Manufacturers
XP POWER AEH130PS12
Description
XP Power AEH130PS12 Power Supplies - Output Power Max: 130 W Voltage Nom: 12.0 V AEH130 Series
Part Number
AEH130PS12
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
POWER SUPPLY
Features
- 0 °C to +70 °C Operating Temperature
- Efficiency up to 80%
- Non-standard Connectors Available
- Non-standard Outputs Available
- Output Voltages from 2.5 V to 48 V
- Single & Multiple Output Versions
- Universal Input
Datasheet
Extracted Text
45-130 Watts xppower.com AEH Series • Output Voltages from 2.5 V to 48 V • Non-standard Outputs Available • Universal Input • Single & Multiple Output Versions • 0 °C to +70 °C Operating Temperature • Efficiency up to 80% • Non-standard Connectors Available Specification Input General Input Voltage • 90-264 VAC Efficiency • Up to 80% Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground Input Current • 1.5/0.7 A for AEH45, at 115/230 VAC 500 VAC Output to Ground 1.9/1.5 A for AEH80, at 115/230 VAC 3.2/1.7 A for AEH130, at 115/230 VAC Switching Frequency • 67-83 kHz for AEH45 58 kHz typical for AEH80 Inrush Current • AEH45 & 80: 30 A max at 230 VAC 53-76 kHz for AEH130 AEH130: 60 A max at 230 VAC cold start MTBF • 100 kHrs per MIL-HDBK-217F Power Factor • EN61000-3-2 class A Environmental Earth Leakage Current • <0.5 mA max at 115 VAC/60 Hz <0.75 mA max at 230 VAC/50 Hz Operating Temperature • 0 °C to +70 °C, derate linearly from 100% load at +40 °C to 50% load at +70 °C Output Operating Humidity • 5-95% RH, non-condensing Output Voltage • See tables. Factory set non-standard Storage Temperature • -40 °C to +85 °C voltages available - contact sales Vibration • 2 g on 3 axes Initial Set Accuracy •5% EMC & Safety Start Up Delay • 2 s max Hold Up Time • 16 ms min (>50 ms AEH130) Emissions • EN55022 level B, conducted and radiated Line Regulation • See note 2 Harmonic Currents • EN61000-3-2, Class A Load Regulation • See note 2 Voltage Flicker • EN61000-3-2 Transient Response • 4% max deviation, recovery to within ESD Immunity • EN61000-4-2, level 2 Perf Criteria A 1% in 4 ms for a 50% load change Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A Ripple & Noise • 2% pk-pk for outputs ≤3.3 V EFT/Burst • EN61000-4-4, level 2 Perf Criteria A 1% pk-pk for all other outputs Surge • EN61000-4-5, level 3 Perf Criteria A 20 MHz BW Conducted Immunity • EN61000-4-6, level 2 Perf Criteria A Overvoltage Protection • 112-132% Vnom, auto reset Dips & Interruptions • EN61000-4-11 30% 10 ms, Overload Protection • Output 1 only 110-150% of nominal 60% 100 ms, 100% 5000 ms Temperature • ±0.04%/°C max Perf Criteria A, B, B Coefficient Safety Approvals • EN60950-1, UL60950-1, CSA C22.2 No. 950 per cUL, CE Mark AC-DC AC-DC AEH45 Models and Ratings (1,2) (1,2) (1,2) Output 1 Output 2 Output 3 Output Model Power Current Current Current Voltage Voltage Voltage Number Max Nom. Nom. Nom. Min Max Min Max Min Max 20 W 2.5 V 0.0 A 8.0 A AEH45US02 26 W 3.3 V 0.0 A 8.0 A AEH45US03 40 W 5.0 V 0.0 A 8.0 A AEH45US05 42 W 7.0 V 0.0 A 6.0 A AEH45US07 45 W 10.0 V 0.0 A 4.5 A AEH45US10 44 W 12.0 V 0.0 A 3.7 A AEH45US12 44 W 15.0 V 0.0 A 2.9 A AEH45US15 44 W 18.0 V 0.0 A 2.4 A AEH45US18 48 W 24.0 V 0.0 A 2.0 A AEH45US24 50 W 30.0 V 0.0 A 1.7 A AEH45US30 50 W 36.0 V 0.0 A 1.4 A AEH45US36 50 W 48.0 V 0.0 A 1.0 A AEH45US48 42 W +12.0 V 0.5 A 3.0 A -12.0 V 0.2 A 1.0 A AEH45UM21 42 W +15.0 V 0.5 A 2.0 A -15.0 V 0.2 A 1.0 A AEH45UM22 42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A AEH45UM23 42 W +5.0 V 0.5 A 5.0 A +15.0 V 0.2 A 1.5 A AEH45UM26 42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A AEH45UM25 42 W +5.0 V 0.5 A 5.0 A -24.0 V 0.1 A 1.0 A AEH45UM27 27 W +3.3 V 0.5 A 5.0 A +5.0 V 0.1 A 2.0 A AEH45UM28 40 W +3.3 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A AEH45UM29 42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -5.0 V 0.0 A 0.8 A AEH45UM33 42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH45UM31 42 W +5.0 V 0.5 A 5.0 A +15.0 V 0.2 A 2.0 A -15.0 V 0.0 A 0.8 A AEH45UM32 40 W +3.3 V 0.5 A 5.2 A +12.0 V 0.2 A 2.0 A -5.0 V 0.0 A 0.8 A AEH45UM34 42 W +3.3 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH45UM35 42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A -12.0 V 0.0 A 0.8 A AEH45UM38 42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A -24.0 V 0.0 A 0.5 A AEH45UM39 Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation including initial set accuracy, line and load regulation is typically 3% for output 1 and 5% for auxiliaries. Mechanical Details AC Input IEC 320-C14 Inlet 3 5 1.69 2 (43.0) 4 1 DC OUTPUT 2.99 (76.0) 5.75 (146.0) ±1.0 PIN CONNECTIONS DUAL TRIPLE Pin SINGLE Shell GND GND GND 1 Common Common Common 2 Common Common Common 3 Output Output 1 Output 1 4 Common Common Output 3 DC Output 5 Output Output 2 Output 2 5 Pin Plug Notes 1. Dimensions shown in inches (mm). 5. Weight 0.9-1.1 lb (400-500 g) approx. 2. Tolerance 0.02 (0.5) max. 6. For UK mains lead order part: UK-MAINS-IEC. 3. Output cable length is 72” (1830mm) approx. For European mains lead order part: EU-MAINS-IEC. 4. Optional output connectors available. Contact sales office. 7. For mating DIN connector, use standard 5 pin 180º socket. AEH80 Models and Ratings (1,2) (1,2) (1,2) Output 1 Output 2 Output 3 Output Model Power Current Current Current Voltage Voltage Voltage Number Max Nom. Nom. Nom. Min Max Min Max Min Max 50 W 3.3 V 0.0 A 15.1 A AEH80US03 65 W 5.0 V 0.0 A 13.0 A AEH80US05 70 W 7.0 V 0.0 A 9.9 A AEH80US07 75 W 10.0 V 0.0 A 7.5 A AEH80US10 80 W 12.0 V 0.0 A 6.6 A AEH80US12 80 W 15.0 V 0.0 A 5.3 A AEH80US15 80 W 18.0 V 0.0 A 4.4 A AEH80US18 80 W 24.0 V 0.0 A 3.3 A AEH80US24 80 W 30.0 V 0.0 A 2.6 A AEH80US30 80 W 36.0 V 0.0 A 2.2 A AEH80US36 80 W 48.0 V 0.0 A 1.6 A AEH80US48 60 W +5.0 V 0.7 A 7.0 A +12.0 V 0.3 A 3.0 A AEH80UM23 60 W +5.0 V 1.4 A 7.0 A +15.0 V 0.6 A 3.0 A AEH80UM26 60 W +5.0 V 1.4 A 7.0 A +24.0 V 0.2 A 2.0 A AEH80UM25 60 W +5.0 V 1.4 A 7.0 A -24.0 V 0.2 A 2.0 A AEH80UM29 38 W +3.3 V 1.4 A 7.0 A +5.0 V 0.6 A 3.0 A AEH80UM28 56 W +3.3 V 0.7 A 7.0 A +12.0 V 0.5 A 3.0 A AEH80UM27 65 W +5.0 V 0.6 A 6.0 A +12.0 V 0.3 A 3.0 A -5.0 V 0.0 A 0.8 A AEH80UM33 65 W +5.0 V 0.6 A 6.0 A +12.0 V 0.3 A 3.0 A -12.0 V 0.0 A 0.8 A AEH80UM31 65 W +5.0 V 0.6 A 6.0 A +15.0 V 0.3 A 2.1 A -15.0 V 0.0 A 0.8 A AEH80UM32 63 W +3.3 V 0.7 A 7.0 A +12.0 V 0.6 A 3.0 A -5.0 V 0.0 A 0.8 A AEH80UM34 65 W +3.3 V 1.4 A 7.0 A +12.0 V 0.6 A 3.0 A -12.0 V 0.1 A 0.8 A AEH80UM37 65 W +5.0 V 0.7 A 7.0 A +24.0 V 0.2 A 2.0 A -24.0 V 0.0 A 0.8 A AEH80UM38 65 W +5.0 V 0.6 A 6.0 A +24.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH80UM39 Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation including initial set accuracy, line and load regulation is typically 3% for output 1 and 5% for auxiliaries. Mechanical Details AC Input IEC 320-C14 Inlet 1.75 (44.5) 8 6 7 1 3 3.09 (78.5) 5 4 6.61 (167.9) ±1.0 2 DC Output 8 Pin Plug 3 5 2 4 1 DC OUTPUT DC Output 5 Pin Plug PIN CONNECTIONS SINGLES Pin DUAL TRIPLE 03, 05 V 07-48 V Notes Shell GND GND GND GND 1. Dimensions shown in inches (mm). 1 Common Common Common Common 2. Tolerance 0.02 (0.5) max. 2 Common Common Output 2 Output 3 3. Output cable length is 48” (1220mm) approx. 3 Output Output Output 1 Output 1 4. Optional output connectors available. Contact sales office. 4 Common Common Output 2 Output 2 5. Weight 0.9-1.1 lb (400-500 g) approx. 5 Output Output Output 1 Output 2 6. For UK mains lead order part: UK-MAINS-IEC, 6 Common Common Common For European mains lead order part: EU-MAINS-IEC. 7 Output Output 1 Output 1 7. Optional ON/OFF switch. Add suffix ‘-S’. 8 Output Common Output 3 AC-DC AC-DC AEH130 Models and Ratings (1,2) (1,2) Output 1 Output 2 Output Model Power Current Current Voltage Total Voltage Total Number Max Nom. Min Max Regulation Nom. Min Max Regulation 90 W 3.3 V 0.0 A 27.2 A 7% AEH130PS3V3 115 W 5.0 V 0.0 A 23.0 A 7% AEH130PS05 130 W 7.0 V 0.0 A 18.5 A 7% AEH130PS07 130 W 9.0 V 0.0 A 14.4 A 5% AEH130PS09 130 W 12.0 V 0.0 A 10.8 A 5% AEH130PS12 130 W 15.0 V 0.0 A 8.6 A 5% AEH130PS15 130 W 18.0 V 0.0 A 7.2 A 5% AEH130PS18 130 W 24.0 V 0.0 A 5.4 A 5% AEH130PS24 130 W 28.0 V 0.0 A 4.6 A 5% AEH130PS28 130 W 36.0 V 0.0 A 3.6 A 5% AEH130PS36 130 W 48.0 V 0.0 A 2.7 A 3% AEH130PS48 130 W 54.0 V 0.0 A 2.4 A 3% AEH130PS54 90 W +3.3 V 4.0 A 20.0 A 10% +12.0 V 0.2 A 2.0 A 5% AEH130PD01 120 W +5.0 V 4.0 A 20.0 A 7% +12.0 V 0.2 A 2.0 A 5% AEH130PD02 120 W +5.0 V 4.0 A 20.0 A 7% +15.0 V 0.2 A 2.0 A 5% AEH130PD03 120 W +5.0 V 4.0 A 20.0 A 7% +24.0 V 0.2 A 2.0 A 5% AEH130PD04 Notes 1. Factory-set non-standard outputs available in single output versions. 2. Total regulation includes initial set accuracy, line and load regulation. Mechanical Details PIN CONNECTIONS DUAL Pin SINGLE Shell GND GND 8 6 7 1 Common Common 1 3 2 Common Output 2 3 Output Output 1 5 4 2 4 Common Output 2 5 Output Output 1 6 Common Common 7 Output Output 1 8 Output Common AC Input IEC 320-C14 Inlet 0.85 (21.5) 1.14 (29.0) 3.46 (88.0) 7.71 (196.0) ±1.0 Notes 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) max. 3. Output cable length is 48” (1220mm) approx. 4. Optional output connectors available. Contact sales office. 5. Weight 1.9 lb (860 g) approx. 6. For UK mains lead order part: UK-MAINS-IEC, For European mains lead order part: EU-MAINS-IEC. 17-Apr-07
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the AEH130PS12 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods