™ OmniBox Series Floor Boxes Fully Adjustable, Multiple Service, Floor Boxes A/V CONNECTIVITY FIBER OPTIC CAT5 ® ™ Wiremold OmniBox Series Floor Boxes provides an excellent activation solution when multiple services are required in open ™ space areas. OmniBox Series Floor Boxes offer one-, two-, and three-gang multiservice boxes that are fully adjustable before and after the concrete pour. Available in both stamped steel and cast iron fabrications, they meet a wide range of workstation requirements for today’s and tomorrow’s service needs. These floor boxes have many applications, some of which include schools, financial institutions, and commercial office buildings. Two-gang OmniBox Series Floor Box Installation with an aesthetically pleasing flush activation cover. F E A T U R E S & B E N E F I T S n Fully adjustable box. Fully adjustable both before and after n New 828COMTC Series Cover Kit in brass and concrete pour. Reduces installation costs. brushed aluminum. Allows communication devices to be recessed into 880S and 880CS Series Floor Boxes. n Two Fabrications: Stamped Steel – Lower cost concrete-tight construction option for above grade applications. Cast-Iron – n New partition support kit for 3-gang tile flanges. The Watertight construction for on or below grade applications. 838TAL-880 Series Flanges provide partition supports in tile applications for added strength and durability. n Available in two depths. Economical alternatives when pour depths are limited. n TopGuard protection. All cover assemblies for the OmniBox Floor Box Series have TopGuard protection. An integral design n Flush activation assemblies for carpet and tile. Aesthetically which keeps out water, dirt, and debris from the power and pleasing assemblies are interchangeable in both cast-iron and communication compartments. stamped steel box models. n Boxes and covers have been listed by Underwriters n Available in one-, two-, and three-gang configurations. Laboratories Inc. to their standard UL514A, 514C, Removable dividers increase capacity. More configurations to 514D, and Canadian standard C22.2 support multiservice applications. n Datacom connectivity options. Accepts industry standard n Triple service boxes. Accommodates power, communication and proprietary devices from a wide range of manufacturers and/or audio/video devices which reduces the need for to provide a seamless and aesthetically pleasing interface for multiple boxes. voice, data, audio, and video applications at the point-of-use. n New brushed aluminum covers for power applications. A wide selection of data and adapter options available for use 830CK Series Aluminum Covers redesigned to accept threaded ® ® with Ortronics TracJack and Series II devices. conduit when passing through power cables. n New brass and brushed aluminum covers accept single locking power receptacles. New 828DLR Series provides single flip lid cover. Protection from water, dirt, and debris. Single-gang stamped steel and triple-gang cast iron models of OmniBox Series Floor Boxes. E D 7 7 2 R 1 1 – U p d a t e d A u g u st 2 0 0 9 – Fo r l a t e st s p e c s v i s i t w w w. w i re m o l d . co m OmniBox Series Stamped Steel Floor Boxes Ordering Information Catalog No./Item Description/Specifications 880S1 One-Gang Stamped Steel Floor Box – Fully Adjustable. 3 23/32" [94mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (3) 1/2" [12.7mm], (5) 3/4" [19.1mm] 53 1 3/4" [44mm] 1/2" [12.7mm] 3 15/32" (2) 1" [25mm] [88mm] 4 13/16" [122mm] 4 13/16" 880S2 Two-Gang Stamped Steel Floor Box – Fully Adjustable. [122mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (4) 1/2" [12.7mm], (8) 3/4" [19.1mm] 117 1 3/4" [44mm] 1/2" [12.7mm] 3 15/32" (4) 1" [25mm] (58/59) [88mm] 7 15/16" [202mm] 4 13/16" 880S3 Three-Gang Stamped Steel Floor Box – Fully Adjustable. [122mm] TECHNICAL SPECIFICATIONS 3 15/32" Cubic Inch Adjustment Adjustment [88mm] Conduit Openings Capacity Before Pour After Pour (5) 1/2" [12.7mm], (11) 3/4" [19.1mm] 180 1 3/4" [44mm] 1/2" [12.7mm] 12" (6) 1" [25mm] (56/68/56) [305mm] 3 23/32" 880M1 One-Gang Shallow Stamped Steel Floor Box – Fully Adjustable. [94mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (5) 1/2" [12.7mm], 37 1 3/4" [44mm] 1/2" [12.7mm] 2 15/32" (5) 3/4" [19.1mm] [63mm] 4 13/16" [122mm] 880M2 Two-Gang Shallow Stamped Steel Floor Box – Fully Adjustable. 4 13/16" [122mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour 2 15/32" (8) 1/2" [12.7mm], 80 1 3/4" [44mm] 1/2" [12.7mm] [63mm] (8) 3/4" [19.1mm] 40/40 7 15/16" [202mm] 4 13/16" 880M3 Three-Gang Shallow Stamped Steel Floor Box – Fully Adjustable. [122mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour 2 15/32" (11) 1/2" [12.7mm], 126 1 3/4" [44mm] 1/2" [12.7mm] 12" [63mm] (11) 3/4" [19.1mm] 39/48/39 [305mm] OmniBox Series Floor Boxes are avail- able in a full range of box sizes, depths, and capacities with activation covers that enhance any decor and provide a full range of connectivity options. 2 OmniBox Series Cast Iron Floor Boxes Ordering Information Catalog No./Item Description/Specifications 880CS1-1 One-Gang Cast Iron Floor Box – Fully Adjustable. 4 3/8" [111mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (4) 1" [25mm] 48 1 3/4" [44mm] 1/2" [12.7mm] 3 7/16" [87mm] 5 3/16" [132mm] 880CS2-1 Two-Gang Cast Iron Floor Box – Fully Adjustable. 5 3/16" [132mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (6) 1" [25mm] 94 1 3/4" [44mm] 1/2" [12.7mm] (45/49) 8 1/2" 3 7/16" [216mm] [87mm] 5 3/16" 880CS3-1 Three-Gang Cast Iron Floor Box – Fully Adjustable. [132mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (8) 1" [25mm] 160 1 3/4" [44mm] 1/2" [12.7mm] (53/54/53) 12 1/2" 3 7/16" [318mm] [87mm] 4 3/8" 880CM1-1 One-Gang Shallow Cast Iron Floor Box – Fully Adjustable. [111mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour 2 7/16" (4) 1" [25mm], 34 1 3/4" [44mm] 1/2" [12.7mm] [62mm] 5 3/16" [132mm] 5 3/16" 880CM2-1 Two-Gang Shallow Cast Iron Floor Box – Fully Adjustable. [132mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour 2 7/16" (6) 1" [25mm], 76 1 3/4" [44mm] 1/2" [12.7mm] [62mm] 8 1/2" 36/40 [216mm] 5 3/16" 880CM3-1 Three-Gang Shallow Cast Iron Floor Box – Fully Adjustable. [132mm] TECHNICAL SPECIFICATIONS Cubic Inch Adjustment Adjustment Conduit Openings Capacity Before Pour After Pour (8) 1" [25mm], 118 1 3/4" [44mm] 1/2" [12.7mm] 2 7/16" 39/40/39 12 1/2" [62mm] [318mm] Cover Plates for OmniBox Series Floor Boxes provide access to a wide range of connectivity and are available in both metal and nonmetallic fabrications. 3 OmniBox Series Floor Boxes Cover Plate Flanges Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 817B One-Gang Brass or Brushed 827C Two-Gang Brass Carpet Flange – 818TCAL Aluminum Combination Carpet For use on 880S2, 880M2, and Tile Flange – Accepts 880CS2-1, and 880CM2-1 ® Ortronics MAB6TJ TracJack and Floor Boxes. MAB3S2 Series II adapters, Pass & 8 7/8" NOTE: Not available in Brushed ® 5 3/4" [225mm] Seymour Activate CM-MAB Aluminum finish. [146mm] adapters, and Wiremold CM Series inserts, sold separately. A B 837C Three-Gang Brass Carpet Flange – For use on 880S3, A B 880M3, 880CS32-1, and FLANGE Inches [mm] Inches [mm] 880CM3-1 Floor Boxes. 817B 6.080 [154.4] 5.060 [128.5] 13" 818TCAL 5.940 [150.9] 4.920 [125.0] NOTE: Not available in Brushed [330mm] 5 3/4" Aluminum finish. [146mm] NOTE: Brushed aluminum flanges come with beveled edges. 817T One-Gang Brass or Brushed 818TAL Aluminum Tile Flange – 827B Two-Gang Brass or Brushed For use on 880S1, 880M1, 828TCAL Aluminum Combination Carpet 880CS1-1, and 880M1-1 and Tile Flange – Accepts Floor Boxes. ® Ortronics MAB6TJ TracJack and A B MAB3S2 Series II adapters, Pass & ® Seymour Activate CM-MAB B A B adapters, and Wiremold CM Series FLANGE Inches [mm] Inches [mm] A inserts, sold separately. 817T 4.524 [107.0] 3.48 [88.4] 818TAL 4.550 [115.6] 3.530 [89.7] A B FLANGE Inches [mm] Inches [mm] 827T Two-Gang Brass or Brushed 827B 6.080 [154.4] 9.185 [233.3] 828TAL Aluminum Tile Flange – 828TCAL 5.940 [150.9] 9.045 [229.7] For use on 880S2, 880M2, 880CS2-1, and 880CM2-1 Floor Boxes. NOTE: Brushed aluminum flanges come with beveled edges. B A A B 837B Three-Gang Brass or Brushed FLANGE Inches [mm] Inches [mm] 838TCAL Aluminum Combination Carpet 827T 4.524 [114.9] 7.624 [193.7] and Tile Flange – Accepts 828TAL 4.550 [115.6] 7.655 [118.2] ® Ortronics MAB6TJ TracJack and MAB3S2 Series II adapters, Pass & 837T Three-Gang Brass or Brushed ® B Seymour Activate CM-MAB Aluminum Tile Flange – For use A adapters, and Wiremold CM on 880S3, 880M3, 880CS3-1, and Series inserts, sold separately. 880CM3-1 Floor Boxes. A B FLANGE Inches [mm] Inches [mm] 837B 6.080 [154.4] 13.310 [338.1] 11 3/4" 838TCAL 5.940 [150.9] 13.170 [334.5] [298mm] 4 1/2" [114mm] NOTE: Brushed aluminum flanges come with beveled edges. 838TAL-880S3 Kit – The 838TAL-880 Series 838TAL-880M3 flanges provide additional load 838TAL-880CS3 support for 3-gang tile flanges. 817C One-Gang Brass Carpet Flange – 838TAL-880CM3 Kit includes 838TAL Flange and For use on 880S1, 880M1, two support dividers. 11 3/4" 880CS1-1, and 880CM1-1 [298mm] Floor Boxes. NOTE: Order kit for specific box type: 880S3, 880M3, 5 3/4" NOTE: Not available in Brushed 4 3/4" 880CS3, or 880CM3. [146mm] [121mm] Aluminum finish. 4 1/2" [114mm] NOTE: UL Listed for tile, terrazzo, and carpet floors. All cover assemblies for the OmniB ox Floor Brass covers and flanges are not interchangeable with aluminum or nonmetallic cov- Box Series have ers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. TopGuard protection. 4 OmniBox Series Floor Boxes Cover Plate Flanges Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 817PCC-BLK One-Gang Nonmetallic 837PCC-BLK Three-Gang Nonmetallic 817PCC-BRN Carpet Flange – Available in black 837PCC-BRN Flange – Available in black or or brown. For Ortronics connectivity brown. For Ortronics connectivity use with 829PFLRT Cover. For use with 829PFLRT Cover. For Activate connectivity use with Activate connectivity use with ® ® 829PFL Cover. Accepts Ortronics 829PFL Cover. Accepts Ortronics MAB6TJ TracJack and MAB3S2 MAB6TJ TracJack and MAB3S2 5 3/4" ® ® 4 3/4" Series II adapters, Pass & Seymour Series II adapters, Pass & Seymour [146mm] [121mm] Activate CM-MAB adapters, and Activate CM-MAB adapters, and Wiremold CM Series inserts, sold Wiremold CM Series inserts, sold 13" separately. separately. [330mm] 5 3/4" [146mm] 827PCC-BLK Two-Gang Nonmetallic NOTE: UL Listed for tile, terrazzo, and carpet floors. 827PCC-BRN Carpet Flange – Available in black Brass covers and flanges are not interchangeable with or brown. For Ortronics connectivity aluminum or nonmetallic covers and flanges. Nonmetallic use with 829PFLRT Cover. For covers are interchangeable with aluminum flanges. Activate connectivity use with ® 829PFL Cover. Accepts Ortronics MAB6TJ TracJack and MAB3S2 ® Series II adapters, Pass & Seymour 8 7/8" Activate CM-MAB adapters, and 5 3/4" [225mm] Wiremold CM Series inserts, sold [146mm] separately. OmniBox Series Floor Boxes Metal Cover Plates Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 828DPGFITC Brass or Brushed Aluminum 828R Brass or Brushed Aluminum 828DPGFITCAL Rectangular Cover Plate – 828R-TCAL Duplex Cover Plate – Flip lids. Allows for mounting of a duplex Can also be used with a 106 style receptacle with a type communication adapter. rectangular style flip lid cover. B A B A A B A B COVER Inches [mm] Inches [mm] COVER Inches [mm] Inches [mm] 828R 3.156 [80.2] 4.182 [106.2] 828DPGFITC 3.156 [80.2] 4.182 [106.2] 828R-TCAL 3.290 [83.6] 4.310 [109.5] 828DPGFITCAL 3.290 [83.6] 4.310 [109.5] 828COMTC Brass or Brushed Aluminum 828GFITC Brass or Brushed Aluminum 828COMTCAL Communication Cover Plate – 828GFITCAL GFI Cover Plate – May be used Allows for up to four with Activate and Ortronics communication devices to be Connectivity Systems in mounted in a recessed position conjunction with 817B, 827B, within the 880 Floor Box. The and 837B Flanges. 828COM Cover Plate has B A removable slides for cable egress. A B A B COVER Inches [mm] Inches [mm] COVER Inches [mm] Inches [mm] 828GFITC 3.156 [80.2] 4.182 [106.2] 828COMTC 3.156 [80.2] 4.182 [106.2] 828GFITCAL 3.290 [83.6] 4.310 [109.5] 828COMTCAL 3.290 [83.6] 4.310 [109.5] NOTE: For use with 880S and 880CS Series Boxes only. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic All cover assemblies covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. for the OmniBox Floor Box Series have TopGuard protection. 5 OmniBox Series Floor Boxes Metal Cover Plates Ordering Information (Continued) Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 828DLR Brass or Brushed Aluminum 829CK-1 Brass Communication Cover 828DLRAL Single Locking Receptacle Plate – 2 5/8" and 1" [67mm and Cover Plate – Single flip lid cover 25mm] plugs. for 20A or 30A single locking receptacles. Device opening is 4.182" 2 5/8" [67mm]. For use with 3.156" [106.2mm] [80.2mm] maximum female locking device of 1.58" diameter, and maximum male 830CKTCAL-1 Brushed Aluminum Cover plug face of 2.25" diameter Plate – Power or communication plate with 2" [51mm] and 1" 830CKTCLAL Brushed Aluminum Single [25mm] plugs. Locking Receptacle Cover NOTE: Acceptable for use with Plate – Single screw plug 3.290" threaded conduit when pass- 4.310" cover for 20A or 30A single [83.6mm] [109.5mm] ing through power cables. locking receptacles. Screw plug opening is 2 5/8" [67mm]. For use 3.290" 829CK-3/4 Brass Communication Cover 4.310" with maximum female locking [83.6] [109.5] Plate – 2 5/8" and 3/4" [67mm device of 1.58" diameter, and and 19.1mm] plugs. maximum male plug face of 2.25" diameter. NOTE: Acceptable for use with 4.182" 3.156" threaded conduit when pass- [106.2mm] [80.2mm] ing through power cables. 830CKTCAL-3/4 Brushed Aluminum Cover Plate – Power or communication 828SPTC Brass Duplex Cover Plate – plate with 2" [51mm] and 3/4" Screw plugs. Screw plugs are [19.1mm] plugs. 1 1/2" [38mm] in diameter. NOTE: Acceptable for use with NOTE: Not available in Brushed 4 1/8" 3.290" threaded conduit when pass- Aluminum finish. 3 1/8" 4.310" [105mm] [83.6mm] ing through power cables. [79mm] [109.5mm] 829CK-1/2 Brass Communication Cover 829STC Brass Communication Cover Plate – 2 5/8" and 1/2" [67mm Plate – Data slides. Feed through and 12.7mm] plugs. only, not for use with a mounting plate for communication jacks. 4 1/8" NOTE: Not available in Brushed 3 1/8" [105mm] 4.182" 3.156" [79mm] Aluminum finish. [106.2mm] [80.2mm] 830CKTCAL-1/2 Brushed Aluminum Cover 829CK Brass Communication Cover Plate – Power or communication Plate – 2 5/8" and 2 1/4" [67mm plate with 2" [51mm] and 1/2" and 57mm] plugs. [12.7mm] plugs. NOTE: Acceptable for use with 4.182" threaded conduit when pass- 3.290" 3.156" [106.2mm] 4.310" [83.6mm] ing through power cables. [80.2mm] [109.5mm] 830CKTCAL Brushed Aluminum Cover 828MAAP A/V Adapter Plate – Sheet metal Plate – Power or communication adapter plate that accepts two (2) plate with 2" [51mm] and 1 1/4" ® Extron Electronics MAAP style [32mm] plugs. device plates (sold separately). For NOTE: Acceptable for use with use with 828GFITC or 828GFITCAL 3.290" 4.310" threaded conduit when pass- [83.6mm] cover plates. (Sold separately) [109.5mm] ing through power cables. *Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover plates are listed for tile, terrazzo, and carpet floors. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. 6 OmniBox Series Floor Boxes Nonmetallic Cover Plates Ordering Information Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications 828PR-BLK Nonmetallic Duplex Cover 829PFLRT-BLK Nonmetallic Communication 828PR-BRN Plate – Flip lids. Available in 829PFLRT-BRN Cover Plate – Individual flip black or brown. Can also be lids.* Available in black or brown. ® used with a 106 type Gasket included. Ortronics communication adapter. MAB6TJ TracJack and MAB3S2 Series II adapters included. 4 1/8" 4 1/8" 3 3/16" 3 3/16" [105mm] [105mm] [81mm] [81mm] 828PRGFI-BLK Nonmetallic GFI Cover 829PCK-BLK Nonmetallic Communication 828PRGFI-BRN Plate – Available in black or brown. 829PCK-BRN Cover Plate – Breakouts. ® May be used with Pass & Seymour Available in black or brown. ® Activate and Ortronics Connectivity Feed through only, not for systems in conjunction with 817, use with a mounting plate 827 and 837PCC Series flanges. for communication jacks. 4 1/8" 4 1/8" 3 3/16" 3 3/16" [105mm] [105mm] [81mm] [81mm] 829PFL-BLK Nonmetallic Communication 829PSTC-BLK Nonmetallic Communication 829PFL-BRN Cover Plate – Individual flip 829PSTC-BRN Cover Plate – Data slides. lids.* Available in black or brown. Available in black or brown. ® Gasket included. Pass & Seymour Feed through only, not for Activate CM-MAB adapter and use with a mounting plate Wiremold CM Series inserts for communication jacks. 4 1/8" included. 4 1/8" 3 3/16" [105mm] 3 3/16" [105mm] [81mm] [81mm] *Replacement flip lids can be ordered under Cat. No. PFL-BLK and PFL-BRN. Each Cat. No. comes with three flip lids. The above cover plates are listed for tile, terrazzo, and carpet floors. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Mounting Options for Connectivity Inserts Brass Cover Plate Mounting Option Nonmetallic Cover Plate Mounting Option 829PFL or 829PFLRT Cover 828GFITC Scrub Water Gasket MAB6TJ (Ortronics MAB6TJ (Ortronics TracJack Adapter, TracJack Adapter Sold Separately) Included with 829PFLRT Cover) MAB3S2 (Ortronics NOTE: 829PFL Cover MAB3S2 (Ortronics Series II Adapter, must remain open Series II Adapter Included Sold Separately) on some Pass & with 829PFLRT Cover) Seymour Activate inserts. CM-MAB CM-MAB (Pass & (Pass & Seymour Seymour Activate Activate Adapter, Adapter Included Sold Separately) with 829PFL Cover) 817B/ 818TCAL 817PCC Flange NOTE: The 828GFITC Cover must remain open on Pass & Seymour Activate and Ortronics inserts sold some connectivity inserts. separately. Mounting method typical for two- and three-gang Pass & Seymour Activate and Ortronics inserts sold versions. Part is scrub water approved for use on tile floors. separately. Mounting methods typical for two- and To maintain scrub water resistance, blank connectivity inserts three-gang versions. must be inserted in unused openings. 7 DATACOM CONNECTIVITY OPTIONS Now you have a wide range of options for providing datacom connectivity into Wiremold/Legrand Pathways. They are: ® ® • Ortronics TracJack and Series II Modular Connectivity Solutions ™ • Pass & Seymour Activate Modular Inserts • Open System Communication Modules ® Ortronics Connectivity ® TracJack Individual Jack System • Front-loading, snap-in design supports future moves adds and changes • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media • Flat or angled 45° exit configurations • Choice of 13 colors and color matched to Wiremold Systems • Universal T568A/B wiring format Series II Front-Loading, Module System • Module design features easy snap-in front-loading design • Linear 110 punch down format for easy termination • Inserts for voice, data, audio, and video • Available Category 3, 5e, 6, USOC 6-position, and other media • Available in flat or angled 45° exit configurations • Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com. Pass & Seymour Legrand Network Wiring ™ Activate Series Front-Loading Inserts • Modular inserts for voice, data, audio and video applications • Front-load, snap-in design • Color and texture matched to Wiremold Systems • Available Category 3, 5e, 6, as well as 6-position USOC • Universal T568A/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com. Open Connectivity Solutions Wiremold Open System Communications Modules • Accommodate a wide range of manufacturers’ communications outlets including keystone jacks, as well as proprietary solutions from Avaya (Systimax) and NORDX • Modules insert into a wide range of Wiremold Systems • Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold Applications Engineering Team or your local Wiremold Sales Representative. WIREMOLD U.S. and International: 60 Woodlawn Street • West Hartford, CT 06110 1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251 Canada: 570 Applewood Crescent • Vaughan, Ontario L4K 4B4 1-800-723-5175 • FAX 905-738-9721 © Copyright 2009 Legrand All Rights Reserved ED772R11 – Updated August 2009 – For latest specs visit www.wiremold.com