PCB Holder with Pivoting Tripod WBH 3000S The PCB holder WBH 3000S holds and fixes the circuit board Product Information in x-y-direction. With the comprehensive accessory all board sizes up to max. 310 x 320 mm can be fixed fast and easy. Circuit board and component are completely plane to improve process security. The hot air pencil HAP 3 of the WHA 3000P or WHA 3000V hot air station can be fixed at the head of the WHA 3000 WBH 3000S. The head has a swivel lever in order to lower or raise the head in z-direction. The head can be swiveled to the 700 W Hot Air Set right or left of the working area. Once the head has been swiveled the unit switches into Stand-By modus (nozzle pre- heating active) with reduced temperature and air flow rate. The versatile system for ambitious repair jobs. Preheating from below improves the universal PCB repair. We recommend to use the preheating plate WHP 3000 together with the PCB holder WBH 3000S for improved repair process. The WHP 3000 is The set consists of: easy to slide under the PCB holder from the front. • WHA 3000P 700 W Hot air station with built-in turbine or WHA 3000V 700 W hot air station for use with compressed air or inert gas Order No. WBH 3000S: 005 33 163 99 • HAP 3 Hot air pencil • AKT 30 Support with Stop+Go function • WBH 3000S PCB-holder with pivoting tripod • WHP 3000 heating plate with digital temperature read out Order No. WHA 3000PS: 005 33 556 99 Order No. WHA 3000VS: 005 33 596 99 Heating Plate WHP 3000 The WHP 3000 enables electronic assemblies to be pre-heated In numerous ways. The heating plates heats up the component from below equal to the correct working temperature needed to ensure reliable joints. This reduces the required heat from the hot air pencil and the risk of thermical damage. The whole repair process is more reliable and faster. The heating plate is equipped with 3 infrared high temperature lamps. They provide a fast and precise heating up. The digital regulation electronics ensure precise temperature behavior and support various special functions such as „AUTO OFF“ or „STAND_BY“ temperature. Read and set temperature are indicated digitally. Two different size heating zones are available. Using an optional external sensor, the temperature can be regulated to defined measuring points. If an external sensor is connected the display shows the read temperature of the sensor. An integrated RS 232 interface enables the WHP 3000 to be controlled externally from the WHA 3000P or WHA 30000V hot air station. In this case the WHP 3000 heating plate is part of the 3-step temperature-time profile. We recommend to use the preheating plate together with the PCB holder WBH 3000S for secure positioning of the circuit board. The WHP 3000 is easy to slide under the PCB holder from the front. Technical Data WHP 3000: Dimensions (W x D x H): 254 x 395 x 70 Power: small heating zone 200 W Heated zone: max. 120 x 190 mm big heating zone 600 W Mains voltage: 230 V Temperature range: 50°C – 400°C Protection class: 1 Order No. WHP 3000: 005 33 386 99 For more information please contact: Cooper Tools GmbH Carl-Benz-Str. 2 74354 Besigheim, Germany Tel.: 07143/580-0 Fax: 07143/580-108 Stop+Go WHA 3000P Digital 700 W Hot Air Station with Built-in Turbine Support AKT 30 for tild safe holding of the The WHA 3000P hot air station is suitable for difficult repairs on circuit boards with fine pitch components hot air pencil. Once the HAP 3 has been with a large number of leads. A well thought-out device concept combines maximum process safety with placed in the support the unit switches ease of use and technically mature detail solutions like the automatic operating mode which facilitates the Connection into Stand-By modus (nozzle pre-heating work and rises productivity and quality of your rework jobs. A comprehensive range of accessories adds to The following connections are on active) with reduced temperature and air the possible uses of this repair station. the back of the housing: flow rate. Technical Data WHA 3000P: • RS 232 interface e.g. to connect Dimensions (W x D x H): 240 x 270 x 170 mm the WHP 3000 heating plate Mains voltage: 230 V • Connection for manual control or Max. heat power: 700 W foot switch (both optional) Temperature range: 50°C – 550°C Accuracy: +- 25°C Air flow rate: 5 – 50 l/min Vacuum: - 0,6 bar Protection class 1 (power unit and hot air pencil hard LCD grounded) Bright clear LCD for easy reading of the parameter settings. Order No. WHA 3000P: 005 33 346 99 Manual operating mode For work with manual parameter setting, e.g. for different rework tasks. Automatic operating mode Program with 3-step temperature time profile. Free programmable parameter settings of hot air temperature, air flow and timer which can be used in connection with the optional heating plate WHP 3000. Efficient operation with highest process repeatability. Up to 10 parameter sets can be programmed. Control Easy to use buttons for precise parameter setting of temperature, air flow and timer. LEDs for indicating start/stop or vacuum WHA 3000V Digital 700 W Hot Air Station for Use with Compressed function. Built-in Turbine Air or Inert Gas The powerful and maintenance- The WHA 3000V requires an external supply of compressed air or inert free turbine provides an air flow gas. Function and features are identical to the WHA 3000P. of max. 50 l/min. The turbine is The air flow is controlled digitally by an proportional valve. silent-running and continuously adjustable. Technical Data WHA 3000V: Dimensions (W x D x H): 240 x 270 x 170 mm Mains voltage: 230 V Max. heat power: 700 W Temperature range: 50°C – 550°C Accuracy: +- 25°C Air flow rate: 5 – 50 l/min ESD safe Vacuum: - 0,6 bar Housing and iron are ESD safe. Compressed air / inert gas: 4 – 6 bar Charge carrier free air flow. Protection class 1 (power unit and hot air pencil hard grounded) Order No. WHA 3000V: 005 33 366 99