PBM25US28 - XP POWER - Elite.Parts

Description

XP Power PBM25US28 Power Supply - XP Power PBM25US28 28 W Max Output Power, 28.0 V nom / 0.0 A min / 1.0 A max Open Frame PCB Medical Power Supply

Part Number

PBM25US28

Price

Request Quote

Manufacturer

XP POWER

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

Cooling

Convection cooled

Earth Leakage Current

90 µA max at 115 VAC 60 Hz; 150 µA max at 230 VAC 50 Hz

Efficiency

68% minimum for 5 V & multi output models, 70% minimum all others

EFT/Burst

EN61000-4-4 Level 3 Perf Criteria A

EMC

EN55011 (CISPR11) Class B & FCC Class B conducted

ESD

EN61000-4-2 Level 2 Perf Criteria A

Hold up Time

10 ms minimum at 110 VAC

Initial Set Accuracy

±1%

Input Current

0.7 A (rms) at 115 VAC, 0.4 A (rms) at 230 VAC

Input Frequency

47-63 Hz

Input Voltage

85-264 VAC

Inrush Current

10 A max at 115 VAC, 25 A max at 230 VAC

Isolation

4000 VAC Input to Output; 1500 VAC Input to Ground; 500 VAC Output to Ground

Line Regulation

±0.5% max at full load

MTBF

500,000 hrs per min MIL-HDBK-217F

Operating Altitude

3000m

Overcurrent Protection

125-200% with auto recovery

Overvoltage Protection

Provided on output 1 only; set at 112-132% of its nominal output voltage

Radiated Immunity

EN61000-4-3 3 V/m Perf Criteria A

Relative Humidity

5-95%, non-condensing

Ripple & Noise

±1% max pk-pk

Safety Approvals

UL2601-1, CSA C22.2 No 601.1, EN60601-1, IEC 601-1

Shock

20 G in 3 directions, 3 times each

Short Circuit Protection

Trip & restart with auto recovery

Size

4.25 x 2.50 x 0.96”; 107.95 x 63.50 x 24.38 mm

Start Up Delay

3 s max

Start Up Rise TIme

12 ms

Surge

EN61000-4-5 Level 3 Perf Criteria A

Switching Frequency

42 KHz ±5 KHz

Temperature

Operating:0°C to +70°C, Temperature derate linearly from 100% load at +50°C to 50% load at +70°C; Storage:-40°C to +85°C

Temperature Coefficient

±0.04%/°C

Transient Response

4% max deviation, 500 µs recovery time for a 25% load change

Vibration

0.15mm over 10-55Hz and 1 octave/min. 3 axes for 30 min

Weight

Single output models:163 g, Multi output models:175 g

Datasheet

XP-Power-PBM25US28-Medical-Open-Frame-Power-Supply-datasheet1-1769878969.pdf

64 KiB

Download

Extracted Text

AC-DC Medical 25 Watts THE XPERTS I N POWER PBM25 Series Small Size 2.50” x 4.25” x 0.96” • • Low Leakage Current • Medical Safety Agency Approvals • Both Line and Neutral Fused • Meets Class B, EN55011 Conducted • Fixed Switching Frequency Specification Input General Input Voltage • 85-264 VAC Efficiency • 68% minimum for 5 V & multi output models, 70% minimum all others Input Frequency • 47-63 Hz Isolation • 4000 VAC Input to Output Input Current • 0.7 A (rms) at 115 VAC, 1500 VAC Input to Ground 0.4 A (rms) at 230 VAC 500 VAC Output to Ground Inrush Current • 10 A max at 115 VAC, Switching Frequency • 42 KHz ±5 KHz 25 A max at 230 VAC MTBF • 500,000 hrs per min MIL-HDBK-217F Earth • 90 µA max at 115 VAC 60 Hz Leakage Current 150 µA max at 230 VAC 50 Hz Size • 4.25 x 2.50 x 0.96” 107.95 x 63.50 x 24.38 mm Output Weight • Single output models 163 g, Output Voltage • 5.1 to 28 VDC, See Table Multi output models 175 g Output Power • 25/28 Watts, See Table Environmental Minimum Load • No minimum for single outputs models See Table for multi outputs models Operating • 0 °C to +70 °C, Temperature derate linearly from 100% load at Start Up Delay • 3 s max +50°C to 50% load at +70 °C Start Up Rise TIme • 12 ms Storage Temperature • -40 °C to +85 °C Hold up Time • 10 ms minimum at 110 VAC Cooling • Convection cooled Initial Set Accuracy • ±1% Relative Humidity • 5-95%, non-condensing Line Regulation • ±0.5% max at full load Operating Altitude • 3000m Total Regulation • See Table Shock • 20 G in 3 directions, 3 times each Transient Response • 4% max deviation, 500 µs recovery time for a 25% load change Vibration • 0.15mm over 10-55Hz and 1 octave/min. 3 axes for 30 min Ripple & Noise • ±1% max pk-pk (See Note 1) Overvoltage • Provided on output 1 only; set at EMC & Safety Protection 112-132% of its nominal output EMC • EN55011 (CISPR11) Class B & FCC voltage Class B conducted Overcurrent • 125-200% with auto recovery ESD • EN61000-4-2 Level 2 Perf Criteria A Protection Radiated Immunity • EN61000-4-3 3 V/m Perf Criteria A Short Circuit • Trip & restart with auto recovery Protection EFT/Burst • EN61000-4-4 Level 3 Perf Criteria A Temperature •±0.04%/°C Surge • EN61000-4-5 Level 3 Perf Criteria A Coefficient Safety Approvals • UL2601-1, CSA C22.2 No 601.1, EN60601-1, IEC 601-1 • • www.xp-medical.com sales@xp-medical.com OUTPUT VOLTAGE & CURRENT RATINGS PBM25 Output Power Output 1 Output 2 Output 3 Model (2) (2) (2) Maximum Vnom Imin Imax Reg. Vnom Imin Imax Reg. Vnom Imin Imax Reg. Number 28 W 5.1 V 0.0 A 5.5 A 2% PBM25US05 28 W 12.0 V 0.0 A 2.3 A 1% PBM25US12* 28 W 15.0 V 0.0 A 1.9 A 1% PBM25US15* 28 W 24.0 V 0.0 A 1.2 A 1% PBM25US24* 28 W 28.0 V 0.0 A 1.0 A 1% PBM25US28* 25 W 5.1 V 0.4 A 2.5 A 3% +12 V 0.2 A 1.5 A 5% PBM25UD01* 25 W 5.1 V 0.4 A 2.5 A 3% +24 V 0.1 A 0.8 A 5% PBM25UD02* 25 W 5.1 V 0.4 A 2.5 A 3% +12 V 0.2 A 1.5 A 5% -12 V 0.05 A 0.2 A 4% PBM25UT01* 25 W 5.1 V 0.4 A 2.5 A 3% +15 V 0.1 A 1.0 A 5% -15 V 0.05 A 0.2 A 4% PBM25UT02* 25 W 5.1 V 0.4 A 2.5 A 3% +24 V 0.1 A 0.8 A 5% -12 V 0.05 A 0.2 A 4% PBM25UT03* Notes 1. Ripple and noise measured with 20 MHz bandwidth with 10 µF electrolytic in parallel with 0.1 µF ceramic. 2. Regulation includes line and load regulation and set point accuracy. All multiple output models may be operated at no-load, but output regulation will increase to 10% on outputs V2 & V3. * Also available from Farnell InOne, see pages 350 & 351. • Mechanical Details - Single Output Models PIN CONNECTIONS Pin Function 1 Return 2 Return 3 Output 1 4 Output 1 Notes: 1. Dimensions shown in inches (mm). 2. Tolerance 0.03 (0.76) maximum. 3. Input connector P1 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector P2 mates with Molex housing 09-50-3041 and Molex 2878 series crimp terminal. 5. Weight 163 g. 6. Covers available, order part number PBM25 COVER*, or add suffix ‘-C’ to have cover fitted (78.8 x 12.0 x 34.8 mm). 7. Mating connector kit available, order part number PBM25 CONKT-S*. Mechanical Details - Multi Output Models PIN CONNECTIONS Pin Dual Output Triple Output 1 Output 2 Output 2 2 Output 1 Output 1 3 Output 1 Output 1 4 Common Return Common Return 5 Common Return Common Return 6 No Connection Output 3 Notes: 1. Dimensions shown in inches (mm). 2. Tolerance 0.03 (0.76) maximum. 3. Input connector P1 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector P2 mates with Molex housing 09-50-3061 and Molex 2878 series crimp terminal. 5. Weight 175 g. 6. Covers available, order part number PBM25 COVER*, or add suffix ‘-C’ to have cover fitted (78.8 x 120.0 x 34.8 mm). 7. Mating connector kit available, order part number PBM25 CONKT-D/T*. www.xp-medical.com sales@xp-medical.com Rev 3.1

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products