VSBC-6t - VERSALOGIC - Elite.Parts

Description

Versalogic VSBC-6t CPU Board - Socket 7 Intel 266 MHz Intel Tillamook extended temperature EBX Single Board Computer with Ethernet, video and industrial I/O. 8 to 256 MB system RAM.

Part Number

VSBC-6t

Price

Request Quote

Manufacturer

VERSALOGIC

Lead Time

Request Quote

Category

EBX SINGLE BOARD COMPUTERS

Specifications

Analog Input

8-channel, 12-bit, single-ended, 6 microsecond, input range: ±5, ±10, 0 to +5V, 0 to +10V, channel independent

BIOS

General Software embedded BIOS with OEM enhancements

Board Size

5.75” x 8.00” x 1.75”; EBX Compliant

Board Type

EBX (5.25 in)

Bus Speed

CPU External:66 MHz; PCI, PC/104-Plus:33 MHz; PC/104:8 MHz

COM 1-2 Interface

RS-232, 16C550 compatible, 115K baud max

COM 3-4 Interface

RS-232/422/485, 16C550 compatible, 460K baud max

Compatibility

PC/104 – Full compliance; PC/104-Plus – Full compliance, 3.3V or 5V modules

CPU Height

1.25” with fan, 1.15” with heatsink

DRAM Interface

One 168-pin DIMM socket, 8 to 256 MB EDO or 3.3V SDRAM (66 MHz or PC-100). (Rev 4 and later PCBs only)

Ethernet Interface

10BaseT based on SMSC LAN91C96 chip. On-board RJ-45 Ethernet connector. Optional AUI interface

Flash / BBSRAM Interface

One 32-pin JEDEC DIP socket. Accepts battery-backed static RAM chip or M-Systems DiskOnChip. Chip accessed in 64K blocks

Floppy Disk Interface

One 34-pin connector, supports two floppy drives

Humidity

Less than 95%, noncondensing

IDE Interface

Two channels, standard 40-pin IDE. Supports up to four IDE devices. Designed to support newer high speed IDE Type 4 and Ultra DMA drives.

LPT Interface

Bi-directional/EPP/ECP compatible

Operating Temperature (free air, no airflow)

Standard versions:0°C to +60°C; Extended temperature version:–20°C to +85°C

Opto 22 / Digital Interface

16 channel, full compliance, ±24 ma outputs

Power Requirements (with 32 MB RAM, keyboard, mouse, running Win95 with Eth

+5V ±5% @ 2.4A typ. 11.9W; 3.3V or ±12V required by some expansion modules

Storage Temperature

–40°C to +85°C

System Reset

Vcc sensing, resets below 4.70V typ.; Watchdog timeout

Video Interface

Based on C&T 65550 chip. 2 MB VRAM standard; Resolutions to 1280x1024. Flat panel display interface

Datasheet

vsbc--9763355376.pdf

54 KiB

Download

Extracted Text

VSBC-6 Pentium-class Single Board Computer New Pentium-class EBX Single Board Tillamook Computer with ethernet, video and versions! industrial I/O. Features · · EBX compliant. 5.75” x 8.00” footprint · · Full Socket 7 CPU support · · 8 to 256 MB system RAM · · 256-512 KB level 2 cache · · 32-pin DiskOnChip socket · · 10BaseT Ethernet interface · · PCI video / flat panel support Description · · PC/104-Plus expansion site The VSBC-6 is a feature-packed single board computer · · Dual PCI based IDE controllers designed specifically for OEM control projects requir- ing fast processing, industrial I/O, flexible memory · · Dual USB interfaces options, and designed-in reliability and longevity (prod- · · 4 COM + 1 LPT port uct lifespan). - Two RS-232/422/485 selectable ports Full EBX compliance allows easy migration to future · · Keyboard and PS/2 mouse port boards or alternate sources. Enclosure or mounting · · Industrial I/O changes are not required when migrating between EBX - Analog input option (eight 12-bit channels) compatible products. - 16 channel Opto 22 compatible The VSBC-6 is fully compatible with a wide selection - Three spare 16-bit counter/timers of popular operating systems including most Windows and Real Time Operating Systems. Please call for more · · Watchdog timer information. · · Vcc sensing reset circuit Up to 256 MB of low power system RAM is supported · · Flash BIOS with OEM enhancements in a high-reliability latching DIMM socket. Application · · Latching I/O connectors programs and files can be stored in a bootable DiskOn- Chip Flash device. A battery-backed SRAM can be used · · Customizing available in lieu of the DiskOnChip. · · Extended temperature versions The VSBC-6 features high reliability design and con- struction including latching I/O connectors, watchdog timer, voltage sensing reset circuit, industrial long-life battery, and self-resetting fuse on the 5V supply to the keyboard, mouse, USB and Opto 22 I/O ports. This exceptional SBC was designed from the ground up for OEM applications with longevity and reliability as the focus. Each board is subjected to burn-in and com- plete functional testing and backed by a limited two- year warranty. It is fully supported by the VersaLogic design team. Both hardware and software (BIOS) cus- tomization are available in 100 unit quantities. 3888 Stewart Road, Eugene, OR 97402 · (541) 485-8575 · Fax (541) 485-5712 · info@versalogic.com · www.versalogic.com VSBC-6 Pentium-class Single Board Computer Power Requirements: (with 32 MB RAM, keyboard, Ordering Information mouse, running Win95 with Ethernet) VSBC-6xp . . . . . . . . . . . . . . . . . . . .SBC without analog inputs +5V ±5% @ 3.9A typ. 19.5W (VSBC-6c) VSBC-6xr . . . . . . . . . . . . . . . . . . . .SBC with analog inputs +5V ±5% @ 2.3A typ. 11.4W (VSBC-6s) x = Processor type. Specify one of the following: +5V ±5% @ 2.4A typ. 11.9W (VSBC-6t) c – 233 MHz Intel Pentium 3.3V or ±12V required by some expansion modules s – 266 MHz Intel Tillamook low power fanless System Reset: t – 266 MHz Intel Tillamook extended temperature Vcc sensing, resets below 4.70V typ. Note: Processor options b through h may not be appropriate Watchdog timeout for new designs, depending on required product life span. DRAM Interface: For more information, see the roadmap at One 168-pin DIMM socket, 8 to 256 MB EDO or 3.3V www.versalogic.com/support/rdmp/rdmp.asp SDRAM (66 MHz or PC-100). (Rev 4 and later PCBs Accessories only) VL-CBL-0501 . . . . . . . . . . . . . . . . Dual USB transition cable Flash / BBSRAM Interface: VL-CFA-1c . . . . . . . . . . . . . . Type I/II CompactFlash adapter One 32-pin JEDEC DIP socket. Accepts battery-backed VL-DEV-006 . . . . . . . . . . . . . . . . . . . . Development cable kit static RAM chip or M-Systems DiskOnChip. Chip VL-DOC-xxx . . . . . . . . xxx MB DiskOnChip Flash module accessed in 64K blocks. VL-ENCL-3 (VersaBox) . . . . . . . . . . Development enclosure Video Interface: VL-FDD-144 . . . . . . . . . . . . . . . . . Floppy drive (black face) Based on C&T 65550 chip. 2 MB VRAM standard. VL-HDD-1000 . . . . . . . . . . . . . . . . 3.5" IDE hard disk drive Resolutions to 1280x1024. Flat panel display interface. VL-HDW-104 . . . . . . . . . . . . . . . . . . . . . . SBC mounting kit IDE Interface: VL-HDW-201 . . . . . . . . . . . . . SBC & PC/104 extractor tool Two channels, standard 40-pin IDE. Supports up to four VL-LATCH-06 . . . . . . . . . . . . . . . . . . . . .Connector latch set IDE devices. Designed to support newer high speed IDE VL-MM 3S-xxx . . . . . . . . . . . .16-256 MB SDRAM module Type 4 and Ultra DMA drives. VL-PS200-ATX . . . . . . . . . . . . . Development power supply Floppy Disk Interface: One 34-pin connector, supports two floppy drives Specifications Ethernet Interface: 10BaseT based on SMSC LAN91C96 chip. On-board Specifications are typical at 25° C with 5.0V supply unless otherwise noted. RJ-45 Ethernet connector. Optional AUI interface Board Size: Analog Input: 5.75” x 8.00” x 1.75”; EBX Compliant 8-channel, 12-bit, single-ended, 6 microsecond, input CPU Height: range: ±5, ±10, 0 to +5V, 0 to +10V, channel indepen- 1.25” with fan, 1.15” with heatsink dent Storage Temperature: COM 1-2 Interface: – 40° C to +85° C RS-232, 16C550 compatible, 115K baud max Operating Temperature: (free air, no airflow) COM 3-4 Interface: Standard versions: 0° C to +60° C RS-232/422/485, 16C550 compatible, 460K baud max Extended temperature version: – 20° C to +85° C LPT Interface: See www.versalogic.com/products/ds.asp?pn=vsbc-6 Bi-directional/EPP/ECP compatible Opto 22 / Digital Interface: for details. Bus Speed: 16 channel, full compliance, ±24 ma outputs BIOS: CPU External: 66 MHz General Software embedded BIOS with OEM enhance- PCI, PC/104-Plus: 33 MHz ments PC/104: 8 MHz Compatibility: Humidity: PC/104 – Full compliance Less than 95%, noncondensing PC/104-Plus – Full compliance, 3.3V or 5V modules Specifications are subject to change without notice. Pentium is an Intel Corporation trademark. PC/104 is a trademark of the PC/104 Consortium. DiskOnChip is a trademark of M-Systems. 3888 Stewart Road, Eugene, OR 97402 · (541) 485-8575 · Fax (541) 485-5712 · info@versalogic.com · www.versalogic.com rev 7/02

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products