Manufacturers
XANTREX XFR60-20
Description
Xantrex XRF60-20 Power Supply - DC, Programmable, 0 to 60 Vdc, 0 to 20 A
Part Number
XFR60-20
Price
Request Quote
Manufacturer
XANTREX
Lead Time
Request Quote
Category
PRODUCTS - X
Specifications
Drift (8 hours)
Voltage (0.05% of Vmax): 30mV
Efficiency
86%
Line Regulation
Voltage: 2.5mV
Load Regulation
Voltage: 3mV
Meter accuracy
Voltage (0.5% of Vmax + 1 count): 0.7V
Output Current
0-60 A
Output Noise (0-20 mHz)
Voltage (p-p): 55 mV
Output Power
1200 W
Output Ripple (rms)
Voltage: 6mV
Output Voltage
0-20 V
OVP Adjustment Range(5% to 110% of Vmax)
3-66 V
Program Slew Rate
Rise Time: 100ms
Temperature Coefficient
Voltage (0.02% of Vmax/°C): 12mV
Features
- Constant voltage or constant current operation
- LabVIEW and LabWindows drivers
- Remote sense with 5 V line loss compensation
- Simultaneous front panel display of output voltage and current
- Zero voltage “Soft Switching”
Datasheet
Extracted Text
XFR 1.2 kW XFR 1.2 kW Programmable DC Power Supply with Zero Voltage “Soft Switching” Provides 1.2 kW of DC Power for OEM Applications Xantrex Technology Inc. Headquarters The Xantrex XFR 1.2 kW programmable DC power supply provides clean, reliable power for research, 8999 Nelson Way product development, production test applications, and OEM applications where high power and a Burnaby, British Columbia wide adjustment of output voltage or current are required in a 19-inch rack package. The XFR 1.2 kW is Canada V5A 4B5 packaged in a 1.75-inch (1 U) high chassis and offers twenty percent more power than any competitive 800 670 0707 Toll Free product in a similar package. 604 420 1591 Fax The supplies have excellent thermal management allowing for units to be stacked in rack mounts 5916 195th Street NE without any ventilation space required between each unit. They also offer high reliability with Arlington, Washington zero voltage, or “soft switching”, which virtually eliminates switching transients for high efficiency, USA 98223 decreased heat generation, and reduced stress on the switching transistors. 800 446 6180 Toll Free 360 925 5144 Fax Product Features Zero voltage “Soft Switching” Simultaneous front panel display of output voltage and current Constant voltage or constant current operation Remote sense with 5 V line loss compensation LabVIEW® and LabWindows® drivers Protection Features Over voltage protection Over temperature protection Options Isolated analog control (ISOL) RS-232 interface card GPIB interface card GPIB-multichannel © 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a trademark of Xantrex International. PN DS20040608R03_xfr 1.2 Printed in Canada www.xantrex.com XFR 1.2 kW XFR 1.2 kW Programmable DC Power Supply with Zero Voltage “Soft Switching” 1 Electrical Specifi cations Models 6-200 7.5-140 12-100 20-60 35-35 40-30 60-20 100-12 150-8 300-4 600-2 Output Ratings Output Voltage 0-6 V 0-7.5 V 0-12 V 0-20 V 0-35 V 0-40 V 0-60 V 0-100 V 0-150 V 0-300 V 0-600 V 8 Output Current 0-200 A 0-140 A 0-100 A 0-60 A 0-35 A 0-30 A 0-20 A 0-12 A 0-8 A 0-4 A 0-2 A Output Power 1200 W 1050 W 1200 W 1200 W 1225 W 1200 W 1200 W 1200 W 1200 W 1200 W 1200 W 2 Line Regulation Voltage 2.5 mV 2.5 mV 2.5 mV 2.5 mV 2.5 mV 2.5 mV 2.5 mV 2.5 mV 2.5 mV 5 mV 10 mV Current 20 mA 10 mA 10 mA 4 mA 4 mA 4 mA 4 mA 2 mA 2 mA 1 mA 1 mA 3 Load Regulation Voltage 3 mV 3 mV 3 mV 3 mV 3 mV 3 mV 3 mV 3 mV 5 mV 10 mV 60 mV Current 20 mA 10 mA 8 mA 8 mA 5 mA 5 mA 9 mA 4 mA 4 mA 4 mA 4 mA Meter accuracy Voltage (0.5% of Vmax + 1 count) 0.07 V 0.09 V 0.13 V 0.3 V 0.4 V 0.5 V 0.7 V 1.1 V 1.6 V 4 V 7 V Current (0.5% of Imax + 1 count) 2.5 A 1.5 A 1.1 A 0.7 A 0.45 A 0.4 A 0.3 A 0.13 A 0.09 A 0.05 A 0.03 A Output Noise (0-20 mHz) Voltage (p-p) 50 mV 50 mV 55 mV 50 mV 50 mV 50 mV 55 mV 55 mV 60 mV 115 mV 190 mV Output Ripple (rms) Voltage 5 mV 5 mV 5 mV 8 mV 8 mV 8 mV 6 mV 8 mV 13 mV 22 mV 50 mV Current 530 mA 250 mA 250 mA 300 mA 60 mA 60 mA 15 mA 12 mA 6 mA 3 mA 1 mA 4 Drift (8 hours) Voltage (0.05% of Vmax) 3 mV 3.75 mV 6 mV 10 mV 17.5 mV 20 mV 30 mV 50 mV 75 mV 150 mV 300 mV Current (0.05% of Imax) 200 mA 70 mA 50 mA 30 mA 17.5 mA 15 mA 10 mA 6 mA 4 mA 2 mA 1 mA 5 Temperature Coeffi cient Voltage (0.02% of Vmax/°C) 1.2 mV 1.5 mV 2.4 mV 4 mV 7 mV 8 mV 12 mV 20 mV 30 mV 60 mV 120 mV Current (0.03% of Imax/°C) 60 mA 42 mA 30 mA 18 mA 10.5 mA 9 mA 6 mA 3.6 mA 2.4 mA 1.2 mA 0.6 mA 6 Program Slew Rate Rise Time 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms 170 ms 170 ms 170 ms 170 ms Fall Time 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms 100 ms 170 ms 170 ms 170 ms 170 ms OVP Adjustment Range 0.3-6.6 V 0.375-8.25 V 0.6-13.2 V 1-22 V 1.75-38.5 V 2-44 V 3-66 V 5-110 V 7.5-165 V 15-330 V 30-660 V (5% to 110% of (5% to 110% of Vmax) Vmax) 7 Effi ciency: 75% 78% 81% 81% 83% 83% 86% 84% 84% 85% 85% 1. Specifi cations indicate typical performance at 25° C ±5°C, nominal line input of 120 VAC. 2. For input voltage variation over the AC input voltage range, with constant rated load. 3. For 0-100% load variation, with constant nominal line voltage. 4. Maximum drift over 8 hours with constant line, load, and temperature, after 30-minute warm-up. 5. Change in output per °C change in ambient temperature, with constant line and load. 6. Measured with stepped 0-10 V analog programming source and a resistive load. 7. Typical effi ciency at 100 VAC input and rated output power. 8. Derate output current on 6 V model by 1.5 A per °C for operating temperatures 30-50°C. General Specifi cations Operational AC Input Voltage 85-130 VAC or 190-264 VAC, 1 phase (17 A @ 120 VAC; 8.8 A @ 230 VAC typical), 47-63 Hz. Automatic range detect. Switching Frequency 6 V to 40 V models: nominal 78 kHz (156 kHz output ripple); 60 V to 600 V models: nominal 62.5 kHz (125 kHz output ripple). Remote Analog Programming Voltage and current programming inputs (source must be isolated): 0-5 K, 0-10 k resistances; 0-5 V, 0-10 V (default) voltage sources Remote Analog Monitoring Voltage and current monitor outputs 0-5 V, 0-10 V (default) ranges for 0-100% of output Dimensions (HxWxD) 1.7 x 19.0 x 20.0” (43.2 x 429.4 x 508.1 mm) Weight Approximately 18 lb (8.2 kg) Warranty 5 years Approvals CE-marked units meet: EN61010-1, EN61000-6-2 and EN61000-6-4; UL Listed to UL3111-1; CSA certified to CSA C22.2 No 1010.1; Meets USA EMC standard; FCC, part 15B, class A; Meets Canadian EMC standard: ICES-001, Class A. Note: Specifi cations are subject to change without notice.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the XFR60-20 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Xantrex XPower Powerpack 1500 Watt Portable Power Source
Xantrex XDC 100-60, 6000 Watt Digital Programmable DC Power Supply with 0-100V/0-60A Output Voltage ...
Xantrex XDC 10-1200, 1200 Watt Digital Programmable DC Power Supply with 0-10V/0-1200A Output Voltag...
Xantrex XDC 10-600, 6000 Watt Digital Programmable DC Power Supply with 0-10V/0-600A Output Voltage ...
Xantrex XFR7.5-140 Power Supply (DC) - Programmable DC Power Supply with Zero Voltage “Soft Switchi...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods