25AE/30AE/35AE 25AE/30AE/35AE TECHNICAL TECHNICAL Paging Horn and Ceiling Speakers Practice Practice February 25, 2011 TELECOM SOLUTIONS FOR THE 21ST CENTURY TELECOM SOLUTIONS FOR THE 21ST CENTURY Cost Effective Speakers for Indoor and Outdoor Use The 25AE, 30AE and 35AE paging speakers provide additional eco- nomical paging coverage to existing Viking paging units (PA-2A, PA- 30, CPA-7B, HF-3W, M2W) or to any system with an 8 ohm output. In outdoor, factory or warehouse environments, 25AE paging horns are the best method of producing understandable sound. In these environments the directional design allows the installer to focus the sound cone down aisles and toward work areas. Model 25AE In office and restaurant environ- ments, it is best to distribute sound more evenly. Ceiling mounted 30AE or 35AE speak- ers in close proximity offer the best distribution and are cost effective. The 35AE speakers also include a volume control. Model 30AE Model 35AE Features Features Applications Applications 25AE Paging Horn • Add additional speakers and coverage area to existing paging systems such as Viking’s • Adjustable base for easy mounting and PA-2A, PA-30, CPA-7B, HF-3W, M2W directional adjustment • Add speakers to the DVA-2WA • Compact design for out of the way mounting • Designed to work with all of Viking’s 8 ohm paging products Phone...715.386.8861 Phone...715.386.8861 30AE/35AE Ceiling Speakers Specifications Specifications • Attractive white grill for flush mounting in office ceilings Model 25AE • Mounting hardware included: (4) 2.5” bolts, Nominal Power: 12 watts Impedance: 8 ohms (4) nuts and (4) 1” diameter washers Dimensions: 127mm (5”) diameter • Large permanent magnet Shipping Weight: .68 kg (1.5 lbs) Environmental: 5% to 95% non-condensing humidity • Excellent frequency response Frequency Response: 400 Hz to 7000 Hz • Designed to work with all of Viking’s 8 ohm paging products Model 30AE/35AE • The 35AE includes a volume control Nominal Power: 6 watts Impedance: 8 ohms Dimensions: 324mm x 95mm (12.75” x 3.75”) iin nffo o@ @v viik kiin ng ge elle ec cttr ro on niic cs s..c co om m Shipping Weight: 1.36 kg (3 lbs) Environmental: 5% to 95% non-condensing humidity http://www.vikingelectronics.com http://www.vikingelectronics.com Frequency Response: 85 Hz to 15000 Hz 8 Ohm Speakers Installation Installation The 25AE paging horn is designed to be surface mounted to any rigid surface. Mounting hardware for the 30AE and 35AE ceiling speakers is included for easy installation in drop ceilings or speaker enclosures. Note: The 25AE paging horn is approximately 5db louder than the ceiling speakers. Important: The 35AE ceiling speaker must be parallel wired. Series / Parallel: Speaker A will have Parallel: Similar speakers will Series / Parallel: If connected as shown, see approximately twice the volume of speaker B. have the same volume. table below for speaker recommendations. B A To To To Paging Paging Paging Amp Amp Amp Long Cable Runs - Very long runs may require step-up transformers. Speakers Per Output (4) 0.281" diameter holes Paging Amp Outputs Parallel Series/Parallel 3.75" Paging CPA-7B 1 8 16 8 Ohm 8 Ohm 70V Output HF-3W 1 1 2 M2W 1 3 6 8.5" PA-2A 1 3 6 Parts Express part # 300-040 or equivalent 11.25" PA-30 2 15 30 (contact Parts Express at: 800-338-0531) Recommendations Recommendations Ambient Noise Environment Level Typical Examples Ceiling Height Distance Between Speakers Quiet - Conversations very 9 ft 35 ft 50dB Hotel lobby, hospital area, quiet office easily understood. 14 ft 50 ft 9 ft 25 ft Normal - Conversations 60dB Bank lobby, department store, auditorium easily understood. 14 ft 35 ft Noisy - Voice must be 9 ft 15 ft 70dB* Assembly line, supermarket, restaurant raised to be understood. 14 ft 25 ft Paging 25 ft to Very Noisy - Conversation 80dB* Punch press, printing plant, garage, yard difficult or impossible. Horns 75 ft * Note: An FBI-1A Feedback Eliminator is recommended. For more information, retrieve Fax Back Document 465. IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666 Our Technical Support Department is available for assistance Monday 8am-4pm and Tuesday-Friday 8am - 5pm central time. So that we can give you better service, before you call please: 1. Know the model number, the serial number and what software version you have (see serial label). 2. Have your Technical Practice in front of you. 3. It is best if you are on site. RETURNING PRODUCT FOR REPAIR RETURNING PRODUCT FOR EXCHANGE The following procedure is for equipment that needs repair: The following procedure is for equipment that has failed out-of-box (within 10 days of purchase): 1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) 1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The number. The customer MUST have a complete description of the problem, with all pertinent information regarding the customer MUST be able to step through recommended tests for diagnosis. defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc. 2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input 2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14) sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individual- calendar days from the date of issue. ly boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include 3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to: distributor will then replace the product over the counter at no charge. The distributor will then return the product to Viking Electronics, 1531 Industrial Street, Hudson, WI 54016 Viking using the same R.A. number. 3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box. 4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't 4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned. followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge. WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manu- factured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number. This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others. Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSE- QUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limi- tation of incidental or consequential damages, so this limitation may not apply to you. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. Product Support Line...715.386.8666 Fax Back Line...715.386.4345 Product Support Line...715.386.8666 Fax Back Line...715.386.4345 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no respon- sibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes. Fax Back Doc 498 Printed in the U.S.A. ZF300310 Rev C