Manufacturers
XP POWER PBM25
Description
XP Power PBM25 Series 25 Watts Open Frame PCB Medical Power Supplies
Part Number
PBM25
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
PRODUCTS - P
Datasheet
Extracted Text
AC-DC Medical 25 Watts THE XPERTS I N POWER PBM25 Series Small Size 2.50” x 4.25” x 0.96” • • Low Leakage Current • Medical Safety Agency Approvals • Both Line and Neutral Fused • Meets Class B, EN55011 Conducted • Fixed Switching Frequency Specification Input General Input Voltage • 85-264 VAC Efficiency • 68% minimum for 5 V & multi output models, 70% minimum all others Input Frequency • 47-63 Hz Isolation • 4000 VAC Input to Output Input Current • 0.7 A (rms) at 115 VAC, 1500 VAC Input to Ground 0.4 A (rms) at 230 VAC 500 VAC Output to Ground Inrush Current • 10 A max at 115 VAC, Switching Frequency • 42 KHz ±5 KHz 25 A max at 230 VAC MTBF • 500,000 hrs per min MIL-HDBK-217F Earth • 90 µA max at 115 VAC 60 Hz Leakage Current 150 µA max at 230 VAC 50 Hz Size • 4.25 x 2.50 x 0.96” 107.95 x 63.50 x 24.38 mm Output Weight • Single output models 163 g, Output Voltage • 5.1 to 28 VDC, See Table Multi output models 175 g Output Power • 25/28 Watts, See Table Environmental Minimum Load • No minimum for single outputs models See Table for multi outputs models Operating • 0 °C to +70 °C, Temperature derate linearly from 100% load at Start Up Delay • 3 s max +50°C to 50% load at +70 °C Start Up Rise TIme • 12 ms Storage Temperature • -40 °C to +85 °C Hold up Time • 10 ms minimum at 110 VAC Cooling • Convection cooled Initial Set Accuracy • ±1% Relative Humidity • 5-95%, non-condensing Line Regulation • ±0.5% max at full load Operating Altitude • 3000m Total Regulation • See Table Shock • 20 G in 3 directions, 3 times each Transient Response • 4% max deviation, 500 µs recovery time for a 25% load change Vibration • 0.15mm over 10-55Hz and 1 octave/min. 3 axes for 30 min Ripple & Noise • ±1% max pk-pk (See Note 1) Overvoltage • Provided on output 1 only; set at EMC & Safety Protection 112-132% of its nominal output EMC • EN55011 (CISPR11) Class B & FCC voltage Class B conducted Overcurrent • 125-200% with auto recovery ESD • EN61000-4-2 Level 2 Perf Criteria A Protection Radiated Immunity • EN61000-4-3 3 V/m Perf Criteria A Short Circuit • Trip & restart with auto recovery Protection EFT/Burst • EN61000-4-4 Level 3 Perf Criteria A Temperature •±0.04%/°C Surge • EN61000-4-5 Level 3 Perf Criteria A Coefficient Safety Approvals • UL2601-1, CSA C22.2 No 601.1, EN60601-1, IEC 601-1 • • www.xp-medical.com sales@xp-medical.com OUTPUT VOLTAGE & CURRENT RATINGS PBM25 Output Power Output 1 Output 2 Output 3 Model (2) (2) (2) Maximum Vnom Imin Imax Reg. Vnom Imin Imax Reg. Vnom Imin Imax Reg. Number 28 W 5.1 V 0.0 A 5.5 A 2% PBM25US05 28 W 12.0 V 0.0 A 2.3 A 1% PBM25US12* 28 W 15.0 V 0.0 A 1.9 A 1% PBM25US15* 28 W 24.0 V 0.0 A 1.2 A 1% PBM25US24* 28 W 28.0 V 0.0 A 1.0 A 1% PBM25US28* 25 W 5.1 V 0.4 A 2.5 A 3% +12 V 0.2 A 1.5 A 5% PBM25UD01* 25 W 5.1 V 0.4 A 2.5 A 3% +24 V 0.1 A 0.8 A 5% PBM25UD02* 25 W 5.1 V 0.4 A 2.5 A 3% +12 V 0.2 A 1.5 A 5% -12 V 0.05 A 0.2 A 4% PBM25UT01* 25 W 5.1 V 0.4 A 2.5 A 3% +15 V 0.1 A 1.0 A 5% -15 V 0.05 A 0.2 A 4% PBM25UT02* 25 W 5.1 V 0.4 A 2.5 A 3% +24 V 0.1 A 0.8 A 5% -12 V 0.05 A 0.2 A 4% PBM25UT03* Notes 1. Ripple and noise measured with 20 MHz bandwidth with 10 µF electrolytic in parallel with 0.1 µF ceramic. 2. Regulation includes line and load regulation and set point accuracy. All multiple output models may be operated at no-load, but output regulation will increase to 10% on outputs V2 & V3. * Also available from Farnell InOne, see pages 350 & 351. • Mechanical Details - Single Output Models PIN CONNECTIONS Pin Function 1 Return 2 Return 3 Output 1 4 Output 1 Notes: 1. Dimensions shown in inches (mm). 2. Tolerance 0.03 (0.76) maximum. 3. Input connector P1 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector P2 mates with Molex housing 09-50-3041 and Molex 2878 series crimp terminal. 5. Weight 163 g. 6. Covers available, order part number PBM25 COVER*, or add suffix ‘-C’ to have cover fitted (78.8 x 12.0 x 34.8 mm). 7. Mating connector kit available, order part number PBM25 CONKT-S*. Mechanical Details - Multi Output Models PIN CONNECTIONS Pin Dual Output Triple Output 1 Output 2 Output 2 2 Output 1 Output 1 3 Output 1 Output 1 4 Common Return Common Return 5 Common Return Common Return 6 No Connection Output 3 Notes: 1. Dimensions shown in inches (mm). 2. Tolerance 0.03 (0.76) maximum. 3. Input connector P1 mates with Molex housing 09-50-3031 and Molex 2878 series crimp terminal. 4. Output connector P2 mates with Molex housing 09-50-3061 and Molex 2878 series crimp terminal. 5. Weight 175 g. 6. Covers available, order part number PBM25 COVER*, or add suffix ‘-C’ to have cover fitted (78.8 x 120.0 x 34.8 mm). 7. Mating connector kit available, order part number PBM25 CONKT-D/T*. www.xp-medical.com sales@xp-medical.com Rev 3.1
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PBM25 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods