UNIPOWER RPCG48/8
Specifications
Analog Voltage Adjust
0 to +5V
Current & Voltage
8/15/22A@54.4VDC | 15/25/33A@27.2VDC | 27/45/50A@13.6VDC
EMI Filter, Conducted
FCC20780 pt. 15J Curve B | EN55022 Curve B
Fast Transients
EN61000-4-4
Frequency
47-63Hz
Holdup Time
20msec.
Input Current, Full Load
4.2/8.1/11.9A@120VAC | 2.2/4.2/6.2A@230VAC
Input Protection
Internal Fuse, 20A
Inrush Current Limiting
50A Peak
Line & Load Regulation, Max.
2.0%
Overvoltage Protection
48V Out: 59V | 24V Out: 29V | 12V Out: 15V
Power Factor
0.99
Standby output
+5V@250mA
Surges
EN61000-4-5
Total Harmonic Distortion, Max.
5%
Voltage Adjustment Range
48V Nominal: 44.0-58.0VDC | 24V Nominal: 22.0-29.0VDC | 12V Nominal: 11.0-14.5VDC
VOLTAGE RANGE
85-264VAC
Features
- -20°C to +70°C Operation
- 0.99 Power Factor
- 82-87% Efficiency
- Class B EMI Filter
- Hot Swappable
- Integral ORing Diodes
- LED Indicators
- One Rack Unit High: 1.72”
- Output Voltage Range: 11-14.5, 44-58 or 22-29V
- Power Density to 15W/Cu. Inch
- Up to 66A at 54.4V, 99A at 27.2V or 150A at 13.6V
- Wide Range Input: 85-264VAC
Datasheet
Extracted Text
RADIAN SERIES RECTIFIER MODULES & SHELVES DESCRIPTION Unipower Telecom’s Radian Series are hot-swappable, modular rectifiers which produce up to 22 amperes at 54.4VDC (48V version), 33 amperes at 27.2VDC (24V version) or 50 amperes at 13.6VDC (12V version). There are nine different RPCM & RPCP models. These switching rectifier modules RPCG are extremely compact with high power density (up to 15W/cu. inch), taking up only 1.72 inches (one RU) of rack space. They are ideally suited for wireless telecom sites and networking applica- tions. 1RU High LVD73/23/EEC Three rectifier modules in a companion 19-inch shelf produce up to 66A at 54.4VDC, RECTIFIER MODULES 99A at 27.2VDC or 150A at 13.6VDC. Oper- NOMINAL FACTORY SET MAX. OUTPUT ated in a 2+1 redundant mode, the output MODEL OUTPUT OUTPUT CURRENT current is up to 44A at 54.4VDC, 66A at RPCP48/22 48VDC 54.4V 22A 27.2VDC or 100A at 13.6VDC. The rectifier RPCP24/33 24VDC 27.2V 33A modules have automatic load sharing and RPCP12/50 12VDC 13.6V 50A ORing diodes so they can be added or RPCM48/15 48VDC 54.4V 15A replaced while the system is operating. The RPCM24/25 24VDC 27.2V 25A output voltage of all modules can be con- RPCM12/45 12VDC 13.6V 45A trolled simultaneously over 44-58, 22-29 or 11- RPCG48/8 48VDC 54.4V 8A 14.5 VDC from a remote 0V to +5V analog RPCG24/15 24VDC 27.2V 15A input. RPCG12/27 12VDC 13.6V 27A Green LEDs indicate AC power good and DC 19-INCH SHELVES power good. The units also have control and AC RECTIFIER monitoring features and a +5V standby output. MODEL HEIGHT DEPTH CONN. MODULES 0 0 Operating temperature range is -20 C to -70 C. TPCMR1U3 1U (1.72”) 11.56” 3 TPCM/TPCG C14 TPCPR1U3A 1U (1.72”) 12.66” 3 TPCP Term. Blk. There are mating 19-inch shelves for the TPCPR1U3B 1U (1.72”) 13.15” 3 TPCP C20 RPCG, RPCM and RPCP rectifier modules. TPCPR1U3C 1U (1.72”) 14.88” 3 TPCP C20 See back page for more information. FEATURES SAFETY CERTIFICATIONS ¿ One Rack Unit High: 1.72” 0 0 UL60950 ¿ -20 C to +70 C Operation CSA22.2, No. 60950 ¿ Wide Range Input: 85-264VAC EN60950 ¿ Up to 66A at 54.4V, 99A at 27.2V or 150A at 13.6V ¿ 0.99 Power Factor TWO-YEAR WARRANTY ¿ Output Voltage Range: 11-14.5, 44-58 or 22-29V ¿ 82-87% Efficiency OPTION ¿ Power Density to 15W/Cu. Inch ¿ Hot Swappable CODE DESCRIPTION ¿ Integral ORing Diodes 2 Z I C Serial Data Bus ¿ Class B EMI Filter NOTE: Add Option Code as suffix to model number. ¿ LED Indicators 2 ¿ I C Serial Data Option www.unipowertelecom.com NORTH AMERICA CALL: 954-346-2442 • EUROPE CALL: +44 (0)1903 768200 t SPECIFICATIONS, RADIAN RPCG, RPCM & RPCP SERIES o Typical at Nominal Line, Full Load and 25 C Unless Otherwise Noted (RPCG/RPCM/RPCP). INPUT SAFETY STANDARDS ..................... UL60950, CSA22.2 No. 60950, EN60950 Voltage Range ................................................................................ 85-264VAC Power Factor ............................................................................................ 0.99 STATUS INDICATORS Total Harmonic Distortion, Max. ................................................................. 5% AC Good ......................................................... Green LED & Logic LO Output Frequency .......................................................................................... 47-63Hz DC Good .......................................................... Green LED & Logic LO Output Inrush Current Limiting ..................................................................... 50A Peak Input Current, Full Load .............................................. 4.2/8.1/11.9A@120VAC ENVIRONMENTAL ............................................... 2.2/4.2/6.2A@230VAC Operating Temp. Range ........................................................... -20°C to +70°C Output Current Derating .............................................. 2.5%/°C, 50°C to 70°C EMI Filter, Conducted ............................................ FCC20780 pt. 15J Curve B Storage Temp. Range ............................................................. -40°C to + 85°C .......................................................... EN55022 Curve B Fast Transients ........................................................................... EN61000-4-4 Humidity .............................................................. 0% to 95%, Non-Condensing Surges ......................................................................................... EN61000-4-5 ESD ................................................. Bellcore GR-1089-Core and EN61000-4-2 o Analog Voltage Adjust ........................................................................ 0 to +5V MTBF, 35 C (Bellcore) .............................................................. 200,000 Hours Input Protection .................................................................. Internal Fuse, 20A Cooling .................................................................... Integral Ball Bearing Fans OUTPUT PHYSICAL SPECIFICATIONS 1 Current & Voltage ............................................................ 8/15/22A@54.4VDC Case Material, Rectifier Module ........................................................ Aluminum ........................................................... 15/25/33A@27.2VDC Shelf ......................................................................... Aluminum ........................................................... 27/45/50A@13.6VDC Dimensions, Inches (mm) Rectifier Module ............................................... 1.60 H x 5.00 W x 10.00 D Voltage Adjustment Range, 48V Nominal .................................. 44.0-58.0VDC (40.6 x 127 x 254) 24V Nominal ................................. 22.0-29.0VDC 12V Nominal ................................. 11.0-14.5VDC 19” Shelf, TPCMR1U3 .................................... 1.72 H x 19.00 W x 11.56 D Standby Output ........................................................................... +5V@250mA (44 x 483 x 294) Line & Load Regulation, Max. ................................................................. 2.0% 19” Shelf, TPCPR1U3 .................................... 1.72 H x 19.00 W x 13.15 D Holdup Time ........................................................................................ 20msec. (44 x 483 x 334) Overvoltage Protection, 48V Out .............................................................. 59V Weight 24V Out .............................................................. 29V Rectifier Module ........................................................... 3.15 lbs. (1.43 kg.) 12V Out .............................................................. 15V 19” Shelf ...................................................................... 3.75 lbs. (1.70 kg.) Filtering: Wideband Noise, 20MHz BW NOTE: 1. Voltage set at factory. 48V Out, P-P ...................................................................................500mV J4 SIGNAL CONNECTOR 24V Out, P-P ...................................................................................250mV 12V Out, P-P ...................................................................................125mV J4 Voice Band Noise ............................................................................. <32dBrnC Positronic SD25F0S5OOX Current Limit .................................................................... 105% Rated Current with FC7520D pins Efficiency ............................................................................................ 82-87% J4 PIN CONNECTIONS HOT-SWAP RECTIFIER MODULE PIN FUNCTION PIN FUNCTION 1 Inhibit 14 AC Power Good - 1 2 Overtemp. Warning - 1* 15 DC Power Good - 1* 3 Current Monitor - 1* 16 AC Power Good - 2 4 Overtemp. Warning -2* 17 DC Power Good - 2* 5 Current Monitor - 2* 18 AC Power Good - 3 6 Overtemp. Warning - 3* 19 DC Power Good - 3* 7 Current Monitor - 3* 20 Module Present -1 8 +5V Standby 21 Module Present - 2 9 SDA 22 Module Present - 3 10 Current Share 23 - Sense 11 +Sense 24 Remote Adjust - 1 12 Remote Adjust - 2 25 Remote Adjust - 3 13 SCLK 2 * These pins are open when I C option is used. NOTE: Standby return is connected to -Sense SHELVES lead. Current rating of +5V standby is 250mA. All 17.19 signals are referenced to -Sense lead. (437) RADIAN 19-INCH SHELVES 1.72 There is one shelf model for the RPCG (43.7) and RPCM modules and three shelf t models for the RPCP modules. The A, 1 2 3 B, and C versions of the TPCPR1U3 shelf have rear housings that extend 1.10”(27.9mm), 1.59” (40.4mm) and A 3.32” (84.3mm), respectively, beyond the 11.56” (294mm) rack depth. The “C” version of the TPCPR1U3 shelf includes an AC line filter with each IEC 60320 C20 AC inlet. For further B, C information, see the shelf data sheets. Brackets are available for mounting the J1 J2 J3 J4 +V -V GND 19-inch shelves in a 23-inch rack. Order DC Out 775-1451-0000 (set of two). AC In ALL DIMENSIONS IN INCHES (mm). (C20 inlets shown) All specifications subject to change without notice. rpcp-revH-08-11-04.pdf DIV. OF UNIPOWER CORP. • 3900 Coral Ridge Drive, Coral Springs, Florida 33065, USA • Tel: 954-346-2442 • Fax: 954-340-7901 • sales@unipower-corp.com UNIPOWER EUROPE • Parkland Business Centre, Chartwell Road, Lancing, BN15 8UE, ENGLAND • Tel: +44(0)1903 768200 • Fax: +44(0)19 03 764540 • info@unipower-europe.com t t
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the RPCG48/8 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods