbs (240 g) approx 3. Tolerance: ±0.02 (0.5) 4.56 (115.8) 4. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 0.22 (5.6) 5.00 (127.0) 5. Output connector mates with Molex housing 09-50-3061 or 9-50-3081 and Molex 2878 series crimp terminal. 6. For optional cover kit order part number SDS60 COVER KIT, to receive unit with cover fitted add suffix ‘-C’ to model number. Cover size: 5.46 x 3.55 x 1.55 (140 x 91 x 39.7mm). 7. For mating connectors and cable harness order part numbers: SDS60 CON KIT - Single, dual and triple output models SDS60Q CON KIT - Quad output models 0.12 (3.0) SDS60 LOOM KIT - Single output models cable harness max SDS60DT LOOM KT - Dual and triple output models cable harness SDS60Q LOOM KIT - Quad output models cable harness 21-Jan-11 2.55 (64.8) 1.20 (30.5) 3.00 (76.2)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SDS60US12 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods