EBC-855 High Performance Industrial Fanless SBC EMBEDDED EBX COMPUTERS FEATURES ® ® l Intel ZCD 1GHz CPU or 1.8GHz Pentium M l Industrial operating temperature range -40°C to +70°C: 1.0GHz SBC without fan -40°C to +85°C: 1.0GHz SBC with fan ® -40°C to +70°C: 1.8GHz Pentium M SBC with fan l EBX-size board, 5.75" x 8.00" (146-mm x 203-mm) l Up to 1GB of system PC2700 DDR SDRAM supported in a 200-pin SODIMM socket l Type I and II CompactFlash cards supported ® l PC-compatible supports Linux, Windows XP embedded, plus other x86-compatible RTOS ® l Integrated graphics utilizing Intel Extreme Graphics 2 technology supports resolutions up to 2048 x 1536 l Simultaneous CRT and LVDS flat panel supported l Backlight power supported l Custom splash screen on start up l 10/100 Mbps Intel Ethernet controller l Four serial ports; two with RS-232/422/485 and two with only RS-232 interface l 48 bi-directional TTL digital I/O lines (WS16C48) l Bi-directional LPT port supports EPP/ECP l Four USB 2.0 ports l Two IDE ports with ATA100 for hard disk and CompactFlash memory storage l 3.5-inch floppy disk drive supported l 802.11a/b/g wireless supported via miniPCI socket l PC/104 and PC/104-Plus expansion connectors l Up to 300 second reset with watchdog timer l AT keyboard controller support l +5 volt only operation l AC97 Audio (six channel/5.1 surround sound) l Performance upgrade to WinSystems' EBC-BX l Real time clock and EBC-LP l Activity LEDs onboard for visual status l RoHS compliant l Two interrupt controllers and 7 DMA channels l Long-term product availability The EBC-855 is a highly integrated, single board FUNCTIONAL CAPABILITY computer (SBC) designed for rugged, performance driven applications. It operates over a temperature range of The EBC-855 is a full-featured, high-performance single -40° to +70° C without a fan and is designed for applica- board computer with a variety of on-board peripherals tions including industrial automation, security, which eliminate the need for additional standard I/O MIL/COTS, medical/diagnostic equipment, test and peripheral cards. It is based on the Intel's popular measurement, and transportation. 855GME chipset with the ICH4 communications con- troller and integrated Extreme Graphics 2 video 3D WinSystems' design is based upon chipsets from Intel's controller. The EBC-855 features an Intel 1GHz ® ® long life embedded road map to ensure longevity of the Celeron M-based ZC Dothan or 1.8GHz Pentium M core technology. processor. Both the CPU and system controller are sup- plied from Intel's Embedded Architecture Division for WinSystems' Applications Engineers are available to pro- long-term availability. It supports a maximum of 1GB of vide technical support with initial board selection and industry-standard PC2700 SDRAM, CompactFlash plus assistance during the design-in and production phase of support for IDE hard and 3.5" floppy disk drives. your project. ® The EBC-855 offers a full set of I/O interfaces including The 1.8GHz Pentium M processor is a 90 nm CPU that a 10/100BaseT Ethernet port (with remote boot and WOL offers very high-performance. It includes a 2MB L2 capability), VGA and dual channel LVDS flat panel cache on-chip. Operational temperature of the board with video, a miniPCI connector that supports an optional the 1.8GHz CPU is -40°C to +70°C with a fan. 802.11 wireless networking module, four USB 2.0 ports, four serial COM ports, AC97 audio (5.1 codec), LPT and It is important to note that these temperature figures are a PS/2 port for keyboard and mouse. Also onboard is a with no airflow across the board other than what the software programmable, 48-line digital I/O controller that onboard fan generates. Also, these operational tempera- provides input, output or output with readback for each ture specifications are at the full rated board speed. No I/O line. The board has PC/104 and PC/104-Plus automatic CPU clock speed reduction is necessary at connectors for support of additional off-the-shelf or user- elevated temperatures. The EBC-855 supports active fan designed specialty I/O modules. management. The fan is not turned on if the CPU is less than 55°C which extends fan life. Processor and Chipset - The EBC-855 is based upon the ® ® Intel 855GME GMCH and Intel ICH4. These chips are Power Management - The EBC-855 supports four ideal for embedded computing applications requiring standard power management modes to control and bring high-performance and full x86 Pentium compatibility. the power down on the board automatically. S0 is the full ® The EBC-855 features a low-power Intel ZC Dothan or power-on mode. S1 is the standby mode. Change of state ® Intel® Pentium M processor with up to 1GB of DDR of the keyboard, mouse, USB mouse and keyboard, wake 333MHz system memory. The Intel 855GME GMCH is on LAN or wake on Ring will wake the system up out designed, validated, and optimized for the Intel Pentium of Power On Suspend to Full On. S4 suspends to disk M and Intel Celeron M processors and associated micro before powering down. S5 turns all the power off (ATX architecture. mode only). ® ® Advanced Thermal Management - The processors are The BIOS supports the Enhanced Intel SpeedStep soldered directly to the EBC-855 and have an advanced technology enabling the processor to switch between mul- heat sink and thermal dissipation design. The heat sink tiple frequency and voltage points. This allows optimal material, fin size and density have been carefully engi- performance and the lowest power. It also supports the neered to provide a low thermal impedance interface so circuitry for catastrophic thermal protection. If detected, the that heat can be efficiently removed from the devices. Vcc supply to the processor is turned off to prevent permanent silicon damage due to thermal runaway. The 1GHz ZC Dothan is Intel's 90-nanometer (nm) process from its Celeron family of CPUs. It draws very Memory - The system memory bus is 64-bits wide with a low power (only 5.5W max.) which allows it to operate 400MHz front size bus. It operates at a speed of 333 MT/ from -40°C to +70°C without the need for a fan or the sec and uses Double Data Rate (DDR) synchronous necessity to slow down the CPU clock frequency. dynamic RAM. Up to 1Gbyte of non-registered, However, if a fan is added, then the upper limit of the unbuffered, PC2700 DDR SDRAM with gold plated operational temperature range is extended to +85°C fingers can be installed for the main systems memory. operating at 1GHz. The board is shipped from the factory with no memory installed. A 200-pin SODIMM connector permits the user to either install and/or upgrade the memory capacity in the field. WinSystems can supply the SODIMM200-G-27- 128, 256, -512, and -1G which are 128MB, 256MB, 512MB, and 1GB RoHS-compliant memory devices qualified for use on this board. CompactFlash - A connector is on the board that will accept Type I and II CompactFlash (CF) cards. The connector is wired to the IDE secondary controller. A designer can use CompactFlash cards as data storage for applications where the environment is too harsh for rotational hard disks or floppy disk drives while offering significant speed advantage. The EBC-855 can boot from The EBC-855-G-1.8-1 and EBC-855-1G-1 a CompactFlash device. units include fan and heatsink. WinSystems offers industrial-grade CompactFlash (CF) Video - The EBC-855 is based upon Intel's Extreme cards that provide operational SSD storage from -40° to Graphics 2 integrated graphics technologies that deliver +85°C for high capacity harsh embedded applications. 3D graphics with sharp images, fast rendering, smooth The sustained data transfer rate is very fast, plus an motion and extreme detail. Intel's Extreme Graphics 2 on-card wear leveling algorithm extends the number of supports the latest 2D and 3D APIs, delivering real- write cycles to the part. These RoHS-compliant cards will life environment and character effects. A 256-bit internal fit into any computer, SBC, or instrument with a CF path enables up to four textures per pixel on a single pass socket. www.industrialcompactflash.com for super light maps, atmospheric effects, and more realis- tic surface details. Flexible display capabilities enhance BIOS - The EBC-855 uses the Phoenix Trusted core the personal computing experience, offering significant BIOS. It supports advanced features such as custom benefits for applications requiring 32 bpp and higher dis- splash screen, APM 1.2 and ACPI 1.0b power manage- play resolution. ment modes, PXE boot and multi-language support. The BIOS also contols the fan speed and will turn the fan on and The EBC-855 supports both a dual LVDS flat panel off for the EBC-855-1.8G-1 and EBC-855-1G-1. interface as well as a standard analog SVGA interface simultaneously. The controller also will allow separate, The BIOS also supports legacy operation of a USB key- independent video to be displayed on LVDS and SVGA board and mouse, as well as booting from a USB displays. The video uses up to 64MB of system memory. floppy disk, USB keys, and other USB-connected mass A 350MHz DAC provides a resolution up to 1600 x 1200 storage devices. @ 85Hz or up to 2048 x 1536 @ 72Hz for both CRT and flat panels. The color depth for the flat panel is 18 bpp. The BIOS is located in an EEPROM that can be customized without removing the storage device from the Video Interface - The CRT video output signals are wired board. It will support diskless, keyboardless, and video- to a 14-pin dual-in-line connector at the edge of the board. less operation. Other customizable features such as a An optional CBL-234-1 interface cable adapts it to a stan- customer logo displayed during startup and customizable dard female 15-pin "D-Sub" type connector commonly BIOS setup parameters are supported. used for VGA. Simultaneous operation of the CRT and LCD is supported with two different video images can be Remote Booting - The EBC-855 supports remote booting displayed as well. This feature is equivalent to a second for use as a diskless network computer. Contact a video controller card onboard. WinSystems' Applications Engineer for companies that supply remote boot software. Floppy Disk Support - A 3.5" floppy disk drive is sup- ported by connecting it through the LPT interface. An optional CBL-308-G-1-1.5 is available from WinSystems to interface the 3.5" drive to the LPT connector. Alternatively, a USB floppy disk drive can be attached which also has legacy boot support. IDE Interface - The EBC-855 incorporates a fast IDE interface for hard disks, CompactFlash and other ATA-compatible devices. Each IDE device can have independent timings. The IDE interface supports PIO WinSystems’ Flat Panel Embedded PC IDE transfers up to 16 Mbytes/sec and Ultra ATA trans- fers up to 100 Mbytes/sec. The IDE interface integrates 16x32-bit buffers for optimal transfers. Flat Panel Display Support - The EBC-855 supports most flat panel display technologies. The board properly The IDE primary controller is wired to the 0.100" header sequences the power for logic voltage and the backlight while the secondary controller is wired to the 2-mm inverter to provide intelligent and safe power sequencing header and CompactFlash connector. An LED blinks to the panel. Please contact an WinSystems’ Applications automatically while data is transferred to provide visual Engineer or visit www.winsystems.com for the most status information. current listing. WinSystems uses a dual LVDS flat panel interface system Independent control of transmit, receive, line status, and that connects to different panel technologies and suppliers. It data set interrupts are on all channels. Each channel is has power, timing, and control signals for various panel types. setup to provide internal diagnostics such as loopback and The logic levels are 3.3 volts but are 5.0 volts tolerant. echo mode on the data stream. Plus an independent on-chip software programmable baud rate generator is Connectivity - The EBC-855 has both onboard and selectable from 50 through 115.2 kbits/sec. Modem hand- PC/104 module population options for wired and wireless shake control signals are supported for all channels. communications. One 10/100 Ethernet, four USB 2.0 ports, two RS-232/422/485 COM channels, and two All of the COM ports support RS-232 interface levels. RS-232 COM channels are standard connectivity features. The RS-232 drivers have an on-chip charge pump to gen- erate the plus and minus voltages so that the EBC-855 For wireless communications, this board supports a num- only requires +5 volts to operate. COM1 and COM2 also ber of plug-in modules. An onboard miniPCI socket allows have jumper selectable RS-422/485 support. The RS-422/ an 802.11 a/b/g card to be installed. A separate PC/104- 485 provides separate balanced transmit and receive Plus module is supported for either a GSM or CDMA signal pairs. For RS-485 multi-drop lines, one signal pair cellular modem. Another WinSystems' PC/104 module can be used for "party line" network structures. supports ZigBee-based communications. 802.11 Wireless - The EBC-855 is shipped with an empty 10/100 Ethernet - The board uses the MAC inside the miniPCI socket so the user can select and install their own Intel ICH4 controller plus a DA82562ET PHY to provide 802.11 cards from Intel, Broadcom, Foxconn (Atheros), a 10/100 Mbs wired Ethernet connection. The controller and others; or the EBC-855 can be populated with an ® is Intel 8255x-compatible for use with standard software Intel PRO/Wireless 2200BG card installed by drivers. It supports an IEEE 802.3 and 10BASE-T/ WinSystems. Normally 802.11 cards are automatically ® 100BASE-TX compliant physical layer with IEEE 802.3u recognized by operating systems such as Windows XP. Auto-Negotiation support and Wake On LAN. There are Also, the individual miniPCI card manufacturer will three LEDs on board that provide status information. The typically supply drivers. Please contact the card’s manu- red LED indicates 100BaseT, the yellow indicates Link, facturer directly for their supported operating systems. and the green is the Rx/Tx data. An optional Intel PRO/Wireless 2200BG card can be USB 2.0 - The EBC-855 supports four USB 2.0 ports that supplied by WinSystems. It is a standards-based and Wi- comply with the Universal Serial Bus Specification Fi Certified wireless local area network (WLAN) solution revision 2.0 and Open Host Controller Interface (OHCI) that allows up to 54 million bits of data to be transferred Specification for full-/low-speed signaling and Intel's per second. It is designed to maintain high throughput at Enhanced Host Controller Interface (EHCI) Specification longer ranges depending upon the type of antenna used. for high-speed signaling. The Intel PRO/Wireless 2200BG is also software Each port has overcurrent and in-rush protection provided upgradeable to provide future security and other service by a National Semiconductor LM3526 power switch. enhancements. The Intel PRO/ Wireless 2200BG network Each device is a dual stage design including a thermal connection fully supports today's security standards such protection circuit. During a short-circuit/over-current as Wi-Fi Protected Access (WPA) and can be upgraded event, the switch dissipating excessive heat is turned off, via software downloads as future security standards such allowing the second switch to continue to function as 802.11i become available. uninterrupted. Therefore, a fault on one channel will not affect the other. No fuses are required since protection is 48-line parallel I/O - The EBC-855 contains a highly done electronically by the circuit. versatile WS16C48 digital I/O controller. Each I/O line is individually programmable for input, output, or output The four USB ports are wired to two, 8-pin 2-mm with read-back operation. Each output channel is latched connectors. The CBL-275-2 is the optional interface and has an open collector driver (with a pull-up resistor) cable adapter that has two standard female USB connectors. capable of sinking 12mA of current. Serial Communications - Four independent, full-duplex, The major feature of this controller is its ability to moni- RS-232 serial asynchronous channels are onboard. All tor all 24 of the 48 lines for both rising and falling digital serial channels are configured as Data Terminal edge transitions, latch them and then interrupt the proces- Equipment (DTE). Both the send and receive registers of sor notifying it that a change-of-input status has occurred. each channel has a 16-byte FIFO. This device is a dual Transition polarity is programmable and enabled on a bit- 16C550 compatible UART that offers software compati- by-bit basis. Each line's transition is latched by the event bility with PC-type driver programs. so that even short duration pulses will be recognized. An interrupt ID register is maintained for each line for information is stored in its CMOS RAM which can be writing more efficient Interrupt Service Routines. This is battery backed up by using WinSystems' optional battery an efficient way of signaling the CPU of real-time events pack that is plugged into the EBC-855. The battery is without the burden of polling the digital I/O points. a 1600 mAH 3.6V unit that works from -40° to +85° C. The EBC-855 has its I/O lines connected to two, 50-pin Watchdog Timer - A software enabled, retriggerable connectors. Twenty-four data lines are alternated with watchdog timer is provided. The timeout period is 24 ground lines for reduced noise and crosstalk. Also software adjustable with options of 30 or 300 seconds +5 volts and ground are included in the cable. The pinout available from the CMOS set up for boot. If enabled, it is compatible with the industry standard 4 to 24 position must be updated at least once during the period otherwise I/O module mounting racks (Dataforth, Opto-22, etc.) for a failure is assumed and the board will be reset. This use with high-level AC and DC optically isolated solid circuit is important for use in remote and unattended state relays. An optional CBL-115-4, 50-pin conductor applications. ribbon cable connects the EBC-855 to one I/O rack. Speaker - An onboard speaker is available for sound Line Printer Port - The EBC-855 has a parallel port that generation. A beep code is generated that corresponds to may be operated in standard (SPP) bi-directional as well any BIOS error codes (if required) during the power up or as Extended Capabilities Port (ECP - IEEE-1284) and reset sequence Enhanced Parallel Port (EPP) modes. The output drivers can support 14mA per line. Power - Power is supplied to the board through a 9-pin Molex connector. Both ±12 volts are wired directly to The printer port can also be used as two additional the PC/104 and PC/104-Plus connector. The +12V is also general-purpose I/O ports or the floppy disk drive wired to the switch for the panel back light control. The interface if a printer is not required. The first port can be ±12V power is not used on the board. Signaling is supplied configured as 8 input or output only lines. The other port through a separate 4-pin connector. can be configured as 5 input and 3 output lines. Power Management - The EBC-855 supports ACPI and AC97 Audio - The EBC-855 has an AC97 digital audio APM power management modes S1 and S4. controller that supports 5.1 surround sound. An 18-pin, 2-mm connector provides access to Line Out, stereo Reset - A precision voltage monitors the +5 volt status. Audio In, and stereo Microphone In. Upon detection of an out-of-tolerance condition, the board is reset. This action is critically important in order to Keyboard/Mouse Controller - An 80C42-type controller detect brownout or power fail conditions. The reset supports a PC/AT-compatible keyboard. Also, a standard circuit also ensures that the power is nominal before PS/2 mouse is supported through a separate I/O cable. executing a power-on reset. The mouse and keyboard also can be attached via the USB cable if the operating system you choose supports this feature. Battery - An optional off-board battery supplies the EBC-855 board with standby power for the real time clock Interrupts - Two 82C59A compatible interrupt con- and CMOS setup RAM. The power supervisory circuit sens- trollers accept inputs from the onboard peripherals and es the off-board voltage and automatically switches to inter- the PC/104 bus for a total of twelve software selectable nal power when it drops below normal. interrupt sources. Four PCI interrupt sources are support- ed on the PC/104-Plus bus which are PnP-compliant. The board will operate without a battery since there is an Also an APIC interrupt controller is included for operating EEPROM on board to store the CMOS set up data. systems that support APIC functionality. However, current time and date information would not be maintained when the main +5V power is not present. Status LED - A green status LED is also available to monitor system activity. Under a user's program control, Replacement for WinSystems’ SBCs - The EBC-855 it can indicate error conditions or blink different patterns is designed to be an upgrade and high-performance to provide a visual indication of system status. replacement for current users of WinSystems' EBC-BX and EBC-LP. For questions about any differences in the Real Time Clock - An MC146818A-compatible clock boards or new software drivers that may be needed, please supports a number of features including periodic and contact the factory. alarm interrupt capabilities. The time and date keeping Engineering Support - WinSystems provides free Developer Kits - WinSystems’ Developer Kits provide technical phone support to assist customers with system the necessary hardware, software and cables to begin integration of our SBCs and I/O modules. program development with the EBC-855 board. The kit's packaging permits easy access to the SBC, PC/104 mod- Long-Life Availability - This board is based on chipsets ules and peripherals during program development. The from Intel's long life embedded roadmap to ensure kit consists of a DVD-ROM drive, floppy disk drive, hard longevity of the core technology. disk drive and power supply mounted in a black, light- weight, aluminum enclosure. Also included is the select- PC/104 Expansion - The EBC-855 has both a 16-bit PC/ ed operating system, cables, and the PCM-POST, a 104 and a 32-bit PC/104-Plus interface and connector. PC/104 module, for debugging support. PC/104 is electrically equivalent to the ISA bus and PC/104-Plus is equivalent to the PCI bus for I/O Board Support Packages for select operating systems functions requiring higher data transfer speeds. are also available with our Developer Kits. Currently Windows XP embedded, Linux and DOS/Sockets OS are The EBC-855 provides a common computer core from supported. Additional support may be offered for other which engineers can add off-the-shelf or user-designed, operating systems. Please contact a WinSystems' application-specific PC/104 and PC/104-Plus modules. Applications Engineer if you need support for an OS that PC/104 modules are self-stacking and plug together in is not listed above. a "piggy back" configuration to serve as a mezzanine expansion bus. In general, Developer Kits provide a specific OS "sample image" that is preloaded on a Flash disk making it ready PC/104 modules are very compact, measuring only 3.6 x 3.8 to run right out of the box. Most kits also include Quick inches, and are offered by WinSystems and a number of third Start Guides, documentation designed to lead you through party companies worldwide. Module functions include the process of recreating the embedded OS sample image communications specialty serial I/O, digital I/O, analog I/O, that was provided in the kit. These Quick Start Guides GPS, GSM or CDMA cellular modems, ZigBee, SCSI, provide a wealth of valuable, time-saving information etc. More PC/104 information including white papers, that will help you quickly overcome a large portion of products, and specifications are on our web site at the learning curve if you are new to a particular operating http://pc104.winsystems.com/products/pc104/index.html. system. Please visit the Developer Section of our website for more details about each individual Developer Kit Enclosure - The EBC-855 can be housed in a low-cost enclosure designed specifically for EBX-based single SPECIFICATIONS board computers. The interior of the ENC-EBC-1000 enclosure is large enough to install any PC/104 modules, Electrical even modules with latching I/O connectors. EBC-855 CPU Clock: 1GHz w/Intel Celeron ZCD or ® 1.8GHz with Intel Pentium M This lightweight, durable aluminum enclosure allows a designer to package a variety of system configurations PC/104 Interface:16-bit, non-stackthrough quickly and easily. The ENC-EBC-1000 can be attached PC/104-Plus Interface: 32-bit PCI, non-stackthrough vertically on a wall, on a table, under a counter or inside Ethernet: 10/100 Mbits/second with RJ-45 a larger piece of equipment. For additional information connector please visit the ENC-EBC-1000 product page or contact a USB 2.0: Four ports with overcurrent protection WinSystems' application engineer. Serial Interface: Four serial channels, all have RS-232 levels; two channels also support RS-422/485 SOFTWARE 802.11: User installed miniPCI card supported Audio: AC97 with MIC, six speakers and Line In The EBC-855 is an x86-compatible SBC. It is designed LPT Interface: Bidirectional LPT with ECP/EPP to run both 16-bit and 32-bit x86 instruction set software Parallel Interface: 48 I/O lines, TTL compatible ® and is compatible with Microsoft's Windows XP embed- EIDE Interface: Supports two drives ded operating systems as well as the applications that Floppy Disk Interface: Supports one 1.44M drive run on them. It also supports Linux and many other Keyboard: Standard PS/2 or USB interface PC-compatible x86 operating systems such as DOS, Mouse: Standard 5-pin or USB interface QNX, VxWorks, or other real-time executives that require Vcc = +5V ±5% at 2.1A typical @ 1GHz a PC hardware environment +5V ±5% at 4.25A typical @ 1.8GHz System Memory ORDERING INFORMATION Addressing: Up to 1Gbyte 200-pin SDRAM ® (supplied and installed by user) EBC-855-G-1.8G-1: 1.8GHz Pentium M SBC w/ fan EBC-855-G-1G-0: 1.0GHz Intel ZC Dothan SBC Solid State Disk EBC-855-G-1G-1: 1.0GHz Intel ZC Dothan SBC w/fan CompactFlash: Socket supports Type I and Type II CompactFlash devices Developer Kits DV-S-327-L20 Linux (2.6 kernel) Developer Kit, Mechanical includes software, hardware, Dimensions: 5.75" x 8.0" enclosure, and cables (147-mm x 203-mm) DV-S-327-XP-SP2 Windows XPe Developer Kit, includes Jumpers: 2-mm square post compatible includes software, hardware, enclosure, and cables I/O Connectors Serial, Parallel, Keyboard: 50-pin on 0.100" grid System Memory - DDR PC2700 SDRAM COM 3 and 4: 20-pin on 0.100" grid SODIMM200-G-27-128 128Mbyte RoHS compliant Floppy Disk Interface: USB or LPT interface SODIMM200-G-27-256 256Mbyte RoHS compliant EIDE Interface: 40-pin on 0.100" grid (Primary) SODIMM200-G-27-512 512Mbyte RoHS compliant 44-pin on 2-mm grid (Primary) SODIMM200-G-27-1G 1028Mbyte RoHS compliant 50-pin 2-mm CFlash connector Parallel I/O: Two, 50-pin on 0.100" grid -40°C to +85°C Industrial CompactFlash Memory CRT: 14-pin on 2-mm grid CFLASH-G-128M-I 128MB CFlash - RoHS compliant LVDS: Two, 20-pin on 0.100" grid CFLASH-G-256M-I 256MB CFlash - RoHS compliant Ethernet: RJ-45 CFLASH-G-512M-I 512MB CFlash - RoHS compliant PC/104 Bus: 64-pin 0.100" socket CFLASH-G-1024M-I 1GB CFlash - RoHS compliant 40-pin 0.100" socket CFLASH-G-2048M-I 2GB CFlash - RoHS compliant PC/104-Plus: 120-pin (4 x 30; 2-mm) stackthrough CFLASH-G-4096M-I 4GB CFlash - RoHS compliant with shrouded header CFLASH-G-8192M-I 8GB CFlash - RoHS compliant USB: Two, 8-pin 2-mm Audio: 18-pin, 2-mm Cables PS/2 Mouse: 5-pin in-line Molex CBL-115-4 Opto rack interface cable, 4 ft. Main Power: 9-pin in-line Molex CBL-126-G-10-2 ATA100 IDE disk cable ATX Control Signals: 4-pin in-line Molex CBL-308-G-1-1.5 3.5-inch” floppy drive to LPT Fan Power: 3-pin in-line Molex interface cable External Battery: 3-pin in-line Molex CBL-SET-327-1 Cable set for the EBC-855 Backlight Power: 4-pin in-line Molex CBL-173-G-1-1 20-pin ribbon to two, 9-pin male D (COM3 and COM4) adapter cable Operating Temperature: CBL-225-G-1-0.3 PS/2 mouse adapter cable EBC-855-1.8G-1: -40°C to +70°C (with fan) CBL-234-G-1-1 14-pin ribbon to 15-pin D-sub EBC-855-1G-0: -40°C to +70°C (without fan) CRT adapter cable EBC-855-1G-1: -40°C to +85°C (with fan) CBL-236-G-2-1 Unterminated power cable Non-condensing relative humidity: 5% to 95% CBL-247-G-1-1 Multi-I/O adapter cable, 1 ft. CBL-270-G-2-1 Stereo audio cable WinSystems reserves the right to make changes to products CBL-275-G-2-0.50 Dual USB to 8-pin, 2-mm cable and/or documentation without further notification. Wireless Development Kit Product names of other companies may be trademarks of their KIT-SBC-WIRELESS-1 Kit includes a wireless module, respective companies. antenna, and cable Enclosure ENC-EBC-1000 Enclosure for an EBX SBC Optional Battery BAT-LTC-E-36-16-1 External 3.6V, 1600 mAH battery with plug-in connector 715 Stadium Drive • Arlington, Texas 76011 • (817) 274-7553 • http://www.winsystems.com