Stand-Alone Power-Over-Ethernet 100BASE-TX to 100BASE-FX stand-alone media converter Fast Ethernet SFEPE101x-1x0 Power-Over-Ethernet PSE Media Converter Ordering Information Power over CAT5 to Remotely Located Devices SFEPE1011-100: AC Powered PSE SFEPE1011-110: DC Powered PSE 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB Transition’s AC or DC powered PoE media con- SFEPE1013-100: AC Powered PSE verters are Power Sourcing Equipment (PSE) and SFEPE1013-110: DC Powered PSE are fully compatible with Powered Devices (PD) 100BASE-TX (RJ-45) [100 m/328 ft.] that comply with the IEEE802.3af: 2003 standard. to 100BASE-FX 1300nm multimode (SC) The converters also include a PD signature sens- [2 km/1.2 mi.] Link ing and power monitoring features per the IEEE Budget: 11.0 dB 802.3af standard. SFEPE1014-100: AC Powered PSE SFEPE10xx-1xx products can operate in two SFEPE1014-110: DC Powered PSE modes: IEEE 802.3af mode as well as “legacy 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) mode”. In the IEEE 802.3af mode the PoE is fully [20 km/12.4 mi.] Link Budget: 16.0 dB compatible with devices that comply with the IEEE802.3af standard. The PoE converter is also Optional Accessories (sold separately) capable of inserting power on either the spare Specifications pairs or data pairs of the MDI. Mounting Options In the “legacy mode” PoE can be configured WMBD-P for reverse polarity, 12 VDC, 24 VDC, or 48 Standards IEEE Std. 802.3; IEEE Std. 802.3af DIN Rail Mount Bracket POE VDC power insertion; as well as for other non- Switches 1&2: Set voltage output on twisted pair IEEE802.3af compatible PDs. WMBL 3: IEEE 802.3af mode/Legacy mode Wall Mount Bracket 4.0” [102 mm] Different voltages & modes are switch selectable. 4: Voltage polarity 5: MDI power on signal pairs/spare pairs 6: Enable/disable Auto-negotiation Features 7: Enable/disable Pause 8: Enable/disable Link Pass Through 4 Internal AC or DC power supply 9: Enable/disable Far-End-Fault 4IEEE802.3af Power-Over-Ethernet 4Enables enterprises to provide 10: Enable/disable AutoCross™ Compatible Mode power to network devices over Status LEDs PWR (power): Lit for normal operation 4Legacy Mode (Non IEEE802.3af) MDI Fault: ON = over-current detected the existing CAT5 data connection. MDI ON: ON = MDI port supplying power 4 12, 24, or 48 VDC PSE Output Voltage 4 TX Link: ON = Link on copper port Combine data received over a with Reverse Polarity Selection TX Act: Flashing = data activity on copper link fiber optic link with -48 VDC 4Signal Pair and Spare Pair Power Insertion FX Link: ON = Link on fiber port power; providing power to Data FX Act: Flashing = data activity on fiber link 4 Over-Current Protection Terminal Equipment (DTE); Dimensions Width: 7.3” [185 mm] 4Under-Current Detection Power Devices (PD) over Depth: 4.4” [112 mm] 4 Minimum Load Sensing Height: 1.2” [30 mm] unshielded twisted pair cable 4 Fault Protection Input Power Models SFEPE10xx-100: 90 – 250 VAC Internal (Power Cord Supplied) 4Exceeds IEEE802.3af ripple requirements on PSE MDI power leads Models SFEPE10xx-110: 18 – 60 VDC; 24 – 48 VAC Internal 4Max 16.8 Watts Power output capacity at Power Consumption 45 Watts Max legacy 48 VDC Operating Temperature 0 – 50°C [32° – 122°F] 4 PSE MDI Power Enable/Disable Storage Temperature -25° – 85°C [-13° – 185°F] 4Auto-Negotiation Environment 5 – 95% humidity non-condensing; 4AutoCross™ [ altitude 0 – 10,000 ft. 4 Link Pass Through Shipping Weight 2 lbs. [0.90 kg] 4Far-End-Fault (FEF) Regulatory Compliance EN55022:1994+A1:1996+A2:1997 Class A; FCC Part 4 Automatic Link Restoration 15 Subpart B; UL 1950 4 Pause Warranty Lifetime Power-Over-Ethernet 100BASE-TX to 100BASE-FX