Call North America: 954-346-2442 • sales@unipower-corp.com Call Europe: +44(0) 1903 768200 • info@unipower-europe.com CORPORA TION 1U-High, Front End Power System Racks ® Up to 2400W for PowerCassette TPCG or TPCM Modules FEATURES � Holds Three TPCG or TPCM Modules � Case Only 11.56 Inches (294 mm) Deep � AC Line Cord Ready � Front or Rear AC Entry � Individual AC Inputs � 12, 24 or 48VDC Output TPCMR1U3 � Hot-Swap Operation Rear AC Access Shown � Up to 1600W 2+1 Redundant � Up to 2400W Non-Redundant RACK ORDERING GUIDE � Only 1U-High (1.72 mm) RACK RACK MAX. � 19- or 23-Inch Rack Mounting MODULE CONNECTIONS MODEL NO. CURRENT NO. � Stackable for Expansion TPCMR1U3 3 All Rear Entry 150A � +5V, 250mA Standby Output TPCMR1U3-E AC Front Entry DC Rear 2 3 120A � I C Serial Data Bus Option (for TPCM Option E only) Output Signals Rear Entry � Module Present Signal 2 For I C version of rack, add suffi x -Z to model number. � Control & Monitoring Signals � Rear Output & Signal Connections TPCG MODULE ORDERING GUIDE MAX. OUTPUT OUTPUT OUTPUT AC INPUT MODEL POWER VOLTAGE CURRENT RANGE NUMBER 370W 12VDC 30.8A 85-264VAC TPCG3000 SAFETY STANDARDS 400W 24VDC 16.7A 85-264VAC TPCG5000 450W 48VDC 9.4A 85-264VAC TPCG7000 • UL60950 • CSA22.2 No.60950 TPCM MODULE ORDERING GUIDE • EN60950 MAX. OUTPUT OUTPUT OUTPUT AC INPUT MODEL POWER VOLTAGE CURRENT RANGE NUMBER 350W 12VDC 54.2A 85-264VAC TPCM3000 700W 24VDC 29.2A 85-264VAC TPCM5000 800W 48VDC 16.7A 85-264VAC TPCM7000 ACCESSORIES FRONT AC ACCESS MODULES* AC Line Cords: 6 ft. long with IEC60320 C-14 connector 125VAC with NEMA 5-15 plug.3x14AWG Pt. No. 364-1409-0000 MAX. OUTPUT OUTPUT OUTPUT AC INPUT MODEL POWER VOLTAGE CURRENT RANGE NUMBER 205VAC with NEMA 6-20 plug. 3x14AWG Pt. No. 364-1413-0000 230VAC unterminated, 3 x 18AWG Pt. No. 364-1421-0000 480W 12VDC 40.0A 85-264 VAC TPCM3000E 525W 24VDC 21.9A 85-264 VAC TPCM5000E Consult sales for alternate line cord confi gurations. 600W 48VDC 12.5A 85-264 VAC TPCM5000E Relay Alarm Adaptor: * Front AC entry with reduced output currents for 3-unit racks. Plugs into rear mounted signal connector and converts DC Good output for each Pt. No. 009-1005-0000 module into Form-C relay contact output. For a complete system, order a rack plus the required number of modules. (See separate datasheet for full details.) For complete specifi cations on the modules see PCG/TPCG or PCM/TPCM ® PowerCassette data sheets. TWO-YEAR WARRANTY www.unipowercorp.com Copyright © 2003-2010 Unipower Corporation. All rights reserved. � North America: 954-346-2442 • sales@unipower-corp.com Europe: +44(0) 1903 768200 • info@unipower-europe.com CORPORA TION SPECIFICATIONS, 150-AMPERE FRONT OR REAR AC ACCESS 19-INCH RACKS 17.19 (437) TPCMR1U3 1.72 FRONT VIEW (43.7) � A BC BACK VIEW GND J4 +V -V J3 J2 J1 DC OUT AC IN TPCMR1U3-E FRONT VIEW AB C BACK VIEW J4 GND J4 +V -V OUTPUT: Copper bus bars with no. 1/4-20 studs and nuts. Positronics SD25FOS500X INPUT: AC inlets are IEC60320 C14 with FC7520D pins J4 PIN CONNECTIONS NOTES: All electrical connections are made to the rear of the standard rack. For PIN FUNCTION PIN FUNCTION 1. Option E, the AC inputs are made to the C14 inlets on the front of each 1 Inhibit 14 AC Power Fail - A Option E module. There is one AC inlet for each module. Connector J1 goes to module A, connector J2 to module B and 2 Overtemp. Warning - A* 15 DC Power Good - A* connector J3 to module C. 3 Current Monitor - A 16 AC Power Fail - B Module A is on the left, module B in the center and module C on the right 2. 4 Overtemp. Warning - B* 17 DC Power Good - B* as seen from the rack front. 5 Current Monitor - B* 18 AC Power Fail - C The outputs of all PowerCassette® modules are connected in parallel in 3. 6 Overtemp. Warning -C* 19 DC Power Good - C* the rack. 7 Current Monitor - C* 20 Module Present -A The rack depth is 11.56 inches (294mm). 4. 8 +5V Standby 21 Module Present -B 9 SDA 22 Module Present - C The input voltage range is 85-264 for maximum power in either 5. redundant or non-redundant operation. 10 Current Share 23 - Sense 11 +Sense 24 V Adj. - A The Module Present outputs (J4 pins 20, 21 and 22) are grounded (to 6. -Sense) when the module is plugged in and open when the module is out. 12 V Adj. - B 25 V Adj. - C 13 SCLK For further details on the control signals on J4, see the 7. PowerCassette® PCG/TPCG or PCM/TPCM data sheet or operating 2 *These pins are open when I C option is used. manuals. NOTE: Standby return is connected to -Sense lead. 2 For details on I C data (J4 pins 9 and 13) see PCM/ TPCM operating Current rating of +5V standby is 250mA. 8. manual or contact factory. All signals are referenced to -Sense lead. TPCMR1U3 MAX. OUTPUT WITH MODULES 3 MODULES - NON-REDUNDANT TPCG TPCM TPCM-E POWER 12VDC 92.4A 1110W 12VDC 150A 1800W 12VDC 120A 1440W 24VDC 50.1A 1200W 24VDC 87.5A 2100W 24VDC 65.6A 1575W 48VDC 28.2.0A 1350W 48VDC 50.0A 2400W 48VDC 37.5A 1800W 3 MODULES - 2+1 REDUNDANT TPCG TPCM TPCM-E 12VDC 61.6A 740W 12VDC 108.4A 1300W 12VDC 80.0A 960W 24VDC 33.4A 800W 24VDC 58.3A 1400W 24VDC 43.8A 1050W 48VDC 18.8A 900W 48VDC 33.3A 1600W 48VDC 25.0A 1200W ALL DIMENSIONS IN INCHES (mm.) All specifi cations subject to change without notice. tpcmr1u3-ds-revB-04-06-10 UNIPOWER CORPORATION • 3900 Coral Ridge Drive, Coral Springs, Florida 33065, UNITED STATES • Tel: 954-346-2442 • Fax: 954-340-7901 • sales@unipower-corp.com UNIPOWER EUROPE • Parkland Business Centre, Chartwell Road, Lancing, BN15 8UE, ENGLAND • Tel: +44(0)1903 768200 • Fax: +44(0)1903 764540 • info@unipower-europe.com � �