FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE These Model V34 ECLH horizontal sidewall sprinklers are designed with a large orifice to minimize operating pressures while providing extended coverage light hazard protec tion. The design incorporates state‑of‑the‑art, heat responsive, frangi ble glass bulb design (stan dard or quick response) for prompt, precise operation. The die cast frame is more streamlined and attractive than traditional sand cast frames. It is cast with a hex‑shaped wrench boss to allow easy tightening from many angles, reducing assembly STANDARD HORIzONTAL RECESSED HORIzONTAL effort. This sprinkler is available in various temperature ratings (see chart on page 2) and fin ishes SIDEWALL SIDEWALL to meet many design requirements. (V3415 AND V3416) (V3415 AND V3416) SPRINKLER OPERATION: The operating mechanism is a frangible glass bulb which contains a heat responsive liquid. During a fire, the ambient tempera ture rises causing the liquid in the bulb to expand. When the ambient temperature reaches the rated temperature of the sprinkler, the bulb shatters. As a result, the waterway is cleared of all sealing parts and water is discharged towards the deflector. The deflector is designed to distribute the water in a pattern that is most effective in controlling the fire. COVERAGE: Extended spray coverage is up to 384 square feet/35.7 sq. m per NFPA 13. TECHNICAL SPECIFICATIONS: Models: V3415, V3416 ACCESSORIES Style: ECLH – Horizontal Side wall or Recessed Installation Wrench: Horizontal Sidewall • Open End: V34 17 Nominal Orifice Size: 32 ⁄ "/14 mm • Recessed: V34 K-Factor: 8.0 Imp./11.5 S.I.^ Sprinkler Finishes: Nominal Thread Size: 3/4" NPT/20 mm • Plain brass Max. Working Pressure: 175 psi/1200 kPa • Chrome plated Factory Hydrostatic Test: 100% @ 500 psi/ • White painted** 3450 kPa • Custom painted** Min. Operating Pressure: 7 psi/48 kPa • Proprietary Nickel Teflon* Coated** Temperature Rating: See chart on page 2. For escutcheons, boxes and other accessories refer to separate sheet. MATERIAL SPECIFICATIONS Deflector: UNS C51000 NOTE: Weather resistant recessed escutcheon Bulb: Glass with glycerin solu tion available upon request. Bulb Nominal Diameter:  ^ For K‑Factor when pressure is mea sured in • Standard: 5.0 mm Bar, multiply S.I. units by 10.0. • Quick Response: 3.0 mm * Teflon is a registered trademark of Dupont Co. Load Screw: UNS C65100 ** UL Listed for corrosion resistance in all Pip Cap: UNS C65100 configurations. Spring Beryllium nickel Seal: Teflon* tape Frame: Die cast brass 65‑30 Lodgement Spring: UNS S30200 (Exaggerated for clarity) JOB/OWNER CONTRACTOR ENGINEER System No. ______________________________ Submitted By ____________________________ Spec Sect _______________ Para ___________ Location ________________________________ Date ___________________________________ Approved _______________________________ Date ___________________________________ www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_G 40.33_1 FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE APPROVALS/LISTINGS Nominal Deflector Approved Temperature Ratings ‡ Model Orifice Size K-Factor Response Type (Refer to notes below.) Room Size Feet/meters Imperial 16 × 16 16 × 18 16 × 20 16 × 22 16 × 24 Inches/mm S.I.^ 4.9 × 4.9 4.9 × 5.5 4.9 × 6.1 4.9 × 6.7 4.9 × 7.3 17 1 – C 32 ⁄ 8.0 1 – C 1 – C 1 – A 1 – A V3415 Standard ECLH HSW 14 11.5 2 – A 2 – A 2 – A 2 – A 2 – A 17 32 ⁄ 8.0 Recessed ECLH HSW V3415 Standard 1 – C 1 – C 1 – C 1 – A 1 – A 14 11.5 Up to 1/2” Adjustment 17 32 ⁄ 8.0 Recessed ECLH HSW V3415 Standard 1 – C 1 – C 1 – C 1 – A 1 – A 14 11.5 Up to 3/4” Adjustment 17 1 – C 32 ⁄ 8.0 1 – C 1 – C 1 – A.B 1 – A V3416 Quick ECLH HSW 14 11.5 2 – D 2 – D 2 – D 2 – D 2 – D 17 1 – C 32 ⁄ 8.0 Recessed ECLH HSW 1 – C 1 – C 1 – A.B 1 – A V3416 Quick 14 11.5 Up to 1/2” Adjustment 2 – A. E* 2 – A. E* 2 – A. E* 2 – A. E* 2 – A. E* 17 32 ⁄ 8.0 Recessed ECLH HSW V3416 Quick 1 – C 1 – C 1 – C 1 – A.B 1 – A 14 11.5 Up to 3/4” Adjustment ‡ Listings and approval as of printing. ^For K-Factor when pressure is measured in Bar, multiply S.I. units by 10.0. *Approved by FM as standard response. APPROVED TEMPERATURE RATINGS Approval Temperature Rating, Deflector to Ceiling 1 – UL/ULC A – 135°F/57°C, 4 – 12"/102 – 305mm 2 – FM B – 135°F/57°C to 175°F/79°C, 4 – 6"/102 – 152mm 3 – NYC/MEA † C – 135°F/57°C to 200°F/93°C, 4 – 12"/102 – 305mm 4 – CSFM § D – 135°F/57°C to 155°F/68°C, 4 – 12"/102 – 305mm E – 155°F/68°C, 4 – 12"/102 – 305mm † MEA Pending § CSFM Pending VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 40.33_2 REV_G FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE RATINGS All glass bulbs are rated for temperatures from ‑67°F/‑55°C to those shown in table below. Temperature – ºF/ºC Victaulic Sprinkler Temperature Part Nominal Temperature Maximum Ambient Classification Identification Rating Temperature Allowed Glass Bulb Color 135 100 Ordinary A Orange 57 38 155 100 Ordinary C Red 68 38 175 150 Intermediate E Yellow 79 65 200 150 Intermediate F Green 93 65 ORDERING INFORMATION Please specify the following when ordering: Sprinkler Model Number Style Temperature Rating K-Factor Thread Size Quantity Sprinkler Finish Escutcheon Finish Wrench Model Number www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_G 40.33_3 FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE WARNING WARNING • Always read and understand installation, care, and maintenance instructions, supplied with each box of sprinklers, before proceeding with installation of any sprinklers. • Always wear safety glasses and foot protection. • Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products. • Installation rules, especially those governing obstruction, must be strictly followed. • Painting, plating, or any re-coating of sprinklers (other than that supplied by Victaulic) is not allowed. Failure to follow these instructions could result in serious personal injury and/or property damage. The owner is responsible for maintaining the fire protection system and devices in proper operating condition. For minimum maintenance and inspection requirements, refer to the current National Fire Protection Association pamphlet that describes care and maintenance of sprinkler systems. In addition, the authority having jurisdiction may have additional maintenance, testing, and inspection requirements that must be followed. If you need additional copies of this publication, or if you have any questions about the safe installation of this product, contact Victaulic World Headquarters: P.O. Box 31, Easton, Pennsylvania 18044-0031 USA, Telephone: 001-610-559-3300. VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 40.33_4 REV_G FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE DIMENSIONS Standard HSW – V3415, V3416 3⁄"/78 mm 2⁄"/59 mm ⁄"/ ⁄"/ 1⁄"/ 1⁄"/ 14 mm 10 mm 40 mm 33 mm ½" Adjustment Recessed – V3415, V3416 (drawing not to scale) ⁄"/ 18 mm 1⁄"/ 1⁄"/ 2⁄"/60 mm ⁄"/16 mm 49 mm 29 mm Finished Ceiling Finished Ceiling 4 – 12"/102 – 305 mm* 4 – 12"/102 – 305 mm* Per NFPA Per NFPA 2"/51 mm 2⁄"/60 mm 2"/51 mm 2⁄"/60 mm 2⁄"/ Min. Hole Max. Hole Min. Hole Max. Hole 75 mm Finished Surface Finished Surface Typical Wall Typical Wall MAXIMUM EXTENSION MAXIMUM RECESS ¾" Adjustment Recessed – V3415, V3416 (drawing not to scale) ⁄"/ 24 mm 1⁄"/ 2⁄"/ 1⁄"/ ⁄"/16 mm 60 mm 41 mm 35 mm Finished Ceiling Finished Ceiling 4 – 12"/102 – 305 mm* 4 – 12"/102 – 305 mm* Per NFPA Per NFPA 2"/51 mm 2⁄"/60 mm 2⁄"/60 mm 2"/51 mm Max. Hole 2⁄"/ Min. Hole Max. Hole Min. Hole 75 mm Finished Surface Finished Surface Typical Wall Typical Wall MAXIMUM EXTENSION MAXIMUM RECESS *See “Approvals/Listings” chart on page 2 for allowable deflector to ceiling heights. www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_G 40.33_5 FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE AVAILABLE WRENCHES Sprinkler Type V34 – Recessed V34 – Open End No escutcheon yes yes With escutcheon yes — ROOM SIzE SPRINKLER PERFORMANCE FLOW AND PRESSURE (MINIMUM) – V3415, V3416 Flow Rate – GPM/LPM End Sprinkler Pressure – PSI/kPa UL UL Room Size Feet/m FM 4 – 6" 6 – 12" FM 4 – 6" 6 – 12" 16 × 16 32 26 28 16 10.6 12.3 4.9 × 4.9 121 98 106 110 73 85 16 × 18 36 29 33 20 13.2 17.1 4.9 × 5.5 136 110 125 140 91 118 16 × 20 40 32 35 25 16 19.2 4.9 × 6.1 151 121 132 170 110 132 16 × 22 44 36 36 30 20.3 20.3 4.9 × 6.7 167 136 136 205 140 140 16 × 24 48 39 41 36 23.8 26.3 4.9 × 7.3 182 148 155 250 164 181 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 40.33_6 REV_G FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE DISTRIBUTION PATTERNS Models V3415, V3416 K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall And Recessed Horizontal Sidewall Distribution Patterns – Trajectory 10' 3,0m 8' 2,4m 6' 1,8m 4' 1,2m 2' 0,6m 0 2' 4' 6' 8' 10' 12' 14' 16' 18' 20' 22' 24' 26' 28' 30' 0,6m 1,2m 1,8m 2,4m 3,0m 3,7m 4,3m 4,9m 5,5m 6,1m 6,7m 7,3m 7,9m 8,5m 9,1m 32 GPM 29 GPM 26 GPM 121 LPM 110 LPM 98 LPM 36 GPM 39 GPM 136 LPM 148 LPM Minimum Installation Spacing Response Feet/meters V3415 –Standard 8ft (2.4m) V3416 – Quick 8ft (2.4m) NOTES: 1 Data shown is approximate and can vary due to differences in installation. 2 These graphs illustrate approximate trajectories, floor‑wetting, and wall‑wetting patterns for these specific Victaulic FireLock automatic sprinklers. They are provided as information for guidance in avoiding obstructions to sprinklers and should not be used as minimum sprinkler spacing rules for installation. Refer to the appropriate NFPA National Fire Code or the authority having jurisdiction for specific information regarding obstructions, spacing limitations and area of coverage requirements. Failure to follow these guidelines could adversely affect the performance of the sprinkler and will void all Listings, Approvals and Warranties. 3 All patterns are symmetrical to the centerline of the waterway. www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_G 40.33_7 FIRE PROTECTION PRODUCTS – AUTOMATIC SPRINKLERS 40.33 V34, K8.0 Extended Coverage/Light Hazard (ECLH) Horizontal Sidewall and Recessed Horizontal Sidewall Standard and Quick Response V3415 STANDARD RESPONSE, V3416 QUICK RESPONSE WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details. NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligations. For complete contact information, visit www.victaulic.com 40.33 2820 REV G UPDATED 1/2012 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2012 VICTAULIC COMPANY. ALL RIGHTS RESERVED. 40.33