Elite.Parts

Description

XP Power PMP130-12 Power Supply - 130W AC/DC Medical Desktop Power Supply

Part Number

PMP130-12

Price

Request Quote

Manufacturer

XP POWER

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

Derating

Derate from 100% at 50°C; linearly to 50% at 70°C

Earth Leakage Current

90uA max. @ 115VAC, 60Hz; 150uA max @ 230VAC 50Hz

Efficiency

70% min on Vo >12V

EMC Performance (EN60601-1-2:2001)

EN55011:Class B conducted Class B rated; FCC:Class B conducted Class B rated; VCCI:Class B conducted Class B rated; EN61000-3-2:Harmonic distortion, Class A; EN61000-3-3:Line Flicker; EN61000-4-2:EDS, ±8KV air & ±6KV contact; EN61000-4-3:Radiated immunity, 3V/m for 80~2500MHz; EN61000-4-4:Fast transient/burst, ±2KV com; EN61000-4-5:Surge, ±1KV diff, ±2KV com; EN61000-4-6: Conducted immunity, 3Vrms; EN61000-4-8:Magnetic field immunity 3A/m; EN61000-4-11:Voltage dips, 30% reduction for 50ms, 60% reduction for 100ms & >95% reduction for 10ms

Hold-up Time

10 msec min at 115VAC

Input Current

3.0A (rms) for 115VAC; 1.7A (rms) for 230VAC

Input Frequency

47 to 63 Hz

Input Voltage

90 to 132VAC or 180 to 264 VAC (auto ranging)

Inrush Current

15amps @115VAC or 30amps @230VAC at 25°C and cold start

Line Regulation

±0.5% max at full load

Maximum Output Power

130W

MTBF

400,000 hours min at full load at 25°C ambient; calculated per MIL-HDBK217F, excluding DC fan

Output Imax

11A

Output Imin

Output Tol

Output Vnom

12V

Overcurrent Protection

All outputs protected to short circuit conditions

Overvoltage Protection

Provided on output:set at 112 - 132% of it nominal output voltage

Relative Humidity

5% to 95% non-condensing

Ripple & Noise

1% peak to peak max

Switching Frequency

68 KHz ±8KHz

Temperature

Operating:0°C to 70°C; Storage:-40°C to 85°C

Temperature Coefficient

All outputs ±0.04%/°C max

Transient Response

Maximum excursion of 4% or better on all models, recovering to 1% of final value withing 500us ater a 25% step load charge

Withstand Voltage

4000VAC from input to output; 1500VAC from input to ground; 500VAC from output to ground

Datasheet

XP Power=PMP130-12=datasheet1-1783020459.pdf

354 KiB

Download

Extracted Text

100-130 WATT MEDICAL SWITCHING POWER SUPPLIES PROTEK PMP130 SERIES DESCRIPTION (LVD) RoHS The PMP130 series of AC/DC switching power supplies are for 100 to 130 watts of continuous output power, specially designed for medical applications, not for life support equipment. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320 inlet to mate with interchangeable cord for world-wide use. An on/off switch can be added at request. All models meet CISPR 11 and FCC class B emission limits, and comply with UL, CSA, IEC and CE requirements. FEATURES ‧ In compliance with EN61000-3-2, EN61000-3-3 and EN61000-1-1-2 ‧ Optional output connectors ‧ Optional on/off switch ‧ Optional Power Fail Detect (PFD) signal Safety Standard Approvals： ‧ 100% burn-in at full load ‧ Auto-ranging input ‧ Overvoltage protection UL 2601-1,CSA C22.2 NO. 601.1 ‧ Overcurrent protection File NO. E178020 ‧ Thermal protection ‧ Compliant with RoHS requirements TÜV EN60601-1 Certificate No. T9955423 INPUT SPECIFICATIONS Input voltage： 90 to 132VAC or 180 to 264VAC (auto-ranging) Input frequency： 47 to 63Hz Input current： 3.0A (rms) for 115 VAC 1.7A (rms) for 230VAC GENERAL SPECIFICATIONS Earth leakage current： 90uA max. @ 115VAC, 60Hz 150uA max. @ 230VAC, 50Hz Switching frequency： 68 KHz ±8KHz Efficiency： 70% minimum on Vo ≧ 12V 65% minimum on the others Hold-up time： 10 msec minimum at 115VAC OUTPUT SPECIFICATIONS ±0.5% maximum at full load Line regulation： Inrush current： 15amps @115VAC, or 30amps Output voltage/current： See rating chart @230VAC at 25℃ and cold start Total output power： 130 watts maximum 4000VAC from input to output Withstand voltage： Ripple and noise： 1﹪peak to peak maximum 1500VAC from input to ground Provided on output: set at Overvoltage protection： 500VAC from output to ground 112 -132﹪of its nominal MTBF： 400,000 hours minimum at full load output voltage at 25℃ ambient, calculated per All outputs protected to short Overcurrent protection： MIL-HDBK-217F, excluding DC fan. circuit conditions EMC Performance (EN60601-1-2: 2001) All outputs ±0.04﹪/ ℃ Temperature coefficient： EN55011: Class B conducted, Class B radiated maximum FCC: Class B conducted, Class B radiated Transient response： Maximum excursion of 4﹪or VCCI: Class B conducted, Class B radiated better on all models, EN61000-3-2: Harmonic distortion, Class A recovering to 1﹪of final value within 500us after a EN61000-3-3: Line flicker 25﹪ step load change EN61000-4-2: ESD, ± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m for 80~2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. ENVIRONMENTAL SPECIFICATIONS EN61000-4-6: Conducted immunity, 3Vrms Operatingtemperature: 0t℃℃ o +70 Storage temperature： EN61000-4-8: -40℃℃ to +85 Magnetic field immunity, 3A/m Relative humidity： 5﹪ to 95﹪ non-condensing EN61000-4-11: Voltage dips, 30% reduction for Derating： Derate from 100﹪ at +50℃ 500ms, 60% reduction for 100ms linearly to 50﹪ at +70℃ and >95% reduction for 10ms 4-1 1 AUTORANGING INPUT PMP130 MEDICAL SERIES OUTPUT VOLTAGE/CURRENT RATING CHART (1) (2) Output Maximum MODEL Vnom. Imin. Imax. Tol. Output Power PMP130-10 5V 0A 20A 5% 100W PMP130-10-1 7V 0A 14.3A 5% 100W PMP130-11 10V 0A 10A 5% 100W PMP130-12 12V 0A 11A 5% 130W PMP130-13 15V 0A 8.7A 4% 130W PMP130-13-1 18V 0A 7.25A 4% 130W PMP130-14 24V 0A 5.5A 3% 130W PMP130-16 30V 0A 4.4A 3% 130W PMP130-17 36V 0A 3.52A 2% 130W PMP130-18 48V 0A 2.75A 2% 130W NOTES: 1. All models are with built-in fan. 2. Models except PMP130-10, PMP130-10-1 and PMP130-11 are without remote sense. Consult factory for applications requiring remote sense. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 0.80 kgs. (1.76 lbs.) approx. 4. See pages 6-19 to 6-26 for optional output connectors. Add the suffix assigned for a selected connector to a wanted model number, e.g. PMP130-14-HA, for ordering. 5. To order a model with on/off switch, add suffix “S” to the model number, e.g. PMP130-14-HA-S. PIN CHART PIN 1 2 3 4 5 6 7 8 MODEL PMP130-10 PMP130-10-1 OUTPUT OUTPUT OUTPUT RETURN -SENSE RETURN RETURN +SENSE PMP130-11 +V +V +V PMP130-12 PMP130-13 PMP130-13-1 PMP130-14 OUTPUT OUTPUT OUTPUT OUTPUT RETURN RETURN RETURN RETURN PMP130-16 PMP130-17 +V +V +V +V PMP130-18 4-14

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products