DatasheetDirect.com Your dedicated source for free downloadable datasheets. ƒ Over one million datasheets ƒ Optimized search function ƒ Rapid quote option ƒ Free unlimited downloads Visit www.datasheetdirect.com to get your free datasheets. This datasheet has been downloaded by http://www.datasheetdirect.com/ AC/DC U-Channel 150 Watts XPiQ inc. Intelligent Design Quality Product HUL150 Series • Meets EN61000-3-2, -3 • Meets 1U, Low Profile Requirements • Quad Outputs With 3.3V and 5V • 100W with Convection Cooling • International Safety Approvals • CE Marked - LVD Specification Input General Input Voltage • 90-132 VAC, 180 to 264 VAC Line Regulation • ±1% maximum at full load (auto-ranging) Inrush Current • 35 A at 115 VAC or 70 A at 230 VAC Input Frequency • 47-63 Hz at +25 °C cold start Input Current • 5.0 A max 115 VAC Withstand Voltage • 3000 VAC from input to output 2.5 A at 230 VAC 1500 VAC from input to ground Leakage Current • 3.5 mA at 230 VAC Switching Frequency • 42 kHz Output Environmental Output Voltage • See Tables Operating • 0 °C to +70 °C Output Current • See Tables Temperature Derate linearly from 100% load at Cooling 50 °C to 50% load at 70 °C Hold Up Time • 20 ms min at 125 VAC/80% load Storage • -20 °C to +85 °C Ripple & Noise • 1% pk-pk max Temperature Overvoltage • Set at 110-135% of maximum Relative Humidity • 5% to 90% non condensing Protection output voltage (on output #1 only) MTBF • 100,000 hrs (MIL-HDBK-217D) Overcurrent • All outputs protected to short Protection: circuit conditions EMC & Safety Temperature • ±0.1%/°C maximum Safety Approvals • UL1950, CSA C22.2 No. 234 Coefficient: IEC 950 (EN60950) Transient Response • Maximum excursion of 5% recovering EMI • In compliance with CISPR22 to 1% of final value in less than (EN55022), Class B and 500 µs after a 50% step load FCC Class B change • • PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com 17 OUTPUT VOLTAGE & CURRENT RATINGS HUL150 Output #1 Output #2 Output #3 Output #4 Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number +5 V 2.0 A 15 A 5% +3.3 V 0 A 15 A 5% +12 V 0.5 A 3 A 5% -12 V 0 A 1 A 3% HUL150-42-3 +5 V 2.0 A 15 A 5% +3.3 V 0 A 15 A 5% +15 V 0.5 A 3 A +10/-5% -15 V 0 A 1 A 3% HUL150-46-3 +5 V 2.0 A 15 A 5% +3.3 V 0 A 15 A 5% +12 V 0.5 A 3 A 5% -5 V 0 A 1 A 3% HUL150-40-3 +5 V 2.0 A 15 A 5% +3.3 V 0 A 15 A 5% +24 V 0.5 A 2 A 5% -12 V 0 A 1 A 3% HUL150-45-3 Notes 1. Use part number UL150-XX-X for product without harmonic correction. Example: UL150-42-3. 2. Total output power for HUL150 is 150 W with 20 CFM forced air cooling, 100 W convection cooled. 3. Total combined output power for the +5 V and +3.3 V not to exceed 100 W with 20 CFM or 70 W with no air. Pin Chart 12 3 4 5 6 7 8 9 10 11 12 3.3V Output Output Output Output Output Output Power Return Return Return Return +Sense #2 #2 #1 #1 #3 #4 Good 13 14 15 16 17 18 19 20 21 22 23 24 3.3V Output Output Output Output Output Output Return Return Return Return Return -Sense #2 #2 #1 #1 #3 #4 Mechanical Details NOTES: 1. Dimensions shown in mm (inches). 2. Tolerance 0.5mm [0.02] maximum. 3. Input connector P1 mates with Molex housing 09-91-0500 and Molex 2478/2578/8818 Series crimp terminal. 4. Output connector P3 mates with Molex housing 39-01-2240 and Molex 44476 Series crimp terminal. 5. P2 Connector is JST XHP-2 for an external 12V fan. 6. Weight: 600 grams approx. PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com 18 •