Flush Style Poke-Thru Devices RC3, RC4, RC7, RC9, RC9AMD, AV3 & AMD8 Series Protection from water, dirt, Bring Power and Communication and debris. Services Directly to the Workstation lush Style Poke-Thru Devices from Wiremold/Legrand are an excellent solution for bringing power, communication, and Faudio/video services to the workstation in an open space, above-grade floor environment. All Wiremold/Legrand Flush ™ Style Poke-Thru Devices come with built-in TopGuard protection, an industry-leading design that meets and exceeds UL scrub water exclusion requirements for tile and carpet floors. Topguard protection prevents water, dirt, or debris from entering not just the power devices, but also the communication devices. RC7 Flush Poke-Thru Series AV3 Flush Poke-Thru Series All Wiremold/Legrand Flush Style Poke-Thru Devices can be installed on tile, carpet, or wood covered floors. Each of these devices provides an excellent solution for both new or retrofit construction, with typical applications that include office buildings, airports, malls, shopping centers, libraries, and schools. RC3 Flush Poke-Thru Series RC4 Flush Poke-Thru Series AMD8 All Communication Flush Poke-Thru Series Features & Benefits ■ The new AV3 Series is specifically designed to meet the ■ Provides flexibility with a single poke-thru unit. 20A duplex growing needs of the audio and video market. The AV3 receptacle in the RC3, and the RC7 Series can be wired as ® Series accepts the Extron MAAP Series mini architectural standard or isolated ground receptacle. Two 20A duplex power adapter plates. The MAAP line includes passive A/V connector receptacles in the RC4 Series are wired with a 6-wire system plates that support a wide variety of video, audio, control, voice with individual neutral and ground wires, and can be wired for and data connectors, as well as active modules such as VGA standard or isolated ground. RC9 quad 15A receptacle can line drivers, audio buffers and twisted pair transmitters. (Extron also be wired as standard or isolated ground receptacle. devices sold separately only through authorized Extron dealers.) ■ Individual slide covers. Protects power and communication devices. Power slide covers snap back into place when receptacle ■ The new AMD8 Series is designed to meet the growing is not in use. Activate either power or communication services, need for more communication capacity at the workstation. simultaneously or individually. RC9AMD and AMD8 Series The AMD8 is the largest capacity all communication poke-thru Poke-Thru Devices are the only all communication poke-thru device on the market, providing up to 8-ports for communication devices available with slide cover protection. devices. The AMD8 is a flush style device with individual slide covers to prevent water, dirt and debris from entering the ■ Datacom connectivity options. Accepts industry standard communication devices. and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for ■ TopGuard Protection. Integral design component that prevents voice, data, audio, and video applications at the point-of-use. water, dirt and debris from entering power and communication compartments. Whenever you see the TopGuard protection icon ■ “Step-on-it” installation. Quick and easy installation without on any Wiremold product, you’ll know it meets and exceeds UL the need for additional fasteners or a second installer. scrub water exclusion requirements for tile and carpet floors. ■ Suitable for use in air handling spaces. In accordance with ■ UL Listed and UL Fire Classified to U.S. and Canadian Sec 300-22(C) of the National Electrical Code. safety standards for tile and terrazzo. Includes the new ■ Meets ADA Accessibility Guidelines. Wide trim flange on the UL requirements under UL514A and UL 514C for the scrub product is designed to meet the ADA Accessibility Guidelines water exclusion test for carpet and wood covered floors. as it pertains to ADA Standard 4.5 which addresses changes ■ Multiple service capability. RC7, RC3, and RC4 Series provide in floor and ground surface levels. The poke-thru trim flanges power and communication services. The RC3 and RC4 Series are beveled so the slope is no greater than 1:2 ratio. provide for use of flush or recessed fiber optic devices. Eliminates ■ Fire rated for up to 2-hour rated floors. Maintains the fire the cost of a second poke-thru to accommodate additional services. classification of the floor. ED1215R8 – Updated June 2008 – For latest specs visit www.wiremold.com RC7 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC7STC Insert Assembly with Disposable Catalog Number Explanation RC7ATCAL Plate – Use with RC7C Series RC7 A TC AL Covers to complete installation. Identifies Identifies Identifies Identifies Color Poke-Thru Assembled that Unit is of Cover Series Unit (A) or Approved for Assembly Cover (C) Tile and (See below Carpet Floors for details) 16 1/2" [419mm] RC7ATCGY* Assembled Unit – Prewired RC7ATCBK* 20A duplex receptacle can RC7ATCAL* be wired as standard duplex RC7ATCBS* or isolated ground. Wiremold RC7ATCVY* Open System unloaded inserts RC7ATCAB* to accept two discrete keystone RC7ATCAA* connectors from most RC7SHTCBK Nonmetallic Slide Holder manufacturers are provided. 7" ™ RC7SHTCGY Assembly – Available in black • Includes 2 Cat 6 TechChoice [178mm] RC7SHTCBS (BK), gray (GY), ivory (VY), discrete keystone connectors. RC7SHTCVY and nonmetallic brass (BS). •Ortronics TracJack bezels. 5" [127mm] 16 1/2" [419mm] NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. COM50 Communication Adapter – COM75 For two 1/2" trade size conduit connections (COM50). For two 3/4" trade size conduit RC7CTCGY* Finish Flange and Slide connections (COM75). RC7CTCBK* Holder Assembly – Prewired NOTE: No additional capacity with COM75. RC7CTCAL* 20A duplex can be wired as RC7CTCBS* standard duplex or isolated RC7CTCVY* ground. Wiremold Open RC7CTCAB* system unloaded inserts to accept RC7KTCGY* Retrofit Kit – Used to upgrade RC7CTCAA* two discrete keystone connectors RC7KTCBK* existing installations of RC7 from most manufacturers 7" [178mm] RC7KTCAL* Poke-Thru Devices on carpet floors are provided. ™ RC7KTCBS* to meet scrub water requirements. • Includes 2 Cat 6 TechChoice Includes 20A duplex receptacle discrete keystone connectors. that can be wired as a standard • Ortronics TracJack bezels. 7" [178mm] duplex or isolated ground, two ™ Category 6 TechChoice discrete keystone connectors, and two Ortronics TracJack mounting bezels. Also includes scrub water finish flange and slide holder assembly. Kit also includes duplex receptacle barrier. Old barrier must be replaced with new. See installation instructions with retrofit kit for complete installation details. * Poke-Thru Devices on this page are available in some or all of the following cover color options as indicated by the part numbers: GY – Gray painted flange with gray nonmetallic cover, BK – Black painted flange with black nonmetallic cover, NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. VY – Ivory painted flange with ivory nonmetallic cover, See page 17 for specifications. AL – Brushed Aluminum flange with black nonmetallic cover BS – Brushed Brass flange with black nonmetallic cover AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. 2 RC7 Series Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC7APTCBK Abandonment Plate – ABPLUG3 Abandonment Plug Assembly – RC7APTCGY Abandonment available Complete plug assembly for 7" in black (BK), gray (GY). abandoning an open 3" [76mm] [178mm] cored-hole. Assembly includes NOTE: To abandon the RC7 Series intumescent fire-stop material to Poke-Thru Device, the internal 5" maintain the fire-classification of [127mm] gasket,duplex receptacle, and the floor, integral retainer ring to communication modules must not be removed in order to prevent the unit from pulling up maintain UL Classification. through the floor, and a black Also the stem must remain in 3 3/16" die-cast aluminum cover. the core-drilled hole. [97mm] NOTE: See page 17 for specifications. RC37REC Replacement Receptacle – RC37REC-25 Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details. The RC37REC-25 is available with 25 foot leads and can be wired as standard duplex or isolated ground. NOTE: The 20A duplex receptacle supplied with the new scrub water version RC7 Poke-Thru Device is proprietary and can only be replaced with the RC37REC or RC37REC-25. RC7 Series Poke-Thru Exploded Views Ortronics Ortronics Pass & Seymour Pass & Seymour Internal Scrub Water Gasket Internal Scrub Modular Jacks Internal Scrub Water Gasket (Sold separately) Water Gasket Modular Jacks Internal Scrub (Sold separately) Water Gasket Wiremold Open System Inserts Ortronics TracJack Modular Inserts (Included) Wiremold Open Ortronics TracJack System inserts Pass & Seymour Modular Inserts Category 5e (Included) TechChoice (Included) RC7C Cover Assembly shown with RC7A Assembled Unit shown with RC7A Assembled Unit shown with RC7C Cover Assembly comes Ortronics TracJack bezel and two two Pass & Seymour Category 5e two Ortronics TracJack modular with Pass & Seymour keystone TracJack modular inserts. (Modular keystone jacks. (Included) inserts. (Modular Jacks not jacks. (Included) Jacks not included.) included.) 3 F F RC9 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications Catalog Number Explanation RC9SHTCGY Nonmetallic Slide Holder RC9A15TCGY RC9SHTCBK Assembly – Available in gray RC9 A 15 TC GY RC9SHTCBS (GY), black (BK), ivory (VY), and IdentifiesIdentifies Identifies Identifies Identifies Color RC9SHTCVY nonmetallic brass (BS). Poke-Thru Assembled 15A Quad that Unit is of Cover Series Unit (A) or Power Approved for Assembly 5" Cover (C) Recptacle Tile and (See below [127mm] Carpet Floors for details) RC9A15TCGY* Poke-Thru Assembly – Prewired NOTE: Assembled with scrub water RC9A15TCBK* 15A quad receptacle can be wired gasket. For use on tile or RC9A15TCAL* as standard quad receptacle or carpet floors. RC9A15TCBS* isolated ground. Unit also RC9A15TCAB* includes two openings for RC9STC Insert Assembly with Disposable RC9A15TCVY* pass-through capability for one Plate – Includes prewired 15A quad 4-pair Category 5e or Category 6 receptacle. use with RC9C Series cable per opening. Covers to complete installation. 6" NOTE: Assembled with scrub water [152mm] gasket. For use on tile or 7" 16 1/2" carpet floors. [178mm] [419mm] 16 1/2" [419mm] RC9APTCBK Abandonment Plate – Abandonment available in black (BK). RC9CTCGY* Finish Flange & Slide Holder 5" RC9CTCBK* Assembly – Cover assembly [127mm] RC9CTCAL* includes two openings for RC9CTCBS* pass-through capability for RC9CTCAB* one 4-pair Category 5e or NOTE: To abandon the RC9 Series RC9CTCVY* Category 6 cable per opening. Poke-Thru Device, the internal gasket and quad NOTE: Assembled with scrub water receptacle must not be gasket. For use on tile or 7" [178mm] removed in order to carpet floors. maintain UL Classification. Also, the stem must remain in the core-drilled hole. RC9REC Replacement Receptacle – Prewired 15A quad receptacle can be wired as standard * Poke-Thru Devices on this page are available in some or all of the receptacle or isolated ground. following cover color options as indicated by the part numbers: Available only in black. See GY – Gray painted flange with gray nonmetallic cover, installation instructions with BK – Black painted flange with black nonmetallic cover, replacement receptacle for VY – Ivory painted flange with ivory nonmetallic cover, complete installation details. AL – Brushed Aluminum flange with black nonmetallic cover BS – Brushed Brass flange with black nonmetallic cover AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. ABPLUG3 Abandonment Plug Assembly – Complete plug assembly for 7" abandoning an open 3" [76mm] [178mm] cored-hole. Assembly includes intumescent fire-stop material to maintain the fire-classification of the floor, integral retainer ring to prevent the unit from pulling up through the floor, and a black 3 3/16" die-cast aluminum cover. [97mm] NOTE: See page 17 for specifications. 4 F F AV3 Audio/Video Flush Style Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications Catalog Number Explanation AV3SHTCGY Nonmetallic Slide Holder AV3ATCAL AV3SHTCBK Assembly – Available in gray AV3 A TC AL AV3SHTCAL (GY), black (BK), ivory (VY), Identifies Identifies Identifies Identifies Color AV3SHTCBS aluminum colored (AL), Poke-Thru Assembled that Unit is of Cover AV3SHTCVY brass colored (BS). Series Unit (A) or Approved for Assembly Cover (C) Tile and (See below NOTE: Assembled with scrub water Carpet Floors for details) gasket. For use on tile or carpet floors. AV3ATCGY* Assembled Unit – A/V device 5 3/4" AV3ATCBK* includes one prewired 20A duplex [146mm] AV3ATCAL* receptacle which can be wired as AV3ATCAA* a standard receptacle or AV3ATCBS* isolated ground. AV3ATCAB* AV3ATCVY* • Includes one Extron bezel to AV3STC Insert Assembly with Disposable accept Extron MAAP mini Plate – Use with AV3C and architectural adapter plates. AV3CRT Series covers to (Extron devices sold complete installation. 7" [178mm] separately, only through 8 1/4" [210mm] authorized Extron dealers). 16 5/8" • Includes Ortronics TracJack and [422mm] 17" Series II mounting bezels. [432mm] • Includes Wiremold Open System bezels and inserts. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3APTCGY Abandonment plate – NOTE: Modular Jacks sold separately. AV3APTCBK Abandonment available in black (BK) and gray (GY). AV3CTCGY* Finish Flange & Slide Holder AV3CTCBK* Assembly – Includes one prewired 5 3/4" [146mm] AV3CTCAL* 20A duplex receptacle which can AV3CTCAA* be wired as a standard receptacle AV3CTCBS* or isolated ground. AV3CTCAB* RC37REC Replacement Receptacle – AV3CTCVY* • Includes one Extron bezel to RC37REC-25 Prewired snap-in 20A receptacle accept Extron MAAP mini can be wired as standard duplex architectural adapter plates. or isolated ground. Available (Extron devices sold separately, only in black. See installation only through authorized instructions with replacement Extron dealers). 8 1/4" receptacle for complete [210mm] • Includes Ortronics TracJack and installation details. The Series II mounting bezels. RC37REC-25 is available • Includes Wiremold Open System with 25 foot leads and can bezels and inserts. be wired as standard duplex or isolated ground. NOTE: Assembled with scrub water gasket. For use on tile or NOTE: The 20A duplex receptacle carpet floors. supplied with the scrub water version AV3 Poke-Thru Device is proprietary and can only be NOTE: Modular Jacks replaced with the RC37REC sold separately. or RC37REC-25. * Poke-Thru Devices on this page are available in some or all of the following cover color options as indicated by the part numbers: ABPLUG4 Abandonment Plug Assembly – GY – Gray painted flange with gray nonmetallic cover, Complete plug assembly for BK – Black painted flange with black nonmetallic cover, 7 1/2" abandoning an open 4" [102mm] [191mm] VY – Ivory painted flange with ivory nonmetallic cover, cored-hole. Assembly includes AL – Brushed Aluminum flange with black nonmetallic cover intumescent fire-stop material to BS – Brushed Brass flange with black nonmetallic cover maintain the fire-classification of AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover the floor, integral retainer ring to AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. prevent the unit from pulling up through the floor, and a black NOTE: See page 17 for specifications. 3 7/8" die-cast aluminum cover. [98mm] 5 AV3 Audio/Video Series Poke-Thru Exploded Views Extron MAAP Series mini Ortronics Pass & Seymour architectural devices AV3 Assembled Unit shown with Extron bezel AV3 Assembled Unit shown with Pass & AV3ART Assembled Unit shown with and Extron MAAP Series mini architectural Seymour Category 5e modular jacks TracJack Category 5e modular jacks adapter plates and devices. Extron MAAP (Jacks not included). (Jacks not included). devices sold separately and only through authorized Extron dealers. 6 F F RC9AMD Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC9CMDTCGY* Finish Flange & Slide Catalog Number Explanation RC9CMDTCBK* Holder Assembly – RC9AMDTCGY RC9CMDTCAL* RC9 AMD TC GY RC9CMDTCBS* • Includes with bezels to accept Identifies Identifies Identifies Identifies Color RC9CMDTCAB* 4 Ortronics TracJack modular Poke-Thru Assembled that Unit is of Cover Series Unit (A) or Approved for Assembly RC9CMDTCVY* jacks and 2 Ortronics Series II Cover (C) Tile and (See below modular jacks. (Sold separately.) Carpet Floors for details) • Wiremold Open System inserts. NOTE: Assembled with scrub water RC9AMDTCGY* Poke-Thru Assembly – All gasket. For use on tile or RC9AMDTCBK* communication device accepts 7" carpet floors [178mm] RC9AMDTCAL* up to four UTP connectors. RC9AMDTCBS* RC9AMDTCAB* • Includes with bezels to accept 4 NOTE: Modular Jacks RC9AMDTCVY* Ortronics TracJack modular jacks sold separately. RC9AMDTCAA* and 2 Ortronics Series II modular jacks. (Sold separately.) • Wiremold Open System Inserts. RC9SHMDTCGY Nonmetallic Slide Holder NOTE: Assembled with scrub water RC9SHMDTCBK Assembly– available in black (BK), 7" gasket. For use on tile or RC9SHMDTCBS gray (GY), ivory (VY), and [178mm] carpet floors RC9SHMDTCVY nonmetallic brass (BS). 10" [254mm] NOTE: Modular Jacks 5" [127mm] sold separately. RC9AM2STC Insert Flange with Disposable RC9APTCBK Abandonment Plate – Plate – Use with RC9C, RC9CMD, Abandonment available in and RC9CMDRT Series Covers black (BK). to complete installation. NOTE: To abandon the RC9 Series Poke-Thru Device, the internal 6" 5" gasket and quad receptacle [152mm] 10" [127mm] must not be removed in order [254mm] to maintain UL Classification. Also, the stem must remain in the core-drilled hole. ABPLUG3 Abandonment Plug Assembly – Complete plug assembly for 7" [178mm] abandoning an open 3" [76mm] * Poke-Thru Devices on this page are available in some or all of the cored-hole. Assembly includes following cover color options as indicated by the part numbers: intumescent fire-stop material to GY – Gray painted flange with gray nonmetallic cover, maintain the fire-classification of BK – Black painted flange with black nonmetallic cover, VY – Ivory painted flange with ivory nonmetallic cover, the floor, integral retainer ring to AL – Brushed Aluminum flange with black nonmetallic cover prevent the unit from pulling up BS – Brushed Brass flange with black nonmetallic cover through the floor, and a black AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover 3 3/16" die-cast aluminum cover. [97mm] AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. NOTE: See page 17 for specifications. 7 RC9AMD Series Poke-Thru Exploded Views Pass & Seymour Pass & Seymour RC9CMDTC Cover Assembly RC9AMDTC Assembled Unit shown with Wiremold shown with two Pass & Seymour open system inserts. Category 5e modular jacks. (Modular Jacks sold separately.) (Modular Jacks sold separately.) Ortronics Ortronics RC9AMDRTTC Assembled Unit shown RC9CMDRTTC Cover Assembly shown with two Ortronics Series II Bezels. with two Ortronics TracJack bezels. (Modular jacks not included.) (Modular jacks not included.) 8 F F AMD8 All Communication Flush Style Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications AMD8SHTCGY Nonmetallic Slide Holder Catalog Number Explanation AMD8ATCAL AMD8SHTCBK Assembly – Available in gray AMD8 A TC AL AMD8SHTCAL (GY), black (BK), ivory (VY), AMD8SHTCBS aluminum colored (AL), brass Identifies Identifies Identifies Identifies Color Poke-Thru Assembled that Unit is of Cover AMD8SHTCVY colored (BS). Series Unit (A) or Approved for Assembly NOTE: Assembled with scrub water Cover (C) Tile and (See below Carpet Floors for details) gasket. For use on tile or carpet floors. AMD8ATCGY* Poke-Thru Assembly – All 5" AMD8ATCBK* communication device accepts up [127mm] AMD8ATCAL* to eight UTP, fiber optic, audio, or AMD8ATCAA* video connectors. AMD8ATCBS* AMD8ATCAB* • Includes with bezels to accept AMD8ATCVY* 8 Ortronics TracJack inserts and ABPLUG4 Abandonment Plug Assembly – 4 Ortronics Series II inserts. Complete plug assembly for (Devices sold separately.) 7 1/2" abandoning an open 4" [102mm] [191mm] • Wiremold Open System bezels cored-hole. Assembly includes and inserts. intumescent fire-stop material to 7 1/2" NOTE: Assembled with scrub water maintain the fire-classification of [191mm] gasket. For use on tile or the floor, integral retainer ring to 9 3/4" carpet floors. prevent the unit from pulling up [248mm] through the floor, and a black NOTE: Modular Jacks sold separately. 3 7/8" die-cast aluminum cover. [98mm] AMD8CTCGY* Finish Flange & Slide Holder AMD8STC Insert Assembly with AMD8CTCBK* Assembly – Disposable Plate – Use with AMD8CTCAL* AMD8C and AMD8CRT Series AMD8CTCAA* • Includes with bezels to accept Covers to complete installation. AMD8CTCBS* 8 Ortronics TracJack inserts 7" AMD8CTCAB* and 4 Ortronics Series II inserts. [178mm] AMD8CTCVY* (Devices sold separately.) 9 7/16" • Wiremold Open System bezels [240mm] and inserts. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. 7 1/2" [191mm] NOTE: Modular Jacks sold separately. AMD8APTCGY Abandonment plate – AMD8APTCBK Abandonment available in black (BK) and gray (GY). 5" [127mm] NOTE: See page 17 for specifications. * Poke-Thru Devices on this page are available in some or all of the following cover color options as indicated by the part numbers: GY – Gray painted flange with gray nonmetallic cover, BK – Black painted flange with black nonmetallic cover, VY – Ivory painted flange with ivory nonmetallic cover, AL – Brushed Aluminum flange with black nonmetallic cover BS – Brushed Brass flange with black nonmetallic cover AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. 9 E AMD8 All Communication Series Poke-Thru Exploded Views Ortronics Ortronics Ortronics TracJack Ortronics TracJack Modular Jack Modular Jack (Sold Separately) (Sold Separately) AMD8C Cover Assembly shown with Ortronics TracJack bezels AMD8 Assembled Unit shown with Ortronics TracJack and TracJack Category 5e modular jacks. Ortronics Series II Category 5e modular Jacks (Jacks not included). bezels also included. TracJack and Series II modular Jacks must be purchased separately. Pass & Seymour Pass & Seymour Pass & Seymour TechChoice Modular Jack (Sold separately) Pass & Seymour TechChoice Modular Jack Wiremold Open (Sold separately) System Bezel Wiremold Open System Bezel AMD8C Cover Assembly shown with Pass & Seymour (unloaded) AMD8 Assembled Unit shown with Pass & Seymour Category keystone open system jacks. Keystone jacks, as well as other 5e TechChoice jacks. (Jacks sold separately.) Activate 2A Series multimedia jacks must be ordered separately. (Jacks sold separately.) 10 RC3 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC3SHTCBK Nonmetallic Slide Holder Catalog Number Explanation RC3SHTCGY Assembly – Available in black RC3ATCAL RC3SHTCBS (BK), gray (GY), ivory (VY), and RC3 A TC AL RC3SHTCVY nonmetallic brass (BS). Identifies Identifies Identifies Identifies Color 5" Poke-Thru Assembled that Unit is of Cover [127mm] Series Unit (A) or Approved for Assembly Cover (C) Tile and (See below Carpet Floors for details) NOTE: Assembled with scrub water gasket. For use on tile or RC3ATCGY Assembled Unit – Prewired carpet floors. RC3ATCBK 20A duplex receptacle can RC3ATCAL be wired as standard duplex RC3ATCBS or isolated ground. Wiremold Open RC3ATCVY System unloaded inserts to RC3ATCAB accept four discrete keystone RC3ATCAA connectors from most RC3CTCGY* Finish Flange and Slide manufacturers are provided. 7 1/2" RC3CTCBK* Holder Assembly – Prewired [191mm] RC3CTCAL* 20A duplex receptacle can • Includes 2 Ortronics TracJack RC3CTCBS* be wired as standard duplex mounting bezels and 2 Ortronics RC3CTCAB* or isolated ground. Wiremold Series II bezels. (Devices sold RC3CTCVY* Open System unloaded inserts separately.) RC3CTCAA* to accept four discrete keystone connectors from most 7 1/2" 16" [191mm] manufacturers are provided. [406mm] NOTE: Assembled with scrub water • Includes 2 Ortronics TracJack gasket. For use on tile or mounting bezels and 2 Ortronics carpet floors. Series II bezels. (Devices sold separately.) NOTE: Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. NOTE: Modular Jacks RC3STC Insert Assembly with Disposable sold separately. Plate – Use with RC3C Series Covers to complete installation. COM50 Communication Adapter – COM75 For two 1/2" trade size conduit connections (COM50). For two 16 11/16" 3/4" trade size conduit [424mm] connections (COM75). NOTE: No additional capacity with COM75. NOTE: See page 17 for specifications. * Poke-Thru Devices on this page are available in some or all of the following cover color options as indicated by the part numbers: GY – Gray painted flange with gray nonmetallic cover, BK – Black painted flange with black nonmetallic cover, VY – Ivory painted flange with ivory nonmetallic cover, AL – Brushed Aluminum flange with black nonmetallic cover BS – Brushed Brass flange with black nonmetallic cover AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. 11 RC3 Series Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC3KTCGY Retrofit Kit – Used to upgrade RC37REC Replacement Receptacle – RC3KTCBK existing installations of RC3 RC37REC-25 Prewired snap-in 20A receptacle RC3KTCAL Poke-Thru Devices on carpet can be wired as standard duplex RC3KTCBS floors to meet scrub water or isolated ground. Available RC3KTCVY requirements. Includes 20A duplex only in black. See installation 7 1/2" receptacle that can be wired as a instructions with replacement [191mm] standard duplex or isolated ground. receptacle for complete Also includes scrub water finish installation details. The flange and slide holder assembly. RC37REC-25 is available Flange available in painted black with 25 foot leads and can (BK), gray (GY), ivory (VY), and be wired as standard duplex brushed metal finishes in aluminum or isolated ground. (AL), and brass (BS). Kit also NOTE: The 20A duplex receptacle includes duplex receptacle barrier. supplied with the scrub water Old barrier must be replaced with version RC3 Poke-Thru Device new. See installation instructions is proprietary and can only with retrofit kit for complete be replaced with the RC37REC installation details. or RC37REC-25. RC3APTCBK Abandonment Plate – ABPLUG4 Abandonment Plug Assembly – RC3APTCGY Abandonment available in Complete plug assembly for 7 1/2" black (BK), gray (GY). abandoning an open 4" [102mm] [191mm] cored-hole. Assembly includes NOTE: To abandon the RC3 Series 5" intumescent fire-stop material to [127mm] Poke-Thru Device, the internal gasket,duplex receptacle, and maintain the fire-classification of communication modules must the floor, integral retainer ring to not be removed in order to prevent the unit from pulling up maintain UL Classification. through the floor, and a black Also the stem must remain in 3 7/8" die-cast aluminum cover. the core-drilled hole. [98mm] NOTE: See page 17 for specifications. 12 RC3 Series Poke-Thru Exploded Views Ortronics Ortronics Internal Scrub Water Gasket Internal Scrub Water Gasket Ortronics TracJack Bezel (Included) Ortronics TracJack Bezel (Included) RC3 Assembled Unit shown with two Ortronics TracJack RC3C Cover Assembly shown with Ortronics TracJack bezels. Category 5e modular jacks (not included). Ortronics Series II bezels also included. TracJack and Series II modular inserts must be purchased separately. Pass & Seymour Pass Seymour Internal Scrub Internal Scrub Water Gasket Water Gasket Mounting Bracket (Flush or Recessed) Wiremold Open System Bezels Keystone Open (Included) System Insert RC3A Assembled Unit shown with two Pass & Seymour RC3C Cover Assembly shown with Wiremold (unloaded) Category 5e TechChoice modular jacks. (Modular Jacks keystone open system inserts. Keystone jacks, as well as other sold separately.) Activate 2A Series multimedia jacks must be ordered separately. (Modular Jacks sold separately.) 13 RC4 Series Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC4SHTCBK Nonmetallic Slide Holder Catalog Number Explanation RC4SHTCGY Assembly – Available in black RC4ATCAL RC4SHTCBS (BK), gray (GY), ivory (VY), and RC4 A TC AL RC4SHTCVY nonmetallic brass (BS). Identifies Identifies Identifies Identifies Color Poke-Thru Assembled that Unit is of Cover 6 1/4" Series Unit (A) or Approved for Assembly [159mm] NOTE: Assembled with scrub water Cover (C) Tile and (See below gasket. For use on tile or Carpet Floors for details) carpet floors. RC4ATCGY* Assembled Unit – Unit RC4ATCBK* includes four prewired 20A RC4ATCAL* receptacles. Each duplex RC4ATCBS* receptacle is wired as a RC4ATCVY* separate circuit. The duplex RC4ATCAB* can be wired as a standard RC4ATCAA* receptacle or isolated ground. Wiremold Open System unloaded RC4CTCGY* Finish Flange and inserts to accept four discrete RC4CTCBK* Slide Holder Assembly – keystone connectors from most RC4CTCAL* Wiremold open system unloaded 8 1/4" manufacturers are provided. [210mm] RC4CTCBS* inserts to accept four discrete RC4CTCAB* keystone connectors from most • Includes Ortronics TracJack RC4CTCVY* manufacturers are provided. mounting bezel and Ortronics RC4CTCAA* Series II communication housing. • Includes Ortronics TracJack (Sold separately.) 8 1/4" mounting bezel and Ortronics [210mm] Series II communication housing. 16 3/8" (Sold separately.) [416mm] NOTE: Assembled with scrub water NOTE: Assembled with scrub water gasket. For use on tile or gasket. For use on tile or carpet floors. carpet floors. NOTE: Modular Jacks NOTE: Modular Jacks sold separately. sold separately. RC4STC Insert Assembly with Disposable RC4SRTTC Plate – Comes complete with COM50 Communication Adapter – four prewired 20A receptacles. 6" COM75 For two 1/2" trade size conduit Use RC4STC with RC4C Series [152mm] connections (COM50). For two Covers. Use RC4SRTTC 3/4" trade size conduit Stem with RC4CRT Series connections (COM75). Covers (Ortronics). NOTE: No additional capacity with COM75. 16 3/8" [416mm] * Poke-Thru Devices on this page are available in some or all of the NOTE: See page 17 for specifications. following cover color options as indicated by the part numbers: GY – Gray painted flange with gray nonmetallic cover, BK – Black painted flange with black nonmetallic cover, VY – Ivory painted flange with ivory nonmetallic cover, AL – Brushed Aluminum flange with black nonmetallic cover BS – Brushed Brass flange with black nonmetallic cover AA – Brushed Aluminum flange with aluminum-colored nonmetallic cover AB – Brushed Brass flange with brass-colored nonmetallic cover Where applicable, slide covers match the cover color. 14 RC4 Series Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications RC4KTCBK Retrofit Kit – Used to upgrade RC4REC2 Replacement Receptacle – Two RC4KTCGY existing installations of RC4 RC4REC2-25 prewired 20A duplex receptacles RC4KTCAL Poke-Thru Devices on carpet can be wired as standard duplex RC4KTCBS floors to meet scrub water or isolated ground. Available only RC4KTCAB requirements. Includes two 20A in black. See installation instructions RC4KTCVY duplex receptacles that can be with replacement receptacle for wired as a standard duplex or 8 1/4" complete installation details. isolated ground. Also includes [210mm] RC4REC2-25 is available with with scrub water finish flange and 25 foot leads and can be wired as slide holder assembly. Flange standard duplex or isolated ground. available in painted black (BK), gray (GY), ivory (VY), and brushed NOTE: The 20A duplex receptacle metal finishes in aluminum (AL), supplied with the scrub water version RC4 Poke-Thru Device and brass (BS). See installation is proprietary and can only be instructions with retrofit kit for replaced with the RC4REC2 or complete installation details. RC4REC2-25. ABPLUG4 Abandonment Plug Assembly – Complete plug assembly for abandoning an open 4" [102mm] 7 1/2" [191mm] cored-hole. Assembly includes RC4APTCBK Abandonment Plate – Available in intumescent fire-stop material to RC4APTCGY black (BK), gray (GY), painted maintain the fire-classification of RC4APTCAB brass (AB), and ivory (VY). the floor, integral retainer ring to RC4APTCVY prevent the unit from pulling up NOTE: To abandon the RC4 Series Poke- Thru Device, the internal through the floor, and a black gasket, duplex receptacle, and die-cast aluminum cover. 6 1/4" 3 7/8" communication modules must [159mm] [98mm] not be removed in order to maintain UL Classification. Also the stem must remain in the core- drilled hole. NOTE: See page 17 for specifications. 15 RC4 Series Poke-Thru Exploded Views Ortronics Ortronics Communication Bracket. Communication Bracket. (Bracket Cannot Be Removed – (Bracket Cannot Be Removed – For Illustration Purposes Only.) For Illustration Purposes Only.) RC4 – Mounting of two Ortronics TracJack Category 5e RC4 – Mounting of one Ortronics TracJack Category 5e modular jacks in the flush position. Will accept a total modular jack in the recessed position. Will accept a total of four TracJack modular jacks in the flush position. of two TracJack modular jacks in the recessed position. (Modular Jacks not included.) (Modular Jacks not included.) Pass & Seymour Pass & Seymour Communication Bracket. Communication Bracket. (Bracket Cannot Be Removed – (Bracket Cannot Be Removed – For Illustration Purposes Only.) For Illustration Purposes Only.) RC4-Mounting of four keystone connectors in the flush RC4 – Mounting of two fiber optic inserts (sold separately) position. (Jacks sold separately.) in the recessed position. (Jacks sold separately.) 16 Flush Poke-Thru Series Specifications Copper Cross Section: Copper Cross Sectional Area The copper cross-sectional area determines the amount of wire fill of Commonly Used Conductors capacity in a poke-thru device. Unlike other wire and cable management Size Solid systems that utilize wire fill capacity, a poke-thru device is UL tested 2 #24 .00032 sq. in. [.206mm ] under fire conditions to determine the maximum amount of copper 2 conductors that will pass through a poke-thru device, while maintaining #22 .00050 sq. in. [.322mm ] 2 the fire-rating of the floor assembly. All Walker Flush Style Devices are #14 .00323 sq. in. [2.083mm ] UL Classified to U.S. and Canadian safety standards (see complete 2 #12 .00512 sq. in. [3.303mm ] marking on product) to accommodate at a maximum rating as follows: 2 #10 .00815 sq. in. [5.258mm ] RC7 SERIES 2 # 8 .01296 sq. in. [8.361mm ] Maximum Allowable Copper Cross-Sectional Area: 2 RC7 Power Compartment Only = .01536 sq. in. [9.91mm ] NOTE: Use above values for solid or stranded conductors. 2 RC7 Each Communication Compartment Only = .0040 sq. in. [2.58mm ] Trim Flange for NOTE: The RC7 Series requires a 3" [76mm] cored hole. Carpet or Tile (American made core bit having an outside diameter of 3 1/16" [78mm].) Concrete Slab RC9 SERIES Maximum Allowable Copper Cross-Sectional Area: 2 RC9 Power Compartment Only = .01536 sq. in. [9.91mm ] 2 RC9 Each Communication Compartment Only = .0040 sq. in. [2.58mm ] NOTE: The RC9 Series requires a 3" [76mm] cored hole. (American made core bit having an outside diameter of 3 1/16" [78mm].) Scrub Water Intumescent AV3 SERIES Gasket Material Maximum Allowable Copper Cross-Sectional Area: Retaining Flange 2 AV3 Power Compartment Only = .01536 sq. in. [9.91mm ] 2 AV3 Communication Compartment Only = .01938 sq. in. [12.503mm ] NOTE: The AV3 Series requires a 4" [102mm] cored hole. 3/4" Trade Size EMT (American made core bit having an outside diameter of 4 1/16" [103mm].) COM50 1/2" Trade Conduit Size Conduit RC9AMD SERIES Connections (Sold Separately) Maximum Allowable Copper Cross-Sectional Area: 2 RC9AMD Communication Compartment = .01600 sq. in. [10.324mm ] Junction Box NOTE: The RC9AMD Series requires a 3" [76mm] cored hole. 24.5 cu in. [401ml] (American made core bit having an outside diameter of 3 1/16" [78mm].) AMD8 SERIES Maximum Allowable Copper Cross-Sectional Area: 2 AMD8 Communication Compartment Only = .03474 sq. in. [22.412mm ] NOTE: The AMD8 Series requires a 4" [102mm] cored hole. (American made core bit having an outside diameter of 4 1/16" [103mm].) Concrete Thickness Min/Max: RC3 SERIES 1-HOUR RATED FLOOR – 2 1/4" [57mm] min over Maximum Allowable Copper Cross-Sectional Area: 2 top of deck (or 3" [76mm] thick reinforced RC3 Power Compartment Only = .01536 sq. in. [9.91mm ] 2 concrete slab) to a maximum of RC3 Each Communication Compartment Only = .008 sq. in. [5.16mm ] 7 1/2" [191mm]. NOTE: The RC3 Series requires a 4" [102mm] cored hole. (American made core bit having an outside diameter of 4 1/16" [103mm].) 2-HOUR RATED FLOOR – 3 1/4" [83mm] min over top of deck (or 4" [102mm] thick reinforced RC4 SERIES concrete slab) to a maximum of Maximum Allowable Copper Cross-Sectional Area: 7 1/2" [191mm]. 2 RC4 Power Compartment Only = .03072 sq. in. [19.82mm ] 2 Floor Coverings: RC4 Each Communication Compartment Only = .008 sq. in. [5.16mm ] The poke-thru device is fire rated for carpet and NOTE: The RC4 Series requires a 4" [102mm] cored hole. wood covered concrete floors, and tile floor coverings (American made core bit having an outside diameter of 4 1/16" [103mm].) 1/8" to 3/4" [3.2mm to 19.1mm] thickness. For floor coverings not listed above, consult factory. IMPOR TANT ! The above maximum copper cross sectional area values are for each individual power and communication compartment. DO NOT add values together for any one compartment. CAUTION: These devices are suitable for 1, 1 1/2, and 2 hour rated floor assemblies as described in the UL Fire Resistance directory for CAUTION! Core bits vary in size from manufacturer to manufacturer: each service. • Use a 3" [76mm] American made core bit having an outside diameter of These devices meet all UL scrub water 3 1/16" [78mm]. Minimum hole diameter: 3 1/16" [78mm]. requirements, but are not suitable for wet or damp locations, or other areas subject • Use a 4" [102mm] American made core bit having an outside diameter to saturation with water or other liquids of 4 1/16" [103mm]. Minimum hole diameter: 4 1/16" [103mm]. such as commercial kitchens. 17 Notes NOTE: The material that is used in Walker Poke-Thru devices is not listed under the directory for Fire Stopping Material because the poke-thru device is UL Classified as “Outlet Boxes and Fittings Classified For Fire Resistance (CEYY)”. The pass/fail criteria comes from UL263. The pass criteria is that the poke-thru unit cannot exceed 325° F. above ambient before the concrete slab (or deck) reaches this same temperature. Some poke-thru devices are tested for 2 hours while others are tested for 4 hours. The intumescent material has never been tested as a fire-stopping material as a stand-alone device. This material is designed to work as a unit with the entire poke-thru device. Guide Form Specs CAD Drawings Available 18 Notes 19 Datacom Connectivity Options ® Now you have a wide range of options for providing datacom connectivity into Wiremold Cable Management Systems. They are: ® ® • Ortronics TracJack and Series II Modular Connectivity Solutions ORT ORT ORT ™ • Pass & Seymour Activate Modular Inserts P&S P&S P&S • Open System Communication Modules OPEN OPEN Use these icons to determine connectivity options for each Wiremold System component: OPEN ® Ortronics Connectivity ORT ® TracJack Individual Jack System P&S • Front-loading, snap-in design supports future moves adds and changes OPEN • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media • Choice of 13 colors and color matched to Wiremold Systems • Universal T568A/B wiring format Series II Front-Loading, Module System • Module design features easy snap-in front-loading design • Linear 110 punch down format for easy termination • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media • Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com. Pass & Seymour Legrand Network Wiring ORT ™ Activate Series Front-Loading Inserts P&S • Modular inserts for voice, data, audio and video applications OPEN • Front-load, snap-in design • Color and texture matched to Wiremold Systems • Available Category 3, 5e, 6, as well as 6-position USOC • Universal T568A/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com. Open Connectivity Solutions ORT Wiremold Open System Communications Modules P&S • Accommodate a wide range of manufacturers’ communications outlets including OPEN keystone jacks, as well as proprietary solutions from Avaya (Lucent) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative. Wiremold / Legrand U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2008 Wiremold / Legrand All Rights Reserved ED1215R8 – Updated June 2008 – For latest specs visit www.wiremold.com