EITX-3001-2N13A1 - VIA

Description

VIA EITX-3001-2N13A1 CPU Board with EITX-3001 with full cable kit

Part Number

EITX-3001-2N13A1

Price

Request Quote

Manufacturer

VIA

Lead Time

Request Quote

Category

PRODUCTS - E

Specifications

AT/ATX Selector

Onboard AT/ATX switch by a 3-pin headers

BIOS

AMI BIOS, 8MBit SPI Flash BIOS

Chipset

VIA VX855 Media System Processor chipset

Compact Flash

1 x Onboard socket. Supports type I/II CompactFlash disk

Construction

Aluminum modeling

Controller

EETI ETP-CP-S5XU resistive touch panel controller
Integrated VIA Chrome 9 HCM DX9 3D/2D graphics & video processor, built-in Unified Video Decoding Accelerator, supports MPEG-2, WMV9/VC1, and H.264 video decoding acceleration.
VIA VT1708B High Definition Audio Codec Onboard TI TPA1517 6-W stereo Audio power amplifier
VIA VT6122 Gigabit Ethernet controller

CRT Interface

Onboard 1 x VGA connector as JVGA1 Supports CRT resolution up to 1920 x 1440

Digital I/O

1 x 2 x6-pin header. Supports 8-bit GPIO, with 5VDC and 12VDC power source

Dimensions

(WxHxD) 230.45 mm x 34 mm x 124.8 mm

Display Memory

Optimized Unified Memory Architecture (UMA), Supports up to 512 MB frame buffer using system memory

Dual Independent Display

Supports CRT + LVDS , CRT + HDMI and LVDS + HDMI at same resolutions, same pixel depths, and same refresh rates

Front I/O Coastline

1 x HDD & PWR LED, 2 x RS-232 / 422 / 485 as COM 1 and COM2, 1 x USB device port by a mini-DIN connector, 1 x 2-pole of Phoenix power input connector, 1 x ATX power on/off switch

Front Side Bus Speed

800 MHz

Fuse Rating

7 A / 125 V

HDD Activity LED

1 x Red color LED

HDMI Interface

AD 9389B HDMI transmitter Onboard 1 x dual-link HDMI connector with flange as JHDMI

Input Voltage

Built-in onboard DC-to-DC converter, Accepts wide range of Power Input of DC 7V ~ 36V, Supports AT and ATX mode, defatult support ATX mode

Interface

1 x 5-wire/4-wire resistive touch sensor interface by a 1 x 5pin header as TOUCH _R1
Supports 1 x RJ-45 connector, Supports Wake On LAN (WOL), Supports Preboot Execution Environment (PXE)
Supports Line-in, Speaker-out, Mic-in connectors by 3*3.5Ø audio jacks

Interval

Programmable 1~255 sec

Keyboard & Mouse

1 x 2x5-pin header. Supports PS2 keyboard/mouse interface

L2 Cache

1 MB

LVDS Interface

Supports 1 x 24-bit single-channel LVDS interface with inverter control signals by an onboard 2x15-pin wafer box connector as LVDS1 Panel resolution support up to WXGA (1366 x 768) Onboard 5V/3.3V LCD power switch (default at 3.3V)

Max. Capacity

Up to 2GB memory size

Onboard I/O Pin-headers

2 of 2 x 5-pin headers for 2 x RS-232 as COM 3 and COM 4, 2 of 1 x 3-pin headers for 5V/12V selection of COM3 and COM4, 1 of SATA data connector 1 of 1 x 6-pin header for connection with VIA EMIO-1530 wireless LAN card,

Output

System reset

Power Input Connector

1 x 2-pole Phoenix connector

Power Status LED

1 x Green color LED

Processor

1.3GHz VIA Nano E
VIA Nano E

Rear I/O Coastline

1 x VGA connector, 1 x Dual-Link HDMI connector with flange as JHDMI, 4 x USB 2.0 host port by 2 pairs of double mini-DIN connector as USB1~USB4, 1 x RJ45 connector for Gigabit Ethernet connection as J1, 3 x 3.5Ø audio jacks as Mic-in Line-in, and Speaker-out

Serial ATA

JMicron JMH330 SATA controller, 1 x SATA II port, maximum data transfer rate up to 300MB/s, Onboard power connector output 5V support 2.5” SATA hard disk drive

Serial Ports

Fintek F81865 LPC I/O controller supports 4 x COM ports in: 2 x RS-232/422/485 by two DB-9 connectors as COM 1 and COM 2, configurable via BIOS setup. Supports RS-485 AutoFlow control functions of COM1 and COM2. 2 x RS-232 by two 2x5-pin headers as COM 3 and COM 4

System Power Management

Timers Power On, ACPI supported

Technology

1 x DDR2 800/667/533 MHz 200-pin SDRAM SODIMM socket

Temperature Sensor

Built-in one Thermal Sensor by onboard 1x3-pin headers

USB Device Port

Supports 1 x USB device port by a mini-DIN connector

USB Host port

Supports 6 x USB 2.0 host ports in: 4 x USB 2.0 host ports by 2 pairs of double mini-DIN connector as USB1~USB4, Reserved 1 x USB 2.0 port by a 1 x 6-pin header with support of individual VCC power for connection with VIA EMIO-1530 Wireless LAN as JWLAN1

Features

Display interface: Supports one VGA, one 24-bit single channel LVDS, and one HDMI port
Dual-sided multiple I/O connector coastlines
Em-ITX form factor: 17cm (W)x 12 cm (L); low profile design
Fanless and ultra low power consumption
Five USB 2.0 host ports and one USB device port
Integrated VIA Chrome9 HCM, DX9 3D/2D graphics & video processor with MPEG-2, WMV9, VC1, and H.264 video decoding acceleration
One Gigabit Ethernet
Supports 5-wire/4-wire resistive touch interface connector
Two RS-232 and two RS-232/422/485
VIA Nano E processor (1MB L2 Cache)

Datasheet

VIA=EITX-3001=ds1-125641966.pdf

823 KiB

Download

Extracted Text

Board Placement 4 x USB 2.0 host ports Em-ITX Series Mic-in CRT/VGA Line-in Line-out HDMI 1 x GbE RJ-45 VIA 24-bit LVDS TI TPA1517 6-W stereo Audio power amplifier AD 9389B HDMI transmitter EITX-3001 1 x SATA (3Gbps) VIA VT6122 GbE chipset Em-ITX Nano™ E Board with 8-bit Digital I/O VGA, HDMI, LVDS, GigaLAN, DDR2 533/667/800 SDRAM SODIMM JMicron JMH330 SATA COM, USB & Resistive Touch controller Power input, 2-pole Phoenix and DC-in Power connector, accepts DC 7V~36V 2 x RS-232 Power on/off switch Power LED & HDD LED 1 x USB 2.0 device port 2 x RS-232/422/485 Specifications Features Part Number EITX-3001-1N13A1 VIA Nano™ E processor (1MB L2 Cache) Processor Processor 1.3GHz VIA Nano™ E System Front Side Bus Speed 800 MHz Em-ITX form factor: 17cm (W) L2 Cache 1 MB x 12 cm (L); low profile design Chipset VIA VX855 Media System Processor chipset BIOS AMI BIOS, 8MBit SPI Flash BIOS Dual-sided multiple I/O System Power Timers Power On connector coastlines Management ACPI supported Memory Technology 1 x DDR2 800/667/533 MHz 200-pin SDRAM SODIMM socket Integrated VIA Chrome9™ Max. Capacity Up to 2GB memory size HCM, DX9 3D/2D graphics & Graphic Controller Integrated VIA Chrome 9™ HCM DX9 3D/2D graphics & video processor, video processor with MPEG-2, built-in Unified Video Decoding Accelerator, supports MPEG-2, WMV9/ VC1, and H.264 video decoding acceleration WMV9, VC1, and H.264 video decoding acceleration Display Memory Optimized Unified Memory Architecture (UMA), Supports up to 512 MB frame buffer using system memory Display interface: Supports CRT Interface Onboard 1 x VGA connector as JVGA1 Supports CRT resolution up to 1920 x 1440 one VGA, one 24-bit single LVDS Interface Supports 1 x 24-bit single-channel LVDS interface with inverter control channel LVDS, and one HDMI signals by an onboard 2x15-pin wafer box connector as LVDS1 port Panel resolution support up to WXGA (1366 x 768) Onboard 5V/3.3V LCD power switch (default at 3.3V) One Gigabit Ethernet HDMI Interface AD 9389B HDMI transmitter Onboard 1 x dual-link HDMI connector with flange as JHDMI Two RS-232 and two RS- Dual Independent Supports CRT + LVDS , CRT + HDMI and LVDS + HDMI at same 232/422/485 Display resolutions, same pixel depths, and same refresh rates Ethernet Controller VIA VT6122 Gigabit Ethernet controller Five USB 2.0 host ports and Interface Supports 1 x RJ-45 connector one USB device port Supports Wake On LAN (WOL) Supports Preboot Execution Environment (PXE) Supports 5-wire/4-wire HD Audio Controller VIA VT1708B High Definition Audio Codec resistive touch interface Onboard TI TPA1517 6-W stereo Audio power amplifier connector Interface Supports Line-in, Speaker-out, Mic-in connectors by 3*3.5Ø audio jacks Serial USB Host port Supports 6 x USB 2.0 host ports in: Fanless and ultra low power • 4 x USB 2.0 host ports by 2 pairs of double mini-DIN connector as consumption USB1~USB4 • Reserved 1 x USB 2.0 port by a 1 x 6-pin header with support of individual VCC power for connection with VIA EMIO-1530 Wireless LAN as JWLAN1 USB Device Port Supports 1 x USB device port by a mini-DIN connector Serial Ports Fintek F81865 LPC I/O controller Supports 4 x COM ports in: • 2 x RS-232/422/485 by two DB-9 connectors as COM 1 and COM 2, configurable via BIOS setup. Supports RS-485 AutoFlow control functions of COM1 and COM2 • 2 x RS-232 by two 2x5-pin headers as COM 3 and COM 4 Front I/O Coastline Rear I/O Coastline Power input COM 2 COM 1 Power / HDD Line-in RJ-45 HDMI connector, LED indicators accepts DC 7V~36V USB 3/4 USB 1/2 USB device 2.0 host 2.0 host Power on/off port ports ports button Line-out Mic-in CRT/VGA Specifications Part Number EITX-3001-1N13A1 Resistive Touch Controller EETI ETP-CP-S5XU resistive touch panel controller Interface 1 x 5-wire/4-wire resistive touch sensor interface by a 1 x 5pin header as TOUCH _R1 DIO Digital I/O 1 x 2 x6-pin header. Supports 8-bit GPIO, with 5VDC and 12VDC power source PS2 Keyboard & Mouse 1 x 2x5-pin header. Supports PS2 keyboard/mouse interface Storage interface Serial ATA JMicron JMH330 SATA controller 1 x SATA II port, maximum data transfer rate up to 300MB/s Onboard power connector output 5V support 2.5” SATA hard disk drive Compact Flash 1 x Onboard socket. Supports type I/II CompactFlash disk H/W Monitoring Temperature Sensor Built-in one Thermal Sensor by onboard 1x3-pin headers System Indicator Power Status LED 1 x Green color LED HDD Activity LED 1 x Red color LED Watchdog Timer Output System reset Interval Programmable 1~255 sec Onboard I/O Front I/O Coastline 1 x HDD & PWR LED Connectors 2 x RS-232 / 422 / 485 as COM 1 and COM2 1 x USB device port by a mini-DIN connector 1 x 2-pole of Phoenix power input connector 1 x ATX power on/off switch Rear I/O Coastline 1 x VGA connector 1 x Dual-Link HDMI connector with flange as JHDMI 4 x USB 2.0 host port by 2 pairs of double mini-DIN connector as USB1~USB4 1 x RJ45 connector for Gigabit Ethernet connection as J1 3 x 3.5Ø audio jacks as Mic-in Line-in, and Speaker-out Onboard I/O Onboard I/O 2 of 2 x 5-pin headers for 2 x RS-232 as COM 3 and COM 4 Pin-headers Pin-headers 2 of 1 x 3-pin headers for 5V/12V selection of COM3 and COM4 1 of SATA data connector 1 of SATA power connector support of 5V for 2.5” HDD 1 of 2 x 6-pin header support 8-bit GPIO, with 5VDC and 12VDC power source 1 of 1 x 3-pin header for thermal sensor as SEN1 1 of 1 x 6-pin header for connection with VIA EMIO-1530 wireless LAN card 1 of 2 x 15-pin header for signal channel LVDS interface as LVDS1 1 of 1 x 3-pin header for LCD Power 3.3v/5V selection 1 of 2 x 5-pin header support PS2 keyboard/mouse interface 1 of 1 x 3-pin header for selecting the AT or ATX mode Onboard DC to DC Input Voltage Built-in onboard DC-to-DC converter Power Supply Accepts wide range of Power Input of DC 7V ~ 36V Supports AT and ATX mode, defatult support ATX mode Power Input Connector 1 x 2-pole Phoenix connector AT/ATX Selector Onboard AT/ATX switch by a 3-pin headers Fuse Rating 7 A / 125 V Heatsink Construction Aluminum modeling Dimensions (WxHxD) 230.45 mm x 34 mm x 124.8 mm Specifications Part Number EITX-3001-1N13A1 Physical Characteristics Form Factor Em-ITX Board Dimension 17 cm (W) x 12 cm (L) Weight 1 Kg (net weight of board plus heatsink only) Environmental Operating Temperature -10°C ~ 60 °C Specification Storage Temperature -20°C ~ 70 °C Operating Humidity 10% ~ 90%, relative humidity, non-condensing Software Compatibility Operation System Microsoft Windows XP, Windows 7, Microsoft Windows XP Embedded Standard, Windows Embedded Standard 7, Linux Debian 6 (Kernel 2.6.32) Ordering Information Part Number System Built-in CPU Description EITX-3001-1N13A1 1.3GHz Nano™ E 1.3GHz Nano™ E CPU Based Fanless Em-ITX board, with 1 x VGA, 1 x LVDS, 2 x RS-232/422/485, 2 x RS-232, 5 x USB 2.0 Host, 1 x USB Device, 1 x Resistive Touch, 1 x GbE, 1 x SATA, DC-in 7~36V EITX-3001-2N13A1 1.3GHz Nano™ E EITX-3001-1N13A1, with full cable kit Optional Accessories *Note: The optional accessories may have minimum ordering quantity limitation. Please contact VIA Sales representative for more details. External AC-to-DC Adapter and Power Cable WLAN USB Module Part Number Description Part Number Description 99G63-020246 AC-to-DC adapter, DC 19V/90W with 2-pole EMIO-1530-A0A1 802.11b/g Wireless LAN USB module for USA Phoenix Power Plug EMIO-1530-A1A1 802.11b/g Wireless LAN USB module for Europe 99G33-02032C Power cable, 180cm, USA type 99G33-02033C Power cable, 2-pin 180cm, Europe type Embedded OS (only available for OEM service) 99G33-02034C Power cable with PSE mark, 180 cm for Japan Part Number Description POS-MEXSLI-ENS00 Windows XP Embedded Standard Image & Functional I/O Cable License for EITX-3001 English Version Part Number Description POS-ME7SLI-ENS00Windows Embedded Standard 7 32-bit Image & License for EITX-3001 English Version 99G33-240165 SATA DATA cable Right Angle, with Latch POS-DLNXLI-ENS03 Debian Linux 6 Image & License for EITX-3001 99G33-020655 SATA Power cable, Only Support 5V for 2.5" English Version HDD 99G33-250074 Power cable, 2-pole Phoenix plug to DC-Jack Certificated RAM Module, Flash Disk, and 2.5” Hard Disk Drive 99G33-10048C USB to Mini USB cable Part Number Description 99G33-130012 PS/2 Keyboard and Mouse Y-Cable 99G06-010598 2GB DDR2 800MHz, 128Mx8 SDRAM SODIMM, 99G33-080185 Digital I/O cable Industrial Grade, 0°C ~ 85°C 99G33-290010 Thermal Sensor cable 99G06-010588 1GB DDR2 800MHz, 128Mx8 SDRAM SODIMM, 99G33-080127 1-port COM port cable Industrial Grade, 0°C ~ 85°C 99G33-02096K DC Power extension cable, AVT-VIA-044, 99G61-060011 1GB Compact Flash Disk, Industrial Grade, 20 cm -40°C ~ 85°C 99G33-02097K DC Power extension cable, AVT-VIA-045, 99G61-060021 2GB Compact Flash Disk, Industrial Grade, 20 cm -40°C ~ 85°C 99G33-300011 HDMI to DVI-D adapter cable 99G61-060031 4GB Compact Flash Disk, Industrial Grade, -40°C ~ 85°C Block Diagram Packing List Items for EITX-3001-1N13A1 1 x EITX-3001 board DC-INPUT 7V ~ 30 V 1 x Mini-jumper pack 1 x SATA data cable 1 x SATA power cable (Supports 2.5” TM PWM VIA Nano ISL9501 HDD only) CPU 1 x Power cable, 2-pole Phoenix plug to Clock Generator DC-Plug ICS9UM700 1 x USB to Mini USB cable VGA DDR2 SO-DIMM X 1 LVDS PATA CF Card Items for EITX-3001-2N13A1 HDMI AD9389B 1 x EITX-3001 board JMH330 SATA x1 PCI SATA Bridge 1 x Mini-jumper pack VX855 GLAN VT6122 1 x SATA data cable COM 1 RS232/RS422/RS485 Touch Panel 1 x SATA power cable (Supports 2.5” USBH x2 Controller COM 2 HDD only) LPC BUS RS232/RS422/RS485 WLAN F81865 1 x Power cable, 2-pole Phoenix plug to KB/MS COM 3 DC-Plug SPI BIOS COM 4 1 x USB to Mini USB cable USBH x4 Amp. HD VT1708B 1 x PS/2 Keyboard and Mouse Y-Cable USBD x1 1 x Digital cable 1 x Thermal Sensor cable 2 x COM port ribbon cable Dimensions 1 x DC Power extension cable, AVT- VIA-044, 20 cm 231.44 1 x DC Power extension cable, AVT- 19.15 VIA-045, 20 cm 21.57 160.00 9.15 4-M3-Tapping 6-M3-Tapping 186.00 5.00 4.00 4-Ø5 184.00 27.72 9.15 4-M3-Tapping 21.57 170.00 9.15 Unit: mm www.viaembedded.com * All product specifications are subject to change without notice. Update: June 27, 2012. 57.45 57.45 4.95 124.80 27.00 49.20 5.50 55.00 54.20 16.00 16.00 5.50 57.45 57.45 4.95 34.00

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products