Manufacturers
VISHAY SPECTROL 533-21103
Description
Vishay 533-21103 Potentiometer. Multi Turn | Wirewound | 3 Turns | 1.0W | ± 0.25 % Linearity
Part Number
533-21103
Price
Request Quote
Manufacturer
VISHAY SPECTROL
Lead Time
Request Quote
Category
PRODUCTS - 5
Features
- Bushing and servo mount designs available
- Dual gang configuration and concentric shafts
- High torque, center tap, slipping clutch on request
- Metric shaft available
- Rear shaft extensions and support bearing
- Special markings and front shaft extensions
- Special resistance tolerances to 1 %
Datasheet
Extracted Text
Model 533, 534, 535 www.vishay.com Vishay Spectrol 7 / " (22.2 mm) Multi Turn Wirewound Potentiometer - 8 533: 3 Turns / 534: 10 Turns / 535: 5 Turns FEATURES • Bushing and servo mount designs available • Special resistance tolerances to 1 % • Rear shaft extensions and support bearing • Metric shaft available • Dual gang configuration and concentric shafts QUICK REFERENCE DATA • High torque, center tap, slipping clutch on request Sensor type ROTATIONAL, multi turn wirewound • Special markings and front shaft extensions Output type Output by turrets • Material categorization: for definitions of compliance Market appliance Industrial please see www.vishay.com/doc?99912 7 Dimensions / " (22.2 mm) 8 ELECTRICAL SPECIFICATIONS PARAMETER MODEL 533 MODEL 534 MODEL 535 Resistance range - standard values 50 to 20 k 100 to 100 k 50 to 50 k Capability range 5 to 60 k 10 to 200 k 5 to 100 k Standard tolerance ± 5 % ± 5 % ± 5 % Linearity (independent) ± 0.25 % ± 0.25 % ± 0.25 % Noise 100 ENR 100 ENR 100 ENR 1080° + 10° 3600° + 10° 1800° + 10° Rotation (electrical and mechanical) - 0° - 0° - 0° Power rating (at 70 °C) 1.0 W 2.0 w 1.5 W Insulation resistance 1000 M minimum 500 V DC Dielectric strength 1000 V minimum 60 Hz RMS Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater Temperature coefficient 20 ppm/°C (standard values, wire only) End voltage 0.25 % of total applied voltage, maximum Phasing CCW end points - section 2 phased to section 1 within ± 2° Taps Center tap only MARKING RESISTANCE VALUES Manufacturer’s name and model number, 533 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K resistance value and tolerance, linearity specification date code and terminal Unit identification 534 ( 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K identification. Example of a marking for a standard part: 535 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K 534-11103 ORDERING INFORMATION 5 3 4 B 21 03 20 3J C 4 70 OHMIC VALUE OHMIC VALUE TOLERANCE ON MODEL STYLE GANGS LINEARITY SPECIAL REQUEST o o GANGS N 1 GANGS N 2 OHMIC VALUE 533 B: Bushing 1 470 = 47 470 = 47 J = ± 5 % C = ± 0.25 % Special code S: Servo 2 222 = 2.200 222 = 2.200 F = ± 1 % xxxx 534 D = ± 0.1 % 103 = 10 k 103 = 10 k 535 L = ± 0.2 % For ohmic value For ohmic value E = ± 0.05 % range see range see electrical electrical specification specification PART NUMBER DESCRIPTION (for information only) 534- 1 2 103 203 xxxx OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL o o GANGS N 1 GANGS N 2 B: 1 S: 2 Revision: 30-Jul-14 Document Number: 57065 1 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Model 533, 534, 535 www.vishay.com Vishay Spectrol SINGLE SECTION DIMENSIONS in inches (millimeters) ± 0.015 ± 0.031 0.750 (19.05) 0.812 (20.62) ± 0.015 0.312 (7.92) 0.030 MAX. (0.76) 0.062 (1.57) 0.200 MIN. (5.08) METRIC SHAFT: 534B...8872 2 1 3 BUSHING + 0.0000 - 0.0003 MOUNT MODEL: Ø 0.2497 (6.34) + 0.0000 - 0.0020 ± 0.015 534B/534-1 Ø 0.4062 Ø 0.875 (10.32) (22.22) + 0.000 ± 0.010 Ø 6.00 mm - 0.0003 0.032 x 0.032 (0.81) x (0.81) DP 3 / - 32UNEF - 2A 8 9 mm x 0.75 P SCREWDRIVER SLOT ± 0.031 ± 0.015 0.850 (21.59) 0.375 (9.52) 0.062 (1.57) 0.057 (1.45) MIN. 30° R 0.625 MAX. (15.88) 0.300 (7.62) MIN. 0.062 (1.57) TYP. 1 2 3 + 0.0000 - 0.0005 SERVO Ø 0.7500 (19.05) MOUNT MODEL: + 0.0000 Ø 0.1248 (3.17) - 0.0003 534S/534-2 ± 0.015 Ø 0.875 (22.22) 2 CW 1 3 Ø 0.750 (19.05) MAX. Ø 0.875 (22.22) SCHEMATIC Mounting hardware, washer and panel nut, nickel plated MECHANICAL SPECIFICATIONS PARAMETER Bearing type Bushing: Sleeve bearing Servo: Ball bearing Torque (maximums): starting 534 533/535 Section 1 0.5 oz. - in (36 g - cm) 0.7 oz. - in (50 g - cm) Section 2 0.9 oz. - in (65 g - cm) 1.1 oz. - in (79 g - cm) Torque (maximums): running 534 533/535 Section 1 0.4 oz. - in (28.80 g - cm) 0.6 oz. - in (43.20 g - cm) Section 2 0.7 oz. - in (50.40 g - cm) 0.9 oz. - in (64.8 g - cm) Weight (maximums) Section1 0.75 oz. (21.26 g) Section 2 1.25 oz. (35.44 g) Stop strength 75 oz. - in (static) (5.4 kg - cm) Ganging 2 sections maximum POWER RATING CHART ENVIRONMENTAL SPECIFICATIONS 4 Vibration 15 g thru 2000 Hz Shock 50 g 534 Rotational life (shaft revolution) 3 533 300 000 535 534 1 000 000 534 (servo) > 1 000 000 535 500 000 2 533 Load life 900 h Temperature range - 55 °C to + 125 °C 1 0 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE IN °C Revision: 30-Jul-14 Document Number: 57065 2 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATED POWER IN W Model 533, 534, 535 www.vishay.com Vishay Spectrol RESISTANCE ELEMENT DATA MAXIMUM CURRENT MAXIMUM VOLTAGE RESISTANCE VALUE RESOLUTION OHMS PER TURN AT 70 °C AMBIENT ACROSS COIL () (%) (mA) (V) 533 534 535 533 534 535 533 534 535 533 534 535 533 534 535 50 - 50 0.149 - 0.120 0.0746 - 0.0603 141.0 - 173.0 7.07 - 8.66 100 100 100 0.111 0.060 0.075 0.1114 0.0603 0.0746 100.0 141.0 122.0 10.0 14.1 12.2 200 200 200 0.097 0.037 0.061 0.1954 0.0746 0.1220 70.7 100.0 86.6 14.1 20.0 17.3 500 500 500 0.069 0.031 0.049 0.3424 0.1520 0.2459 44.7 63.2 54.7 22.4 31.6 27.4 1K 1K 1K 0.063 0.025 0.041 0.6331 0.2459 0.4113 31.6 44.7 38.7 31.6 44.7 38.7 2K 2K 2K 0.041 0.021 0.031 0.8206 0.4113 0.6331 22.4 31.6 27.4 44.7 63.2 54.8 5K 5K 5K 0.044 0.016 0.034 2.2330 0.8206 1.7230 14.1 20.0 17.3 70.7 100.0 86.6 10K 10K 10K 0.034 0.017 0.030 3.4510 1.7230 3.0160 10.0 14.1 12.2 100.0 141.0 122.0 20K 20K 20K 0.031 0.015 0.020 6.1790 3.0160 3.9910 7.07 10.0 8.66 141.0 200.0 173.0 - 50K 50K - 0.009 0.015 - 4.6690 7.4560 - 6.32 5.47 - 316.0 274.0 - 100K - - 0.007 - - 7.4560 - - 4.47 - - 447.0 - - - - --- --- --- --- - - - --- --- --- --- Revision: 30-Jul-14 Document Number: 57065 3 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 533-21103 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods