54 Series 54 Series PRESSURE, VACUUM AND TEMPERATURE featureS • Compact Size • Wide Selection of Adjustable Ranges: Pressure: 30” Hg Vac to 6000 psi (-1 to 413,7 bar) Temperature: -130 to 650°F (-90 to 343.3°C) • Choice of One or Two Switch Outputs • Adjustable or Narrow Deadband Options • Reference Dial or Hex Screw Set Point Adjustment LEADERS IN SAFETY, ALARM & SHUTDOWN 5 4 - B - 0 5 54 Series overview features • Compact size The 54 Series offers the OEM a combination of reliable performance and low cost. Available in pressure and temperature versions, with • Choice of one or two switch single or dual SPDT outputs and enclosed or open frame (skeleton) outputs construction, the 54 Series family provides design versatility. • Reference dial or hex screw-type The 54 has been field-proven in a wide variety of OEM applications, setting including medical, laboratory, fire protection and heating equipment. • Optional 1/2” NPT (male) by 1/8” NPT (female) polysulfone® pressure connection • Optional external manual reset • NEMA 1 or open frame (skeleton) versions for OEM applications • Brass bellows models Remote mounting temperature model Direct mounting Pressure model temperature model with reference dial Polysulfone® is a registered trademark of Amoco 2 u n i t e d e l e c t r i c c o n t r o l s 5 4 - B - 0 5 54 Series 54 Series specifications Storage temperature -65 to 160°F (-54 to 71°C) ambient temperature limitS Pressure Models Models 126-164, 610-614: -40 to 160°F (-40 to 71°C); Models 22-28; 16008, 16009: 0 to 160°F (-18 to 71°C) Temperature Models -40 to 160°F (-40 to 71°C). Set point typically shifts less than 1% of range for a 50°F (28°C) ambient temperature change. Shock Set point repeats after 15 G, 10 millisecond duration Vibration Set point repeats after 2.5 G, 5-500 CPS encloSure claSSification Types C54, C54A, B54, F54, E54, J54, J54A, H54: complies with NEMA 1 requirements. Types C54S, B54S, F54S, E54S, J54S, J54AS, H54S: not applicable Set point repeatabilitY Pressure Models Models 22-28, 16008-16009, 126-164: ± 1% of full scale range; Models 610-614: ± 1.5% of full scale range Temperature Models ± 1% of full scale range Switch output One or two SPDT snap action switch(es); dual switch may be separated up to 100% of range; switches may be wired “normally open” or “normally closed” electrical rating 15A 125/250/480 VAC resistive except models 16008-16009 – 20A 480/VAC. Electrical switches have limited DC capabilities. Consult UE for additional information. encloSure material Lexan® black finish for Types J54, J54A, H54, B54, C54, C54A, E54, F54 only weight Approximately 12 oz. electrical connection Types J54 & H54, C54, C54A, B54, E54, F54: 7/8” diameter hole; Type J54A: 1-1/16” diameter hole preSSure connection Models 22-28, 16008, 16009: 1/4” NPT (male); 126-164, 610-614: 1/4” NPT (female) temperature aSSemblY Bulb and Capillary: 6 feet copper or 304 stainless steel capillary Immersion Stem: Brass temperature fill Non-toxic oil temperature deadband Typically 1% of range under laboratory conditions (70°F circulating bath at rate of 1/2°F per minute change) approvals united StateS and canada europe type J54, J54a, h54 low Voltage directive (lVd) (2006/95/ec) ul listed, cul certified UEC compliant to LVD Pressure: UL 508, CSA C22.2 No. 14, file # E42272 Products rated lower than 50 VAC and 75 VDC are outside of type J54S, J54aS, h54S the scope of the LVD ul recognized, cul recognized The Low Voltage Directive does not apply to open frame Pressure: UL 508, CSA C22.2 No. 14, file #E42272 (skeleton) models. type b54, c54, e54, f54 pressure equipment directive (ped) (97/23/ec) Compliant to PED ul listed, cSa certified Products rated lower than 7.5 psi are outside the scope of the Temperature: UL 873, file # E10667; PED CSA C22.2 No. 0 & 24, file # LR7814 type b54S, c54S, e54S, f54S ul recognized, cSa certified Temperature: UL 873, file # E10667; CSA C22.2 No. 0 & 24, file # LR7814 Lexan® is a registered trademark of SABIC Innovative Plastics 5 4 - B - 0 5 u n i t e d e l e c t r i c c o n t r o l s 3 54 Series pressure model chart Model Adjustable Set Point Deadband Over Proof Range Range Pressure* Pressure** Low end of range on fall; High end of range on rise psi (unless noted) bar (unless noted) psi (unless noted) bar (unless noted) psi bar psi bar J54, J54a, J54S, J54aS, h54, h54S Buna N diaphragm and O-Ring with 1/4” NPT (male) aluminum pressure connection; limited to process temperature below 200°F 22 30” Hg Vac to 0 -1 to 0 1 to 3.5” Hg Vac 33,9 to 118, 5 mbar 0 0 50 3,4 24 3 to 30 0,2 to 2,1 0.4 to 1.5 27,6 to 89,6 mbar 50 3,4 200 13,8 25 10 to 100 0,7 to 6,9 1 to 2.5 68,9 to 172,4 mbar 100 6,9 above above 27 30 to 300 2,1 to 20,7 1.3 to 4 89,6 to 275,8 mbar above above set point set point { { { { 28 50 to 500 3,4 to 34,5 1.5 to 6 103,4 to 344,7 mbar set point set point Max 600 Max 41,4 Brass bellows with nickel-plated brass 1/4” NPT (female) pressure connection; Model 126 has a zinc-plated steel spring exposed to media 126 30” Hg Vac to 0 -1 to 0 0.2 to 0.9” Hg 6,8 to 30,5 mbar 3 0,2 5 0,3 137 0 to 80 “wc 0 to 199,1 mbar 1 to 8 “wc 2,5 to 19,9 mbar 3 0,2 5 0,3 144 0 to 20 0 to 1,4 0.1 to 0.5 6,9 to 34,5 mbar 20 1,4 25 1,7 146 0 to 30 0 to 2,1 0.1 to 0.6 6,9 to 41,4 mbar 30 2,1 40 2,8 152† 0 to 50 0 to 3,4 0.1 to 0.7 6,9 to 48,3 mbar 50 3,4 75 5,2 156 0 to 100 0 to 6,9 0.2 to 0.8 13,8 to 55,2 mbar 100 6,9 125 8,6 164 0 to 200 0 to 13,8 0.3 to 2 20,7 to 137,9 mbar 200 13,8 200 13,8 J54, J54S 303 stainless steel piston and Buna N O-Ring with 1/4” NPT (female) pressure connection (not recommended for gas service since drying of the O-Ring can allow bleeding of the medium into the atmosphere) 610 75 to 1000 5,2 to 68,9 30 to 150 2,1 to 10,3 6000 413,7 10,000 689,5 612 125 to 3000 8,6 to 206,8 40 to 250 2,8 to 17,2 6000 413,7 10,000 689,5 614 700 to 6000 48,3 to 413,7 50 to 400 3,4 to 27,6 6000 413,7 10,000 689,5 Adjustable Set Point Range Adjustable Deadband Over Range Pressure* Proof Pressure** Buna N diaphragm and O-Ring with 1/4” NPT (male) brass pressure connection; includes adjustable deadband microswitch. † † 16008 30 to 300 2,1 to 20,7 10 to 30 0,7 to 2,1 100 6,9 200 13,8 † † † 16009 30 to 300 2,1 to 20,7 10 to 30 0,7 to 2,1 above above above above set point set point set point, set point { { { { max 600 max 41,4 *over range pressure: The Maximum pressure that may be applied continuously without causing damage and maintaining set point repeatability. **proof pressure: The maximum pressure to which a pressure sensor may be occasionally subjected, which causes no permanent damage. The unit may require calibration (e.g., start-up, testing). † Model not available for types H54, H54S † † model not available for type J54. † † † Model not available for type J54S. 4 u n i t e d e l e c t r i c c o n t r o l s 5 4 - B - 0 5 54 Series 54 Series temperature model chart Model Adjustable Set Point Max. Temperature Scale*** Stem Size Range Division °F °C °F °C °F °C NPT x BT (inches) b54, b54S, c54, c54S, c54a, c54aS, Brass immersion stem 103 0 to 225 -17.8 to 107.2 250 121.1 10 5 3/8 x 2-1/8 109 200 to 425 93.3 to 218.3 425 218.3 10 5 3/8 x 2-1/8 OD x Length e54, f54, Copper bulb and capillary D20BC -130 to 120 -90 to 48.9 170 76.7 10 5 3/8 x 4-1/2 D21BC 0 to 150 -17.8 to 65.6 200 93.3 5 5 3/8 x 6-7/8 D22BC 50 to 300 10 to 148.9 350 176.7 10 5 3/8 x 4-1/2 D23BC 150 to 650 65.6 to 343.3 700 371.1 25 10 3/8 x 3-5/8 e54, f54, Stainless steel bulb and capillary D20BS‡ -130 to 120 -90 to 48.9 170 76.7 10 5 3/8 x 4-1/2 D21BS 0 to 150 -17.8 to 65.6 200 93.3 5 5 3/8 x 6-7/8 D22BS 50 to 300 10 to 148.9 350 176.7 10 5 3/8 x 4-1/2 D23BS 150 to 650 65.6 to 343.3 700 371.1 25 10 3/8 x 3-5/8 e54S, f54S, Copper bulb and capillary D21BC 0 to 150 -17.8 to 65.6 200 93.3 5 5 3/8 x 6-7/8 D22BC 50 to 300 10 to 148.9 350 176.7 10 5 3/8 x 4-1/2 D23BC 150 to 650 65.6 to 343.3 700 371.1 25 10 3/8 x 3-5/8 e54S, f54S, Stainless steel bulb and capillary D21BS 0 to 150 -17.8 to 65.6 200 93.3 5 5 3/8 x 6-7/8 D22BS 50 to 300 10 to 148.9 350 176.7 10 5 3/8 x 4-1/2 D23BS 150 to 650 65.6 to 343.3 700 371.1 25 10 3/8 x 3-5/8 ‡ Not available Type F54 *** Applies to Types B54, B54S, E54, E54S only 5 4 - B - 0 5 u n i t e d e l e c t r i c c o n t r o l s 5 54 Series how to order building a part number Select a type Select a model Select an option Refer to the “Type” section below. Refer to the “Model Charts.” Refer to the “Options” section. Determine type number based on switch Determine model based on adjustable range, Determine option number based on switch output, enclosure, adjustment and reference. deadband and proof pressure. output, optional materials or other product enhancements. Fill in the type portion of your part number Fill in the model portion of your part number with the corresponding number. with the corresponding number. Fill in the option portion of your part number with the corresponding number. Leave “option” portion blank if no options are needed. FOR MULTIPLE OPTIONS: Call United Electric Controls. tYpe deScription - preSSure modelS J54: NEMA 1 enclosure; One SPDT output; internal hex adjustment with no reference dial J54A: NEMA 1 enclosure; Two SPDT outputs; internal hex adjustment with no reference dial J54S: Skeleton construction; One SPDT output; hex adjustment with no reference dial J54AS: Skeleton construction; Two SPDT outputs; hex adjustment with no reference dial H54: NEMA 1 enclosure; One SPDT output; internal adjustment with reference dial H54S: Skeleton construction; One SPDT output; adjustment with reference dial temperature modelS C54: NEMA 1 enclosure; Immersion stem; one SPDT output; internal hex adjustment with no reference dial C54A: NEMA 1 enclosure; Immersion stem; two SPDT outputs; internal hex adjustment with no reference dial C54S: Skeleton construction; Immersion stem; one SPDT output; hex adjustment with no reference dial C54AS: Skeleton construction; Immersion stem; Two SPDT outputs; hex adjustment with no reference dial B54: NEMA 1 enclosure; Immersion stem; one SPDT output; internal adjustment with reference dial B54S: Skeleton construction; Immersion stem; one SPDT output; adjustment with reference dial F54: NEMA 1 enclosure; Bulb and capillary; one SPDT output; internal hex adjustment with no reference dial F54S: Skeleton construction; Bulb and capillary; one SPDT output; hex adjustment with no reference dial E54: NEMA 1 enclosure; Bulb and capillary; one SPDT output; internal adjustment with reference dial E54S: Skeleton construction; Bulb and capillary; one SPDT output; adjustment with reference dial Switch optionS* code deScription 0140 Gold contacts, 1A 125 VAC resistive. NOT AVAILABLE ON MODELS 16008-16009. 0500 Close deadband, 5A 125/250 VAC resistive. NOT AVAILABLE ON B54, J54A, B54S, C54, C54S, C54A, C54AS, E54S, F54, F54S, AND MODELS 16008-16009. 1520 Adjustable deadband, 15A 125/250/480 VAC resistive. Adjustable wheel changes rise setting only. If adjustment of fall setting is required, use primary adjustment. NOT AVAILABLE ON TYPES J54A, J54AS, H54, H54S, PRESSURE MODELS 610-614, 16008-16009 & TEMPERATURE VERSIONS 1530 External manual reset, 15A 125/250/480 VAC resistive; reset on increasing pressure or temperature only. NOT AVAILABLE ON TYPES J54A, J54S, J54AS, H54S,B54S, C54A, C54AS, C54S, E54S, F54S OR MODELS 610-614, 16008-16009 2000 20A 125/250/480 VAC resistive. NOT AVAILABLE ON MODELS 16008-16009. * All switches have limited DC capabilities. Consult factory for details. 6 u n i t e d e l e c t r i c c o n t r o l s 5 4 - B - 0 5 54 Series 54 Series general optionS code deScription M201 Factory set one switch; specify increasing or decreasing pressure or temperature and set point. NOT AVAILABLE ON TYPES J54A, J54AS, C54A, C54AS AND MODELS 16008-16009. M202 Factory set two switches; specify increasing or decreasing pressure or temperature and set point. NOT AVAILABLE ON TYPES J54, J54S, H54, H54S, B54, B54S, C54, C54S, E54, E54S, F54, F54S M270 Calibrated dial in Celsius. NOT AVAILABLE ON PRESSURE VERSIONS AND TYPES B54, B54S, C54, C54S, C54A, C54AS, F54, F54S M277 Range indicated on nameplate in kPa or MPa. NOT AVAILABLE ON TEMPERATURE VERSIONS AND MODELS 16008-16009. M278 Range indicated on nameplate in kg/cm2. NOT AVAILABLE ON TEMPERATURE VERSIONS AND MODELS 16008-16009. M444 Paper ID tag. NOT AVAILABLE MODELS 16008-16009. M446 Stainless steel ID tag & wire attachment. NOT AVAILABLE MODELS 16008-16009. M540 Viton® construction (deadband and low end range may increase slightly. Consult factory); Wetted parts include Viton® diaphragm and O-Ring plus standard connection material. NOT AVAILABLE MODELS 126-164, 16008- 16009 OR TEMPERATURE VERSIONS preSSure connection optionS M501 Polysulfone® pressure connection 1/2” NPT (male) x 1/8” NPT (female). NOT AVAILABLE MODELS 126-164, 610- 614, 16008-16009 OR TEMPERATURE VERSIONS options for temperature models union connectorS For all bulb & capillary switches Option Replacement Number Description Brass W027 SD6213-27 1/2 ” NPT w/ 3/4” bushing W045 SD6213-45 3/4” NPT W051 SD6213-51 1/2” NPT 304 Stainless Steel W028 SD6213-28 1/2” NPT w/ 3/4” bushing W046 SD6213-46 3/4” NPT W050 SD6213-50 1/2” NPT thermowellS For all bulb & capillary switches Brass W075 SD6225-75 3/4” bushing adapter, 4” BT W191 SD6225-191 1/2” NPT, 4” BT W118 SD6225-118 3/4” bushing adapter, 7” BT W192 SD6225-192 1/2” NPT, 7” BT 316 Stainless Steel W076 SD6225-76 3/4” NPT, 4.5” BT W193 SD6225-193 1/2” NPT, 4.5” BT W119 SD6225-119 3/4” NPT, 7.5” BT W177 SD6225-177 1/2” NPT, 7.5” BT For all Immersion stem switches W141 SD6225-141 1/2” NPT x 1 9/16” BT, brass W146 SD6225-146 1/2” NPT x 1 9/16” BT, 316 stainless steel optional lengthS: Optional immersion stem lengths to 15” may be available in brass, with or without 316 st/st thermowell. Consult UE for availability. Optional capillary length to *50’ may be available in copper or 304 st/st. Consult UE for availability. Armor or Teflon® capillary protection may be available to lengths less than or equal to capillary length. Consult UE for availability. *Consult UE regarding repeatability and ambient effects on capillary lengths over 30’. Viton® is a registered trademark of E.I. duPont Nemours and Company. 5 4 - B - 0 5 u n i t e d e l e c t r i c c o n t r o l s 7 54 Series dimensional drawings pressure models Type H54, J54 and J54A Models 22 - 28, 16009 Type J54S, Models 22 - 28 Type J54AS, Models 22 - 28 Type H54S, 3 J54S, Model 16008 1 4 Models 22 - 28 7 23 1 32 64 N.C. N.O. COM. 39 64 #8-32 TERMINAL SCREW 3 PLACES CL. FOR #6 SCREW 2 HOLES (WALL MT'G.) 1 4 16 9 2 16 7 2 32 LABEL 1/4 NPT 29 32 WRENCH FLATS 15 32 25 1 3 1 DIA. 64 16 8 u n i t e d e l e c t r i c c o n t r o l s 5 4 - B - 0 5 54 Series 54 Series Type H54, J54, and J54A Models 126-164 Type J54 Models 610 - 614 Type J54S Models 610 - 614 5 4 - B - 0 5 u n i t e d e l e c t r i c c o n t r o l s 9 54 Series dimensional drawings temperature models Types B54, C54 Type C54A Types B54, C54, C54A Type B54S Type C54S Type C54AS All dimensions stated in inches (millimeters) 10 u n i t e d e l e c t r i c c o n t r o l s 5 4 - B - 0 5 54 Series 54 Series Types E54 and F54 Type F54S bulb Size models inches mm E54 & F54 D20BC, D20BS, D22BC, D22BS 4.50 114.3 D21BC, D21BS 6.86 174.6 D23BC, D23BS 3.63 92.1 E54S & F54S D21BC, D21BS 6.86 174.6 D22BC, D22BS 4.50 114.3 D23BC, D23BS 3.63 92.1 Type E54S 5 4 - B - 0 5 u n i t e d e l e c t r i c c o n t r o l s 11 u.S. SaleS officeS international officeS recommended practiceS and warningS United Electric Controls CHINA United Electric Controls Company recommends careful consideration 31 Old Stage Road United Electric Controls, Shanghai Office of the following factors when specifying and installing UE pressure Hampton Falls, NH 03844 Room 1011, 10th Flr, and temperature units. Before installing a unit, the Installation Phone: 617-899-1132 Huai Hai Zhonghua Building and Maintenance instructions provided with unit must be read and email: northeastsales@ueonline.com No. 885, Renmin Road, Luwan District understood. Shanghai 200010, P.R. China • To avoid damaging unit, proof pressure and maximum temperature United Electric Controls Phone: +8621-6255 8059 limits stated in literature and on nameplates must never be 28 N. Wise Ave. email: chinasales@ueonline.com exceeded, even by surges in the system. Operation of the unit up to Freeport, IL 61032 maximum pressure or temperature is acceptable on a limited basis Phone: 815-341-2588 United Electric Controls, Beijing Office (e.g., start-up, testing) but continuous operation must be restricted Room 1006, Jainhao International Bldg. email: midwestsales@ueonline.com to the designated adjustable range. Excessive cycling at maximum Block D, No. 116 United Electric Controls Zizhuyuanlu, Haidian District pressure or temperature limits could reduce sensor life. 1022 Vineyard Drive • A back-up unit is necessary for applications where damage to Beijing, China 100089 Conyers, GA 30013 Phone & Fax: +86-10-5893-0551 a primary unit could endanger life, limb or property. A high or Phone: 770-335-9802 email: beijingsales@ueonline.com low limit switch is necessary for applications where a dangerous email: southeastsales@ueonline.com runaway condition could result. EUROPE United Electric Controls • The adjustable range must be selected so that incorrect, United Electric Controls 5829 Grazing Court inadvertent or malicious setting at any range point cannot result 05-806 Komorow Mason, OH 45040 in an unsafe system condition. Kujawska 5, Poland Phone: 513-535-5486 • Install unit where shock, vibration and ambient temperature Phone: +48 22 499 4804 email: midatlanticsales@ueonline.com fluctuations will not damage unit or affect operation. When email: easterneuropesales@ueonline.com applicable, orient unit so that moisture does not enter the United Electric Controls INDIA enclosure via the electrical connection. When appropriate, this 102 Salazar Court United Electric entry point should be sealed to prevent moisture entry. Clayton, CA 94517 #402, Aries Avenue - 1 • Unit must not be altered or modified after shipment. Consult UE Phone: 925-408-5997 United Colony, Sama, Baroda if modification is necessary. email: westcoastsales@ueonline.com Baroda (Gujarat), India • Monitor operation to observe warning signs of possible damage Phone: +91 (-265) -2788654 United Electric Controls to unit, such as drift in set point or faulty display. Check unit 27 Summit Terrace email: indiasales@ueonline.com immediately. Sparta, NJ 07871 ASIA-PACIFIC • Preventative maintenance and periodic testing is necessary for Phone: 973-271-2550 United Electric Controls, Far East critical applications where damage could endanger property or email: easternsales@ueonline.com No. 1-2-2, 2nd Floor personnel. Jalan 4/101C United Electric Controls • Electrical ratings stated in literature and on nameplate must not Cheras Business Centre 33018 Weatherby Court be exceeded. Overload on a switch can cause damage, even on 56100 Kuala Lumpur, Malaysia Fulshear, Texas 77441 the first cycle. Wire unit according to local and national electrical Phone: 603-9133-4122 Phone: 832-457-6138 codes, using wire size recommended in installation sheet. email: asiapacific@ueonline.com email: southwestsales@ueonline.com • Do not mount unit in ambient temp. exceeding published limits. MEXICO limited warrantY United Electric Controls Seller warrants that the product hereby purchased is, upon delivery, Privada Fernando San Pedro 305 free from defects in material and workmanship and that any such Col El Naranjal 89349 product which is found to be defective in such workmanship or Tampico, Tamaulipas Mexico material will be repaired or replaced by Seller (Ex-works, Factory, Phone: +52 833-116-7637 canada Watertown, Massachusetts. INCOTERMS); provided, however, that this email: latinamericasales@ueonline.com EASTERN warranty applies only to equipment found to be so defective within 68 Mosley Crescent RUSSIA & SCANDINAVIA a period of 24 months from the date of manufacture by the Seller. Brampton, Ontario United Electric Controls, Moscow Seller shall not be obligated under this warranty for alleged defects Canada L6Y 5C8 Elninskaya str., 15-140 which examination discloses are due to tampering, misuse, neglect, Phone: 905-455-5131 Moscow, 121552 Russia improper storage, and in any case where products are disassembled FAX: 905-455-5131 Phone: +7 (495) 792-88-06 by anyone other than authorized Seller’s representatives. EXCEPT FOR email: russiansales@ueonline.com THE LIMITED WARRANTY OF REPAIR AND REPLACEMENT STATED ABOVE, SELLER DISCLAIMS ALL WARRANTIES WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. limitation of Seller’S liabilitY Seller’s liability to Buyer for any loss or claim, including liability incurred in connection with (i) breach of any warranty whatsoever, expressed or implied, (ii) a breach of contract, (iii) a negligent act or acts (or negligent failure to act) committed by Seller, or (iv) an act for which strict liability will be inputted to seller, is limited to the “limited warranty” of repair and/or replacement as so stated in our warranty of product. In no event shall the Seller be liable for any special, indirect, consequential or other damages of a like general nature, including, 180 Dexter Avenue, P.O. Box 9143 without limitation, loss of profits or production, or loss or expenses of Watertown, MA 02471-9143 USA any nature incurred by the buyer or any third party. Telephone: 617 926-1000 Fax: 617 926-2568 UE specifications subject to change without notice. http://www.ueonline.com CP07121500 Be sure to visit www.ueonline.com for the latest information.