TRANSITION NETWORKS E-100BTX-FX-N-02(SC)
Specifications
Compliance
CISPR22/EN55022; EN55024; EN60950 Class A;FCC Class A; CE Mark
Dimensions
E-TBT-FRL-N-02(xx) & E-100BTX-FX-N-02(xx):Width: 0.8” [19 mm], Depth: 4.8” [121 mm], Height: 4.8” [121 mm], E-TBT-FRL-NLP-02(xx) & E-100BTX-FX-NLP-02(xx):Width: 0.8” [19 mm], Depth: 4.8” [121 mm], Height: 3.1” [79 mm]
Environment
0°C – 50°C;5% – 95% humidity non-condensing;0 – 10,000 ft. altitude
Power Consumption
E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx): >450mA, E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx): 600mA
Power Source
PCI edge connector
Shipping Weight
1 lb. [0.45 kg]
Standards
IEEE Std. 802.3
Status LEDs
E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx):Power: Lit for normal operation, LKF: Link Fiber, LKC: Link Copper, RXF: Receive Fiber, RXC: Receive Copper, E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx):LED1: Steady - Copper link, LED2: Steady - Fiber link
Switches
E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx):S1: Switch to enable/disable LinK Pass Through, E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx):S1: Auto-Negotiation On/Off, S2: Pause On/Off, S3: LPT On/Off, S4: FEF On/Off
Warranty
Lifetime
Features
- Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
- Auto-Negotiation (802.3u)
- AutoCross Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Draws power directly from PCI slot; no power supply needed
- Easily installs inside PC or file server; no configuration required; no drivers to install.
- Far End Fault (FEF)
- Far End Fault (FEF) A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
- Link Pass Through Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- No need to replace existing NICs
- Pause (IEEE 802.3xy) Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Provides LEDs for easy network monitoring
- Saves space over traditional stand-alone converters
Datasheet
Transition Networks=E-100BTX-FX-N-02=datasheet1-966788581.pdf
932 KiB
Extracted Text
PCI-Powered Converter Ethernet or Fast Ethernet Twisted Pair to Fiber PCI-based media converters E-TBT-FRL-Nxx-02(xx) & E-100BTX-FX-Nxx-02(xx) PCI-Powered Copper to Fiber Media Converters Extended Network Distance Ordering Information Standard Profile Cards E-TBT-FRL-N-02(ST) 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm multimode (ST) [2 km/1.2 mi.] Link Budget: 13.5 dB E-TBT-FRL-N-02(SC) 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm multimode (SC) [2 km/1.2 mi.] Link Budget: 13.5 dB E-100BTX-FX-N-02 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB E-100BTX-FX-N-02(SC) 100BASE-TX (RJ-45) [100 m/328 ft.] Features to 100BASE-FX 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB Deliver low cost, fiber optic connectivity to the desktop Specifications with these full-featured PCI powered media converters, E-100BTX-FX-N-02(SM) designed to install directly inside a workstation or file 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm single mode (SC) server and mount into any slot on a standard PCI. No Standards IEEE Std. 802.3 [20 km/12.4 mi.] Link Budget: 16.0 dB configuration is required; making installation a breeze. Status LEDs Since power is drawn directly from the PCI slot, no ad- E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx): ditional power supply is needed, nor is there any CPU Low Profile Cards Power: Lit for normal operation utilization. E-TBT-FRL-NLP-02(ST) LKF: Link Fiber 10BASE-T (RJ-45) [100 m/328 ft.] 42 sizes to accommodate both standard and low LKC: Link Copper to 10BASE-FL 850nm multimode (ST) RXF: Receive Fiber profile PCI slots [2 km/1.2 mi.] Link Budget: 13.5 dB RXC: Receive Copper 4 AutoCross™ [ E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx): E-TBT-FRL-NLP-02(SC) 4 LED1: Steady = Copper link Link Pass Through 10BASE-T (RJ-45) [100 m/328 ft.] LED2: Steady = Fiber link 4 Easily installs inside PC or file server; no to 10BASE-FL 850nm multimode (SC) configuration required; no drivers to install [2 km/1.2 mi.] Link Budget: 13.5 dB Switches 4 E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx): Provides LEDs for easy network monitoring E-100BTX-FX-NLP-02 S1: Switch to enable/disable LinK Pass Through 4 Saves space over traditional stand-alone 100BASE-TX (RJ-45) [100 m/328 ft.] E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx): converters while providing a more secure to 100BASE-FX 1300nm multimode (ST) S1: Auto-Negotiation On/Off installation [2 km/1.2 mi.] Link Budget: 11.0 dB S2: Pause On/Off 4 No need to replace existing NICs E-100BTX-FX-NLP-02(SC) S3: LPT On/Off 4 Draws power directly from PCI slot; no power 100BASE-TX (RJ-45) [100 m/328 ft.] S4: FEF On/Off supply needed to 100BASE-FX 1300nm multimode (SC) Dimensions [2 km/1.2 mi.] Link Budget: 11.0 dB 4 Universal PCI Compliant, supports both 3.3V and E-TBT-FRL-N-02(xx) & E-100BTX-FX-N-02(xx): 5V signaling environments E-100BTX-FX-NLP-02(SM) Width: 0.8” [19 mm] 100BASE-TX (RJ-45) [100 m/328 ft.] E-100BTX-FX-N-02(xx) & Depth: 4.8” [121 mm] to 100BASE-FX 1310nm single mode (SC) Height: 4.8” [121 mm] E-100BTX-FX-NLP-02(xx) only [20 km/12.4 mi.] Link Budget: 16.0 dB E-TBT-FRL-NLP-02(xx) & E-100BTX-FX-NLP-02(xx): 4Auto-Negotiation Width: 0.8” [19 mm] 4 Depth: 4.8” [121 mm] Far-End-Fault Height: 3.1” [79 mm] 4Automatic Link Restoration Power Consumption 4Pause E-TBT-FRL-N-02(xx) & E-TBT-FRL-NLP-02(xx): >450mA E-100BTX-FX-N-02(xx) & E-100BTX-FX-NLP-02(xx): 600mA Fiber-to-the-Desktop: Connect an existing 10BASE-T Power Source PCI edge connector or 100BASE-TX PC, workstation or file server directly Environment 0°C – 50°C; to a fiber optic backbone in either full or half-duplex by 5% – 95% humidity non-condensing; bringing the fiber directly to the device. Simply connect 0 – 10,000 ft. altitude the twisted pair port to the existing twisted pair NIC to Shipping Weight 1 lb. [0.45 kg] create a safe, effective, space-saving solution. Compliance CISPR22/EN55022; EN55024; EN60950 Class A; Extend Network Distance: Up to 2 km using multi- FCC Class A; CE Mark mode fiber or up to 2 km using single mode fiber. Warranty Lifetime Ethernet or Fast Ethernet Twisted Pair to Fiber PCI-Powered Converter
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the E-100BTX-FX-N-02(SC) have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Transition Networks E-100BTX-FX-05(104) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BAS...
Transition Networks E-100BTX-FX-05(105) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BAS...
Transition Networks E-100BTX-FX-05(106) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BAS...
Transition Networks E-100BTX-FX-05(107) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BAS...
Transition Networks E-100BTX-FX-05(XLW) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BAS...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods