First incorporated in August of commitment to quality; quality of control, offer excellent product 1948, Wilkerson manufactures a products, services and people. knowledge, technical assistance complete line of compressed air Our dedication to the total quality and local inventory. As a result of treatment and control products to management process assures our representing other complimentary meet a wide variety of industrial, customers that we can consistently products, they are able to satisfy process, consumer and health provide the highest levels of product their customers’ total requirements. care applications. Today, Wilkerson quality and customer service Today’s broad line of Wilkerson serves over 500 different industries required to meet their needs. products is the result of throughout the world. From the very beginning, Wilkerson continuing product innovations Over the years, Wilkerson facilities, has sold its products through a and technology advancements manufacturing and engineering world-wide, independent distributor which frequently become industry technology have kept pace with network. We currently have 200 standards. Wilkerson is dedicated increased sales volume, the growing distributors throughout North to designing and manufacturing need to satisfy customers’ specific America, plus an expanding network innovative products with features requirements and the demands of international distributors in over and operating characteristics that placed on production. 40 countries. Our distributors, who meet customer requirements for have many years of experience quality, performance, reliability, Wilkerson’s growing leadership in in compressed air treatment and serviceability, safety and value. the industry is due to our determined       WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from The Company, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by The Company and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by The Company, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document “Offer of Sale”. © Copyright 2011, 2008, 2003 Parker Hannifin Corporation. All Rights Reserved. Filters, Regulators, Lubricators Catalog 9EM-TK-190-3 Basic 1/8" Body = “Most Popular” Regulator Specifications 3 Flow Capacity* 1/8 29.2 SCFM (13.5 dm /s) R08 3 1/4 44.0 SCFM (18.9 dm /s) Adjusting Range Pressure 0 to 30 PSIG (0 to 2.1 bar) 0 to 60 PSIG (0 to 4.1 bar) 0 to 125 PSIG (0 to 8.6 bar) Gauge Port (2 ea.)** NPT 1/8 Maximum Supply Pressure 300 PSIG (20.7 bar) Relieving B † Operating Temperature -4° to 150°F (-20° to 65.5°C) Port Size NPT / BSPP-G 1/8, 1/4 Weight lb. (kg) .66 (0.3) * Inlet pressure 100 PSIG (6.9 bar). Secondary pressure 90 PSIG (6.2 bar). ** Non-gauge option only. † Units with square gauges: -15°C to 65.5°C (5°F to 150°F) Non-Relieving R08-01-F0G0 R08-01-F000 Materials of Construction Features Adjustment Knob Acetal Body Zinc • Balanced Valve Design Body Cap ABS • 2 Gauge Ports Bonnet PBT • Serviceability and Ease of Maintenance Bottom Plug 33% Glass-Filled Nylon • Unique Flush-mounted Pressure Gauge Diaphragm Assembly Brass / Nitrile • Light Weight Panel Nut Acetal • Modern Design and Appearance Seals Nitrile Springs Steel Valve Assembly Brass / Nitrile ! WARNING A B B Product rupture can cause serious injury. Do not connect regulator to bottled gas. Do not exceed maximum primary pressure rating. C C 80 100 40 F 0 160 psi CAUTION: E REGULATOR PRESSURE ADJUSTMENT – The working D D range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and R08-XX-F0G0 R08-XX-F000 limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set NOTES: Flush mounted gauge kits will not fit units originally purchased with threaded gauge ports. by increasing the pressure up to the desired setting. 1.25" Dia. (31.7 mm) hole required for panel nut mounting. Dimensions Inches Models A B C D E F (mm) Standard Unit 1.58 1.58 1.34 2.60 3.94 2.40 (40) (40) (34) (66) (100) (61) R08-XX-F000 With Gauge 1.58 2.53 1.34 2.60 3.94 2.40 (40) (64) (34) (66) (100) (61) R08-XX-F0G0 Pneumatic Division B102 Richland, Michigan www.wilkersoncorp.com Catalog 9EM-TK-190-3 Compact Modular Regulator R08 = “Most Popular” Replacement Kits R08-01-F000 Diaphragm Assembly – Inlet Pressure = 100 PSI (6.9 bar) Non-relieving ........................................................ GRP-96-726 7.0 100 Relieving ............................................................... GRP-96-725 6.0 Spring, Regulating – 80 5.0 0 to 30 PSIG (0 to 2.1 bar) .................................... GRP-95-111 0 to 60 PSIG (0 to 4.1 bar) ....................................GRP-96-718 60 4.0 0 to 125 PSIG (0 to 8.6 bar) ..................................GRP-96-717 3.0 40 B Valve Assembly .........................................................RRP-96-727 2.0 Valve Spring ..............................................................RRP-96-728 20 1.0 Accessories 0 0 0 10 20 30 40 SCFM Adjusting Knob .................................................. RRP-16-005-000 3 Bottom Plug ....................................................... RRP-16-383-000 0 3 6 9 12 15 18 21 24 27 dm /s AIR FLOW RATE Gauge Adapter Block, 1/4" NPT, ..............................GPA-97-037 Replaces Flush Mount Gauge Panel Mount Nut – Aluminum ...............................................................RPA-96-733 Plastic ....................................................................RPA-96-734 Pressure Gauge, Flush Mounted – 0 to 150 PSIG .....................................................K4511SCR150 0 to 60 PSIG ...................................................... K4511SCR060 0 to 11 bar ...........................................................K4511SCR11B Pressure Gauge, 0 to 60 PSIG (0 to 4.1 bar), 1-1/2" Dial Face, 1/8 NPT, CBM ......................... K4515N18060 Pressure Gauge, 0 to 160 PSIG (0 to 11.0 bar), 1-1/2" Dial Face, 1/8 NPT, CBM ..........................K4515N18160 R08-02-F000 Tamper Resistant Kit .................................................RPA-96-735 Inlet Pressure = 100 PSI (6.9 bar) Wall Mounting Bracket – 7.0 100 C-Type ................................................................... GPA-97-010 6.0 L-Type ................................................................... GRP-96-739 80 T-Type ....................................................................GPA-96-737 5.0 60 4.0 3.0 40 2.0 20 1.0 0 0 SCFM 0 10 20 30 40 50 60 3 dm /s 0 3 6 9 12 15 18 21 24 27 AIR FLOW RATE Ordering Information With Gauge With Gauge With Gauge Without Gauge Without Gauge Without Gauge Model Port 0 to 125 PSIG 0 to 30 PSIG 0 to 60 PSIG 0 to 125 PSIG 0 to 30 PSIG 0 to 60 PSIG Type Size (0 to 8.6 bar) (0 to 2.1 bar) (0 to 4.1 bar) (0 to 8.6 bar) (0 to 2.1 bar) (0 to 4.1 bar) 1/8 R08-01-F0G0 R08-01-C0G0 R08-01-D0G0 R08-01-F000 R08-01-C000 R08-01-D000 Relieving 1/4 R08-02-F0G0 R08-02-C0G0 R08-02-D0G0 R08-02-F000 R08-02-C000 R08-02-D000 1/8 R08-01-R0G0 R08-01-P0G0 R08-01-W0G0 R08-01-R000 R08-01-P000 R08-01-W000 Non-relieving 1/4 R08-02-R0G0 R08-02-P0G0 R08-02-W0G0 R08-02-R000 R08-02-P000 R08-02-W000 Options - To order an option supplied with the unit model, add the appropriate coded suffix letter in the designated position of the model number. Pneumatic Division B103 Richland, Michigan www.wilkersoncorp.com SECONDARY PRESSURE SECONDARY PRESSURE bar bar PSIG PSIG Filters, Regulators, Lubricators Safety Guidelines Catalog 9EM-TK-190-3 Safety Guidelines Safety Guide For Selecting And Using Pneumatic Division Products And Related Accessories WARNING: ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF PNEUMATIC DIVISION PRODUCTS, ASSEMBLIES OR RELATED ITEMS (“PRODUCTS”) CAN CAUSE DEATH, PERSONAL INJURY, AND PROPERTY DAMAGE. POSSIBLE CONSEQUENCES OF FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THESE PRODUCTS INCLUDE BUT ARE NOT LIMITED TO: • Unintended or mistimed cycling or motion of machine members or failure to cycle • Work pieces or component parts being thrown off at high speeds. • Failure of a device to function properly for example, failure to clamp or unclamp an associated item or device. • Explosion • Suddenly moving or falling objects. • Release of toxic or otherwise injurious liquids or gasses. Before selecting or using any of these Products, it is important that you read and follow the instructions below. 1. GENERAL INSTRUCTIONS 1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division Valves, FRLs (Filters pressure Regulators and Lubricators), Vacuum products and related accessory components. 1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons or property. 1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see: ISO 4414:1998, Pneumatic Fluid Power – General Rules Relating to Systems. See www.iso.org for ordering information. 1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs or Vacuum products. Do not select, or use Wilkerson valves, FRLs or vacuum products without thoroughly reading and understanding this safety guide as well as the specific Wilkerson publications for the products considered or selected. 1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Wilkerson and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through its own analysis and testing, is solely responsible for: • Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory. • Assuring that all user’s performance, endurance, maintenance, safety, and warning requirements are met and that the application presents no health or safety hazards. • Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which the valves, FRLs or Vacuum products are used; and, • Assuring compliance with all applicable government and industry standards. 1.6. Safety Devices: Safety devices should not be removed, or defeated. 1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured. 1.8. Additional Questions: Call the appropriate Wilkerson technical service department if you have any questions or require any additional information. See the Wilkerson publication for the product being considered or used, or call 269-629-2550, or go to www.wilkersoncorp.com, for telephone numbers of the appropriate technical service department. 2. PRODUCT SELECTION INSTRUCTIONS 2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system. System components need to be able to provide adequate flow and pressure for the desired application. 2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the instruction sheets supplied for maximum pressure ratings. 2.3. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product and result in complete product failure. 2.4. Environment: Many environmental conditions can affect the integrity and suitability of a product for a given application. Pneumatic Division products are designed for use in general purpose industrial applications. If these products are to be used in unusual H circumstances such as direct sunlight and/or corrosive or caustic environments, such use can shorten the useful life and lead to premature failure of a product. 2.5. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there is any possibility of synthetic oils or greases migrating into the pneumatic components check for compatibility with the seal materials used. Consult the factory or product literature for materials of construction. 2.6. Polycarbonate Bowls and Sight Glasses: To avoid potential polycarbonate bowl failures: • Do not locate polycarbonate bowls or sight glasses in areas where they could be subject to direct sunlight, impact blow, or temperatures outside of the rated range. • Do not expose or clean polycarbonate bowls with detergents, chlorinated hydro-carbons, keytones, esters or certain alcohols. • Do not use polycarbonate bowls or sight glasses in air systems where compressors are lubricated with fire resistant fluids such as phosphate ester and di-ester lubricants. Pneumatic Division H2 Richland, Michigan www.wilkersoncorp.com Catalog 9EM-TK-190-3 Safety Guidelines 2.7. Chemical Compatibility: For more information on plastic component chemical compatibility see Pneumatic Division technical bulletins Tec-3, Tec-4, and Tec-5 2.8. Product Rupture: Product rupture can cause death, serious personal injury, and property damage. • Do not connect pressure regulators or other Pneumatic Division products to bottled gas cylinders. • Do not exceed the maximum primary pressure rating of any pressure regulator or any system component. • Consult product labeling or product literature for pressure rating limitations. 3. PRODUCT ASSEMBLY AND INSTALLATION INSTRUCTIONS 3.1. Component Inspection: Prior to assembly or installation a careful examination of the valves, FRLs or vacuum products must be performed. All components must be checked for correct style, size, and catalog number. DO NOT use any component that displays any signs of nonconformance. 3.2. Installation Instructions: Wilkerson published Installation Instructions must be followed for installation of Wilkerson valves, FRLs and vacuum components. These instructions are provided with every Wilkerson valve or FRL sold, or by calling 269-629-2550, or at www.wilkersoncorp.com. 3.3. Air Supply: The air supply or control medium supplied to Valves, FRLs and Vacuum components must be moisture-free if ambient temperature can drop below freezing 4. VALVE AND FRL MAINTENANCE AND REPLACEMENT INSTRUCTIONS 4.1. Maintenance: Even with proper selection and installation, valve, FRL and vacuum products service life may be significantly reduced without a continuing maintenance program. The severity of the application, risk potential from a component failure, and experience with any known failures in the application or in similar applications should determine the frequency of inspections and the servicing or replacement of Pneumatic Division products so that products are replaced before any failure occurs. A maintenance program must be established and followed by the user and, at minimum, must include instructions 4.2 through 4.10. 4.2. Installation and Service Instructions: Before attempting to service or replace any worn or damaged parts consult the appropriate Service Bulletin for the valve or FRL in question for the appropriate practices to service the unit in question. These Service and Installation Instructions are provided with every Wilkerson valve and FRL sold, or are available by calling 269-629-2550, or by accessing the Wilkerson web site at www.wilkersoncorp.com. 4.3. Lockout / Tagout Procedures: Be sure to follow all required lockout and tagout procedures when servicing equipment. For more information see: OSHA Standard – 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy – (Lockout / Tagout) 4.4. Visual Inspection: Any of the following conditions requires immediate system shut down and replacement of worn or damaged components: • Air leakage: Look and listen to see if there are any signs of visual damage to any of the components in the system. Leakage is an indication of worn or damaged components. • Damaged or degraded components: Look to see if there are any visible signs of wear or component degradation. • Kinked, crushed, or damaged hoses. Kinked hoses can result in restricted air flow and lead to unpredictable system behavior. • Any observed improper system or component function: Immediately shut down the system and correct malfunction. • Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations. Caution: Leak detection solutions should be rinsed off after use. 4.5. Routine Maintenance Issues: • Remove excessive dirt, grime and clutter from work areas. • Make sure all required guards and shields are in place. 4.6. Functional Test: Before initiating automatic operation, operate the system manually to make sure all required functions operate properly and safely. 4.7. Service or Replacement Intervals: It is the user’s responsibility to establish appropriate service intervals. Valves, FRLs and vacuum products contain components that age, harden, wear, and otherwise deteriorate over time. Environmental conditions can significantly accelerate this process. Valves, FRLs and vacuum components need to be serviced or replaced on routine intervals. Service intervals need to be established based on: • Previous performance experiences. • Government and / or industrial standards. • When failures could result in unacceptable down time, equipment damage or personal injury risk. 4.8. Servicing or Replacing of any Worn or Damaged Parts: To avoid unpredictable system behavior that can cause death, personal injury and property damage: • Follow all government, state and local safety and servicing practices prior to service including but not limited to all OSHA Lockout Tagout procedures (OSHA Standard – 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy – Lockout / Tagout). • Disconnect electrical supply (when necessary) before installation, servicing, or conversion. • Disconnect air supply and depressurize all air lines connected to system and Pneumatic Division products before installation, service, or H conversion. • Installation, servicing, and / or conversion of these products must be performed by knowledgeable personnel who understand how pneumatic products are to be applied. • After installation, servicing, or conversions air and electrical supplies (when necessary) should be connected and the product tested for proper function and leakage. If audible leakage is present, or if the product does not operate properly, do not put product or system into use. • Warnings and specifications on the product should not be covered or painted over. If masking is not possible, contact your local representative for replacement labels. 4.9. Putting Serviced System Back into Operation: Follow the guidelines above and all relevant Installation and Maintenance Instructions supplied with the valve FRL or vacuum component to insure proper function of the system. Pneumatic Division H3 Richland, Michigan www.wilkersoncorp.com Safety Guidelines Safety Guidelines Catalog 9EM-TK-190-3 Safety Guidelines Some of the Materials that will Attack Warning: Use Limitations Polycarbonate Plastic Bowls Wilkerson's warranties are void, and Wilkerson assumes no Acetaldehyde Chloroform Milk of Lime (CaOH) responsibility for any resulting cost, loss, injury or any other damages Acetic acid (conc.) Cresol Nitric Acid (conc.) whatsoever, with respect to any plastic bowl unit for which a bowl Acetone Cyclohexanol Nitrobenzene guard is standard equipment if the unit is placed in service without Acrylonitrile Cyclohexanone Nitrocellulose Lacquer the bowl guard and, except as otherwise specified in writing by Ammonia Cyclohexene Phenol Wilkerson, with respect to any Wilkerson products which are used in Ammonium Fluoride Dimethyl Formamide Phosphorous Hydroxy other than compressed air service. Specific warnings with respect to Ammonium Hydroxide Diozane Chloride these and other use limitations appear elsewhere in this catalog. Ammonium Sulfide Ethgane tetrachloride Perchlorethylene Wilkerson maintains a policy of ongoing product development Anaerobic adhesives Ethyl Acetate Phosphorous and improvement. We therefore reserve the right to change Trichloride and Sealants Ethyl Ether Propionic Acid dimensions specification and design without notice. Antifreeze Ethylamine Pyridine Do not place plastic bowl unit in service without bowl guard Benzene Ethylene Chlorohydrin Sodium Hydroxide installed. Benzoic Acid Ethylene Dichloride Sodium Sulfide Benzyl Alcohol Ethylene Glycol Styrene Plastic bowl units are sold only with bowl guards with the exception Brake Fluids Formic Acid (conc.) Sufuric Acid (conc.) to miniature units (C04, F00, L00, & M00). To minimize the danger Bromobenzene Freon (Refrig. & Propell.) Sulphural Chloride of flying fragments in the event of plastic bowl failure, the bowl Butyric Acid Gasoline (High Aromatic) Tetrahydronaphthalene guards should not be removed. If the unit is in service without the Carbolic Acid Hydrazine Tiophene bowl guard installed, manufacturer's warranties are void, and the Carbon Disulfide Hydrochloric Acid (conc.) Toluene manufacturer assumes no responsibility for any resulting loss. Carbon Tetrachloride Lacquer Thinner Turpentine If the unit has been in service and does not have a bowl guard, Caustic Potash Solution Methyl Alcohol Xylene & Others order one and install before placing back in service. Caustic Soda Solution Methylene Chloride Chlorobenzene Methylene Salicylate Caution Certain compressor oils, chemicals, household cleaners, solvents, Trade Names of some Compressor Oils, paints and fumes will attack plastic bowls and can cause bowl failure. Rubber Compounds and other Materials Do not use near these materials. When bowl becomes dirty replace bowl or wipe only with a clean, dry cloth. Reinstall bowl guard or buy that will Attack Polycarbonate Plastic and install a bowl guard. Immediately replace any crazed, cracked, Bowls. damaged or deteriorated plastic bowl with a bowl or a new plastic Atlas "Perma-Guard" National Compound #N11 bowl and bowl guard. Buna N "Nylock" VC-3 Cellulube #150 and #220 Parco #1306 Neoprene Caution Crylex #5 cement *Permabond 910 *Eastman 910 Petron PD287 Except as otherwise specified by the manufacturer, this product Garlock #98403 (polyurethane) Prestone is specifically designed for compressed air service, and use with Haskel #568-023 Pydraul AC any other fluid (liquid or gas) is a misapplication. For example, Hilgard Co.'s hil phene Sears Regular Motor Oil use with or injection of certain hazardous liquids or gases in the Houghton & Co. oil #1120, Sinclair oil "Lily White" system (such as alcohol or liquid petroleum gas) could be harmful #1130 & #1055 Stauffer Chemical FYRQUEL #150 to the unit or result in a combustible condition or hazardous Houtosafe 1000 Stillman #SR 269-75 (polyurethane) external leakage. Before using with fluids other than air, or for non- Kano Kroil Stillman #SR 513-70 (neoprene) industrial applications, or for life support systems, consult Wilkerson Keystone penetrating oil #2 Tannergas Operations for written approval. *Loctite 271 Telar *Locite 290 Tenneco anderol #495 & #500 oils *Loctite 601 Titon *Loctite Teflon-Sealant *Vibra-tite Marvel Mystery Oil Zerex Minn. Rubber 366Y *When in raw liquid form. We cannot possibly list all harmful substances, so check with Mobay or the General Electric office for further information on polycarbonate plastic. The trade names “EconOmist” and “Flow-Guide” are registered at the United States Patent Office. H “Auto-Fill”, “Dial-Air”, “Flex-Drain”, “Mainliner” and “Whirl-Flo” are tradenames of Wilkerson. Claims and Shortages: Risk of loss passes to buyer when goods are delivered to the carrier. Inspect all shipments for damage at time of receipt. Claims should be filed by the consignee against the carrier. Changes: Wilkerson maintains a policy of ongoing product development and improvement. We therefore reserve the right to change dimensions, specifications and design without notice. Pneumatic Division H4 Richland, Michigan www.wilkersoncorp.com Catalog 9EM-TK-190-3 Offer of Sale Offer of Sale The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”. 1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order for claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out Products, to or from Buyer is subject to these Terms and Conditions or any newer version of of: (a) improper selection, improper application or other misuse of Products purchased by the terms and conditions found on-line at www.parker.com/saleterms/. Seller objects to any Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use contrary or additional terms or conditions of Buyer’s order or any other document issued by of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; Buyer. or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided. 2. Price Adjustments; Payments. Prices stated on Seller’s quote or other documentation offered by Seller are valid for 30 days, and do not include any sales, use, or other taxes 12. Cancellations and Changes. Orders shall not be subject to cancellation or change unless specifically stated, Unless otherwise specified by Seller, all prices are F.C.A. Seller’s by Buyer for any reason, except with Seller’s written consent and upon terms that will facility (INCOTERMS 2010). Payment is subject to credit approval and is due 30 days from indemnify, defend and hold Seller harmless against all direct, incidental and consequential the date of invoice or such other term as required by Seller’s Credit Department, after loss or damage. Seller may change product features, specifications, designs and availability which Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the with notice to Buyer. maximum allowable rate under applicable law. 13. Limitation on Assignment. Buyer may not assign its rights or obligations under this 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and agreement without the prior written consent of Seller. Seller shall not be responsible for any damages resulting from any delay. Regardless of 14. Force Majeure. Seller does not assume the risk and shall not be liable for delay the manner of shipment, title to any products and risk of loss or damage shall pass to or failure to perform any of Seller’s obligations by reason of circumstances beyond the Buyer upon placement of the products with the shipment carrier at Seller’s facility. Unless reasonable control of Seller (hereinafter “Events of Force Majeure”) Events of Force Majeure otherwise stated, Seller may exercise its judgment in choosing the carrier and means of shall include without limitation: accidents, strikes or labor disputes, acts of any government delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated or government agency, acts of nature, delays or failures in delivery from carriers or suppliers, will be made except on terms that will indemnify, defend and hold Seller harmless against all shortages of materials, or any other cause beyond Seller’s reasonable control. loss and additional expense. Buyer shall be responsible for any additional shipping charges 15. Waiver and Severability. Failure to enforce any provision of this agreement will not incurred by Seller due to Buyer’s acts or omissions. waive that provision nor will any such failure prejudice Seller’s right to enforce that provision 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in in the future. Invalidation of any provision of this agreement by legislation or other rule of law material or workmanship for a period of twelve months from the date of delivery to Buyer or shall not invalidate any other provision herein. The remaining provisions of this agreement 2,000 hours of normal use, whichever occurs first. The prices charged for Seller’s products will remain in full force and effect. are based upon the exclusive limited warranty stated above, and upon the following 16. Termination. Seller may terminate this agreement for any reason and at any time by disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE giving Buyer thirty (30) days written notice of termination. Seller may immediately terminate AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. this agreement, in writing, if Buyer: (a) commits a breach of any provision of this agreement SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, (b) appointments a trustee, receiver or custodian for all or any part of Buyer’s property (c) INCLUDING DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR files a petition for relief in bankruptcy on its own behalf, or by a third party (d) makes an PURPOSE. assignment for the benefit of creditors, or (e) the dissolves or liquidates all or a majority of its 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon assets. delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days 17. Governing Law. This agreement and the sale and delivery of all Products hereunder of delivery. No other claims against Seller will be allowed unless asserted in writing within 30 shall be deemed to have taken place in and shall be governed and construed in accordance days after delivery. Buyer shall notify Seller of any alleged breach of warranty within 30 days with the laws of the State of Ohio, as applicable to contracts executed and wholly performed after the date the defect is or should have been discovered by Buyer. Any action based upon therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and breach of this agreement or upon any other claim arising out of this sale (other than an action consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio by Seller for an amount due on any invoice) must be commenced within 12 months from the with respect to any dispute, controversy or claim arising out of or relating to this agreement. date of the breach without regard to the date breach is discovered. 18. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. or similar rights except as provided in this Section. Seller will defend and indemnify Buyer IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE dress and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF and will pay the cost of any settlement or damages awarded in an action brought against USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT, Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY such allegations of infringement, and Seller having sole control over the defense of any CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. allegations or actions including all negotiations for settlement or compromise. If a Product is 7. User Responsibility. The user, through its own analysis and testing, is solely subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, responsible for making the final selection of the system and Product and assuring that all at its sole expense and option, procure for Buyer the right to continue using the Product, performance, endurance, maintenance, safety and warning requirements of the application replace or modify the Product so as to make it noninfringing, or offer to accept return of are met. The user must analyze all aspects of the application and follow applicable industry the Product and return the purchase price less a reasonable allowance for depreciation. standards and Product information. If Seller provides Product or system options, the user is Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based responsible for determining that such data and specifications are suitable and sufficient for on information provided by Buyer, or directed to Products delivered hereunder for which all applications and reasonably foreseeable uses of the Products or systems. the designs are specified in whole or part by Buyer, or infringements resulting from the 8. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, modification, combination or use in a system of any Product sold hereunder. The foregoing confidential information or equipment furnished by Buyer or any other items which become provisions of this Section shall constitute Seller’s sole and exclusive liability and Buyer’s sole Buyer’s property, may be considered obsolete and may be destroyed by Seller after two and exclusive remedy for infringement of Intellectual Property Rights. consecutive years have elapsed without Buyer ordering the items manufactured using such 19. Entire Agreement. This agreement contains the entire agreement between the Buyer property. Seller shall not be responsible for any loss or damage to such property while it is and Seller and constitutes the final, complete and exclusive expression of the terms of sale. in Seller’s possession or control. All prior or contemporaneous written or oral agreements or negotiations with respect to the 9. Special Tooling. A tooling charge may be imposed for any special tooling, including subject matter are herein merged. without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. 20. Compliance with Law, U. K. Bribery Act and U.S. Foreign Corrupt Practices Act. Such special tooling shall be and remain Seller’s property notwithstanding payment of any Buyer agrees to comply with all applicable laws and regulations, including both those of the charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to United Kingdom and the United States of America, and of the country or countries of the Seller which is utilized in the manufacture of the Products, even if such apparatus has been Territory in which the Buyer may operate, including without limitation the U. K. Bribery Act, specially converted or adapted for such manufacture and notwithstanding any charges paid the U.S. Foreign Corrupt Practices Act (“FCPA”) and the U.S. Anti-Kickback Act (the “Anti- by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise Kickback Act”), and agrees to indemnify and hold harmless Seller from the consequences dispose of any special tooling or other property in its sole discretion at any time. of any violation of such provisions by Buyer, its employees or agents. Buyer acknowledges 10. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, that they are familiar with the provisions of the U. K. Bribery Act, the FCPA and the Anti- Seller shall retain a security interest in the goods delivered and this agreement shall be Kickback Act, and certifies that Buyer will adhere to the requirements thereof. In particular, deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller Buyer represents and agrees that Buyer shall not make any payment or give anything of as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary value, directly or indirectly to any governmental official, any foreign political party or official to perfect its security interest. thereof, any candidate for foreign political office, or any commercial entity or person, for the J purpose of influencing such person to purchase products or otherwise benefit the business 11. Improper use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless of Seller. from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other 02/12 Pneumatic Division J1 Richland, Michigan www.wilkersoncorp.com Offer of Sale