ATCA-7221, R3 AdvancedTCA Processor Blade Front page The Emerson Network Power ATCA-7221 processor blade delivers a combination of The ATCA-7221 processor performance, functionality and cost effi ciency to help drive the successful implemen- blade is designed to operate ® ® tation of next generation telecom networks. It builds on the AdvancedTCA (ATCA ) ™ within both the Centellis standard to provide the right product at the right time to meet the needs of the ™ 3000 and Avantellis 3000 telecom industry. series of communications Interior page servers The Emerson ATCA-7221 processor blade is designed to operate within both the ™ ™ Emerson Centellis 3000 and Avantellis 3000 series of communications servers. Dual Intel Xeon LV processors operating at 2.8 GHz in a two-way symmetric multipro- ° High performance processor blade with SMP support cessing (SMP) confi guration deliver outstanding performance. The ATCA-7221 blade is ideal for implementing almost any control plane applications for next generation ® ™ ° Dual 2.8 GHz Intel Xeon wireless and wireline telecommunications infrastructure equipment. LV processors ° Support for up to 16GB The ATCA-7221 blades are RoHS (6 of 6) compliant, eliminating the need for memory customers to incur the time, resource and expense associated with creating and/or converting existing product to meet this international requirement. ° Complete software operating environment including OS With dual Intel Xeon processors, the ATCA-7221 processor blade is the highest ° PICMG 3.0 Gigabit Ethernet performance processing blade in the AdvancedTCA form factor. It also provides base interface support ® Gigabit Ethernet interfaces to the PICMG 3.0 base interface and the PICMG 3.1 fabric ° PICMG 3.1, Option 1 and 2 interface in a dual star confi guration. This allows the base interface to be used for fabric interface support control, signaling, or management while the fabric interface can be used for high performance data transport, providing control and data traffi c separation. ° PMC site for I/O fl exibility ° SATA or SAS hard disk drive An array of memory options, including up to 16GB of main memory, SAS and SATA options storage interfaces and multiple hard drive options add to the performance and ™ ° Service Availability Forum fl exibility of the ATCA-7221 processor blade. (SA Forum) compliant HPI and AIS software interfaces ° Designed for NEBS and ETSI compliance Front page Interior page ATCA-7221 Block Diagram 800 MHz Intel Xeon LV Intel Xeon LV USB 2.8 GHz 2.8 GHz SATA Zone 3 RS-232 Flash Intel Intel 16GB Hance KBD/Mouse E7520 DDR2 Rapids PCI-Exp PCI-X Update USB 2xGbE Intel Channel PXHD RS-232 PCI-X Fabric Zone 2 Interface ETH PCI-X 4xGbE 16-port Base GbE 2xGbE Interface Switch 2xGbE PMC PHY 2xGbE IPMC IPMI Zone 1 –48 VDC DC/DC Standard Networking Support The ATCA-7221 AdvancedTCA blade can be confi g- ured with a variety of software offerings, from simple The ATCA-7221 processor blade provides PICMG 3.0 fi rmware to fully integrated and verifi ed software base interface connectivity in a dual star confi guration operating environments. using standard Gigabit Ethernet technology. The PICMG 3.1 fabric interface is also supported and FIRMWARE several confi gurations are available depending on This blade-level support is offered for customers application bandwidth requirements. taking on the integration and verifi cation responsibili- ° PICMG 3.1, Option 1 – Single, redundant Gigabit ties. It provides all the boot and IPMC fi rmware Ethernet pair (1.0Gbps) required for an ATCA blade. ° PICMG 3.1, Option 2 – Dual, redundant Gigabit Ethernet pairs (2.0Gbps) CENTELLIS 31KX SOFTWARE PACKAGE This software package is based on a standard Carrier Processor Complex Grade Linux (CGL) distribution, MontaVista CGE 3.1, with remote management via SNMP v2/3. The Surrounding the dual Intel Xeon SMP processor switching software is based on Wind River TMS 2.1.1 confi guration is an array of high performance providing: components that combine to form a powerful ° Wireline speed switching at 10/100/1000B/s processor complex. ° IEEE 802.3x Flow Control (full duplex) FEATURES INCLUDE: ° IEEE 802.1d Spanning Tree Protocol ° Up to 16.0GB, ECC-protected DDR2 SDRAM. ° IEEE 802.1Q VLAN Supported confi gurations: 2, 4, 8 and 16GB ° IEEE 802.1p Class of Service ® ° Intel E7520 high performance chipset ° Dual 64MB fl ash, dual bank architecture ° SATA or SAS hard disk drive (HDD) on RTM ° Dual, external Ultra320 SCSI interfaces on RTM ° Dual external Fibre Channel interfaces on RTM Software Support 2 Front page Interior page Available system S/W services: Rear Transition Modules ° DHCP server located on the ATCA-F103 and Emerson offers two rear transition modules (RTMs) for ATCA-F300 switch blades responds to shelf internal the ATCA-7221 processor blade for the ultimate DHCP requests fl exibility in storage interconnect and capacity options ° Remote Update services to update the fi rmware as well as external Gigabit Ethernet connectivity. of all IPMCs and Shelf Management Controller ° PXE-based boot of diskless clients PMC Site ° Rolling upgrade of application software The ATCA-7221 blade includes a single width CENTELLIS 3000 SOFTWARE PACKAGES IEEE1386.1-2001 PMC site. The PMC site supports This software package comes complete with, and is PCI-X 64-bit 133 MHz capable PMC modules. verifi ed with, a standard CGL distribution; MontaVista Hardware CGE 4.0, the market leader in Carrier Grade Linux. MontaVista CGE 4.0 comes complete with all required PROCESSOR Linux Support Packages (LSPs) and Basic Blade ° Dual 2.8 GHz Intel Xeon LV processors in an Services software. SMP confi guration ° 1MB L2 on-chip cache Basic Blades Services (BBS) software is provided ° 800 MHz frontside bus to enable a set of ATCA hardware and software ® components into a fully integrated and verifi ed ° Intel E7520 system controller telecom platform. The Centellis 3000 platform is MEMORY ready for customers HA middleware and application environment. ° Up to 16GB, ECC-protected SDRAM. Supported confi gurations – 2GB, 4GB, 8GB, 16GB Basic Blade Services (generic to all ATCA blades): ° 256Byte CMOS NVRAM for BIOS confi guration ° Hardware Platform Management including local ° 1.0MB boot fl ash, dual bank architecture IPMC, LED, EKeying and blade extraction software ° 32MB application fl ash, dual bank architecture ° Switch management ° 16MB CPU reset-persistent memory ° Firmware upgrade utility COUNTERS/TIMERS ° Local management access (SNMP, CLI) ° Real-time clock RELEVANT STANDARDS ° Programmable watchdog timer ° Linux Foundation PCI MEZZANINE CARD ° SA Forum ° PMC site with 64-bit 133 MHz PCI-X interface Å Hardware Platform Interface (HPI) – rev. 1.0, A .01.01 ° Dual Gigabit Ethernet interface ° For more information on the Centellis and Avantellis BASE AND FABRIC INTERFACES 3000 platforms, please refer to the Centellis 3000 and Avantellis 3000 series datasheets. ° Dual star confi guration ° PICMG 3.0 base interface compliant, Gigabit Intelligent Platform Management Control Ethernet (1.0Gbps) ° PICMG 3.1 fabric interface compliant, Gigabit The PICMG 3.0 AdvancedTCA standard specifi es a low- Ethernet level, environmental management architecture referred to as intelligent platform management Å PICMG 3.1, Option 1 – Single, redundant Gigabit Ethernet pair (1.0Gbps) interface (IPMI). The ATCA-7221 blade implements this functionality using an off-the-shelf hardware and Å PICMG 3.1, Option 2 – Dual, redundant Gigabit software based IPM controller that monitors all local, Ethernet pairs (2.0Gbps) blade-specifi c environmental information. Manage- ment access to this information is provided through the SA Forum defi ned HPI interface. 3 Front page Interior page EXTERNAL INTERFACES ° Front Panel Å USB 2.0, mini USB Type AB (2) Å Serial, RJ-45 (2) Å 10/100/1000BaseT Ethernet, RJ-45 (1) ° Via Optional RTM (RTM-ATCA-7221/SCS/6E) Å USB 2.0, Type A (2) Å Serial, RJ-45 (2) Å SAS interface (1) Å Keyboard/mouse, PS2 (1) Å SCSI interface (2) Å Gigabit Ethernet (2) Å SAS HDD slot (1) ° Via Optional RTM (RTM-ATCA-7221/FC/6E) Å USB 2.0, Type A (2) Å Serial, RJ-45 (2) Å Keyboard/mouse, PS2 (1) Å SATA HDD slot (1) POWER REQUIREMENTS ° Dual-redundant –48V rail ° Input range: 39.5 – 72 VDC ° Typical power: 120 – 140W THERMAL CHARACTERISTICS ° Operating range: –5° C to 55° C RELEVANT BLADE SIZE ° 8U form factor, 280 mm X 322.5 mm, single slot RELEVANT STANDARDS ° PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) ° PICMG 3.1, Option 1 and 2 Ordering Information Please contact a Emerson sales representative to order this product. 4 Front page Interior page Regulatory Compliance Item Description Designed to comply with NEBS GR-63-CORE, NEBS Physical Protection, Level 3 GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety — Generic Criteria for Network Telecommunications Equipment. Level 3, Equipment Type 2 Designed to comply with ETSI ETSI Storage, ETS 300 019-2-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations ETSI Transportation, ETS 300 019-2-2, Class 2.3 equipment, Public Transportation ETSI Operation, ETS 300 019-2-3, Class 3.2 equipment, Partly Temperature Controlled Locations Designed to comply with Acoustic ETS-300-753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment EMC EN-300-386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) FCC 47 CFR Part 15 Subpart B (US), Class A EMC Directive 89/336/EEC (EU) AS/NZS 3548 (Australia/New Zealand), Limits and Methods of Measurement of SOLUTION SERVICES Radio Disturbance Characteristics of Information Technology Equipment Emerson Network Power VCCI Class A (Japan), Voluntary Control Council for Interference by Information provides a portfolio of Technology Equipment solution services optimized to Compliance to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme. meet your needs throughout Safety Marked with U.S. NRTL, Canadian Safety and CE Mark. the product lifecycle. Design services help speed time-to- Safety of information technology equipment, including electrical business equipment market. Deployment services include global 24x7 technical ETS 300-132-2 Environmental Engineering (EE); Power supply interface at the support. Renewal services input to telecommunications equipment; Part 2: Operated by direct current (dc) enable product longevity DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL and technology refresh. on the restriction of the use of certain hazardous substances in electrical and Plus solution extras include electronic equipment (RoHS) RoHS/WEEE compliance enhanced warranty and repairs. DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE) PICMG, AdvancedTCA and the AdvancedTCA logo are registered trademarks of the PCI Industrial Computer Manufacturers Group. Service Availability is a proprietary trademark used under license. Intel is a registered trademark and Xeon is a trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. This document identifi es products, their specifi cations, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confi rm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Business-Critical Continuity, Emerson Network Power and Emerson Network Power the Emerson Network Power logo are trademarks and Sales Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720, Shanghai, China +86 215292 5693 service marks of Emerson Electric Co. Paris, France +33 1 69 35 77 00 , Tokyo, Japan +81 3 5424 3101, Munich, Germany +49 (0) 89 9 608 2 333 ©2008 Emerson Electric Co. Hong Kong, China +852 2966 3210, Tel Aviv, Israel +972 3 568 4387 EmersonNetworkPower.com/embeddedcomputing ATCA7221R3-D3 1/08