E-100BTX-FX-05(101) - TRANSITION NETWORKS

Image of TRANSITION NETWORKS E-100BTX-FX-05(101)

Description

Transition Networks E-100BTX-FX-05(101) Ethernet Switch - 100BASE-TX (RJ-45) [100 m/328 ft.], 100BASE-FX 1550nm TX/1310nm RX single fiber single mode (SC) [20 km/12.4 mi.]

Part Number

E-100BTX-FX-05(101)

Price

Request Quote

Manufacturer

TRANSITION NETWORKS

Lead Time

Request Quote

Category

MEDIA CONVERTERS / EXTENDERS / CROSS-CONNECTS

Specifications

Dimensions

Width: 3.0” [76 mm], Depth: 4.7” [119 mm], Height: 1.0” [25 mm]

Environment

0 – 50°C, 5% – 95% humidity non-condensing, 0 – 10,000 ft. altitude

Jumpers Jumper

Block 1: AutoCross enable

Power

External AC/DC required: 12 VDC, 0.5 A, unregulated, standard

Regulatory Compliance

FCC Class A, EN55024, EN55022 Class A, EN61000, CE Mark

Safety compliance

Wall Mount Power Supply:UL Listed and CSA certified

Shipping Weight

2 lbs. [0.90 kg]

Standards

IEEE Std. 802.3 100BASE-FX, 100BASE-TX

Status LEDs PWR (Power)

SDF or LKF (Link Fiber), SDC or LKC (Link Copper), RXF (Receive Fiber), RXC (Receive Copper)

Switches

SW1: Auto-Negotiation On/Off, SW2: Pause TX On/Off, SW3: Link Pass Through On/Off, SW4: Far-End-Fault On/Off

Warranty

Lifetime

Features

Auto-Negotiation
AutoCross [
Automatic Link Restoration
Far-End-Fault (FEF)
Link Pass Through
Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan
Pause
Round trip delay of only 40 bit times - far below the Class II rating of 92 bit times

Datasheet

Transition Networks=E-100BTX-FX-05=datasheet1-869480482.pdf

914 KiB

Download

Extracted Text

100BASE-TX to 100BASE-FX see also: Fast Ethernet 100BASE-TX to 100BASE-FX Point System™ Slide-In-Module Media Converters stand-alone media converter Fast Ethernet E-100BTX-FX-05(xxxx) Fast Ethernet Media Converter Extend Network Distance Recommended use in pairs E-100BTX-FX-05(100) 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm TX/1550nm RX single fiber single mode (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB E-100BTX-FX-05(101) 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1550nm TX/1310nm RX single fiber single mode (SC) single fiber model [20 km/12.4 mi.] Link Budget: 19.0 dB E-100BTX-FX-05(102) 4Extend Network Distance 100BASE-TX (RJ-45) [100 m/328 ft.] Used in pairs, this media converter can extend to 100BASE-FX 1310nm TX/1550nm RX distances between two twisted pair switches or single fiber single mode (SC) a switch and a server up to 2 km over multimode [40 km/24.9 mi.] Link Budget: 25.0 dB fiber or up to 120 km over single mode fiber. E-100BTX-FX-05(103) 4Connect Remote Devices 100BASE-TX (RJ-45) [100 m/328 ft.] The converters will automatically re-establish link when connected to two Using one media converter, a switch with a to 100BASE-FX 1550nm TX/1310nm RX 10/100 auto-negotiating switches, after the fault condition has been cor- single fiber single mode (SC) copper port can be connected to a switch with rected. With other manufacturers’ converters the user must intervene to [40 km/24.9 mi.] Link Budget: 25.0 dB an existing fiber interface. re-establish link. E-100BTX-FX-05(104) Features 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm TX/1550nm RX 4 Operates under heavy traffic loads without single fiber single mode (SC) Ordering Information [60 km/37.3 mi.] Link Budget: 26.0 dB excess heat, so there is no need for a failure-prone internal fan E-100BTX-FX-05(105) 4 100BASE-TX (RJ-45) [100 m/328 ft.] Round trip delay of only 40 bit times E-100BTX-FX-05 to 100BASE-FX 1550nm TX/1310nm RX 100BASE-TX (RJ-45) [100 m/328 ft.] - far below the Class II rating of 92 bit times single fiber single mode (SC) to 100BASE-FX 1300nm MM (ST) 4 Auto-Negotiation [60 km/37.3 mi.] Link Budget: 26.0 dB [2 km/1.2 mi.] Link Budget: 11.0 dB 4 AutoCross™ [ E-100BTX-FX-05(106) E-100BTX-FX-05(SC) 4 Link Pass Through 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm TX/1550nm RX 4 Far-End-Fault (FEF) to 100BASE-FX 1300nm multimode (SC) single fiber single mode (SC) 4 [2 km/1.2 mi.] Link Budget: 11.0 dB Pause [80 km/49.7 mi.] Link Budget: 33.0 dB 4 Automatic Link Restoration E-100BTX-FX-05(LC) E-100BTX-FX-05(107) 100BASE-TX (RJ-45) [100 m/328 ft.] 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (LC) to 100BASE-FX 1550nm TX/1310nm RX [2 km/1.2 mi.] Link Budget: 11.0 dB single fiber single mode (SC) Specifications E-100BTX-FX-05(MT) [80 km/49.7 mi.] Link Budget: 32.0 dB 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (MT-RJ) [2 km/1.2 mi.] Link Budget: 14.5 dB Standards IEEE Std. 802.3 100BASE-FX, 100BASE-TX Optional Accessories (sold separately) E-100BTX-FX-05(SM) Switches SW1: Auto-Negotiation On/Off 100BASE-TX (RJ-45) [100 m/328 ft.] SW2: Pause TX On/Off Wide Input (24 - 60 VDC) Power Supplies to 100BASE-FX 1310nm SM (SC) SW3: Link Pass Through On/Off SPS-2460-CC [20 km/12.4 mi.] Link Budget: 16.0 dB SW4: Far-End-Fault On/Off Piggy Back Power Supply E-100BTX-FX-05(SMLC) Jumpers Jumper Block 1: AutoCross™ enable SPS-2460-SA 100BASE-TX (RJ-45) [100 m/328 ft.] Stand-Alone Power Supply Status LEDs PWR (Power) to 100BASE-FX 1310nm SM (LC) [20 km/12.4 mi.] Link Budget: 17.3 dB SDF or LKF (Link Fiber) Mounting Options SDC or LKC (Link Copper) E-MCR-05 E-100BTX-FX-05(LH) RXF (Receive Fiber) 12-Slot Media Converter Rack 100BASE-TX (RJ-45) [100 m/328 ft.] RXC (Receive Copper) to 100BASE-FX 1310nm SM (SC) RMS19-SA4-01 [40 km/24.9 mi.] Link Budget: 26.0 dB Dimensions Width: 3.0” [76 mm] 4-Slot Media Converter Shelf Depth: 4.7” [119 mm] E-100BTX-FX-05(XL) WMBD Height: 1.0” [25 mm] 100BASE-TX (RJ-45) [100 m/328 ft.] DIN Rail Bracket 5.0” [127 mm] to 100BASE-FX 1310nm SM (SC) Power External AC/DC required: 12 VDC, [60 km/37.3 mi.] Link Budget: 29.0 dB WMBD-FS 0.5 A, unregulated, standard DIN Rail Bracket (flat, small) 3.1” [79 mm] E-100BTX-FX-05(LW) Environment 0 – 50°C, 5% – 95% humidity non-condensing, 100BASE-TX (RJ-45) [100 m/328 ft.] WMBL 0 – 10,000 ft. altitude to 100BASE-FX 1550nm SM (SC) Wall Mount Bracket 4.0” [102 mm] [80 km/49.7 mi.] Link Budget: 29.0 dB Shipping Weight 2 lbs. [0.90 kg] WMBV E-100BTX-FX-05(XLW) Vertical Wall Mount Bracket 5.0” [127 mm] Safety Compliance Wall Mount Power Supply: 100BASE-TX (RJ-45) [100 m/328 ft.] UL Listed and CSA certified to 100BASE-FX 1550nm SM (SC) Regulatory Compliance FCC Class A, EN55024, EN55022 Class A, [120 km/74.6 mi.] Link Budget: 36.0 dB EN61000, CE Mark Single Fiber Products Warranty Lifetime 100BASE-TX to 100BASE-FX Stand-Alone

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products